ThomasNet Industrial Newsroom -

Power Distribution Terminal Blocks range from 63-160 A.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:17 -0500

Consisting of single or multiple busbars with wire screw connections, POLM Series offers current handling capacities of 63, 100, 125, and 160 A. Each busbar can accept 7-15 wires depending on model. Fully insulated housing covers, made from UL 94V0 polycarbonate, can be removed for access to wiring. Modules can be mounted onto standard DIN rails found in most control system and electrical cabinets, or directly mounted onto panel.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Rail Mounted Terminal Blocks | DIN Rail Terminal Blocks | Terminal Blocks | Power Distribution Systems | Busbars

Side-Entry Terminal Block has internal jumper system.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:16 -0500

Available in 2- to 24-pole configurations, 805 Series simplifies wiring via push-in and push-button actuated terminations. Each PCB block has 3.5 mm pin spacing for conductors AWG 24-16 and is UL/CUL-certified at 300 V/10 A. Internal jumper system, provided for commoning, conserves conductor capacity in high-density applications, while CAGE CLAMP®S Spring Pressure Connection Technology ensures terminations are vibration-proof, temperature cycling-resistant, and maintenance-free.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Printed Circuit Board (PCB) Terminal Blocks | Terminal Blocks

Cable Blocks safely guide cables around corners.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 08:23:40 -0500

Corner Cable Blocks are constructed with either 45° and 90° radiuses that ensure damage-free travel of fiber optic cable, coaxial cable, and innerduct around tight corners and bends. Roller assemblies provide snag-free gliding motion to simplify installation and 2 cable retaining rollers prevent cable from slipping off main roller. Accepting up to 1 3/8 in. dia cable/innerduct on 23 in. bending radius, 45° version weighs 8 lb 14 oz and 90° model weighs 13 lb 12 oz.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Cable Splicing Blocks

PCB Terminal Blocks are available in 3.5 and 3.81 mm spacing.

info@productnews.com (ThomasNet News) — Thu, 08 Oct 2009 08:29:13 -0500

Suited for space restricted applications, micro-miniature PCB Terminal Blocks are available in fixed position or modular 2 and 3 position settings that can be consolidated into any number of positions. Each block is made from UL94V0 plastic and has nickel-plated copper body with rising cage clamp design for easy re-termination. Capable of handling 10 A at 300 V, terminal blocks can be used with 30-16 AWG wire range.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Printed Circuit Board (PCB) Terminal Blocks

Miniature Terminal Blocks are available in 2-20 positions.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:26 -0500

Miniature Pluggable 3.5 mm and 3.81 pin spacing printed circuit board terminal blocks can handle wire range of 16 to 30 AWG and have UL rating of 8 A at 300 V. They are polarized and can only plug into header in one direction to prevent mis-mating.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Terminal Blocks

Terminal Blocks come in fuse disconnect and holder models.

info@productnews.com (ThomasNet News) — Thu, 10 Sep 2009 08:30:11 -0500

Suited for applications ranging from machinery to boats, 2002 Series TOPJOB®S Fuse Terminal Blocks include 4-conductor, mini-automotive fuse holder block and 4-conductor fuse disconnect block with spare pivoting 5 x 20 mm fuse holder, which ensures correct fuse insertion/removal and additional fuse storage. Offering 2 test plug locations on each side of fuse, blocks employ push-in terminations for ferruled or solid conductors and screwdriver actuation for stranded conductors.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Terminal Blocks

Cable Blocks safely increase cable placement production.

info@productnews.com (ThomasNet News) — Wed, 02 Sep 2009 08:33:24 -0500

Corner Cable Blocks come in 45° and 90° radius models that ensure damage-free travel of utility cables and innerducts around corners or bends. Featuring welded steel frames and polyurethane rollers, products accept up to 1 3/8 in. dia cable or innerduct on 23 in. bending radius. Each model has 2 cable retaining rollers that prevent cable or innerduct from slipping off roller assemblies, which provide snag-free gliding motion. Blocks evenly distribute load when pulling around corners.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Cable Splicing Blocks

PCB Terminal Block offers design flexibility.

info@productnews.com (ThomasNet News) — Wed, 19 Aug 2009 08:35:14 -0500

Standing 5 mm tall with 2.5 mm centerline, PTSM targets space-critical applications such as LED lighting, building automation, and power supply units. Spring-cage connector is rated for 6 A, and is available in 2 mounting technologies: pin-in-paste method or surface-mount technology. SMD anchors enable multiple wire termination and disengagement cycles.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Printed Circuit Board (PCB) Terminal Blocks

Terminal Blocks target high current applications.

info@productnews.com (ThomasNet News) — Fri, 14 Aug 2009 08:30:04 -0500

Constructed with high-tensile steel metal bodies to handle high clamping pressures, ASIUKH series is designed for applications that require terminating wire as large as 500 MCM and handling as much as 380 A at 600 V. Fully enclosed blocks do not require additional end covers for operation. Available with variety of accessories such as jumpers and markers, units suit applications requiring touch-proof terminations.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Terminal Blocks

PCB Terminal Block carries up to 115 A.

info@productnews.com (ThomasNet News) — Fri, 14 Aug 2009 08:30:03 -0500

Meeting 600 V UL and 1,000 V IEC ratings, pluggable PC 35 features standard screw-connection technology and accepts wires up to 2 AWG. Connector has through-panel mount capability and contact design that creates low insertion and withdrawal forces, which reduce mechanical stresses and possible damage to PCB solder joints. UL-rated for field wire termination, device suits applications including power electronics, frequency converters, and motor connections.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Printed Circuit Board (PCB) Terminal Blocks

Terminal Blocks come in 24, 32 and 41 A versions.

info@productnews.com (ThomasNet News) — Thu, 06 Aug 2009 08:28:43 -0500

Din rail mounted H Series is designed with spring clamp connection technology to facilitate installation. Power is distributed to smaller terminal blocks by using push in PTC jumpers. Jumpers are available in 2-47 positions, and main power feed terminal block is also available in version that allows for distributing 2 different voltages. Power can be distributed to a wide variety of terminal blocks including fuse blocks, circuit disconnect blocks, and multiple wire terminal blocks.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Spring Pressure Terminal Blocks | Power Distribution Blocks | Terminal Blocks | DIN Rail Terminal Blocks

Terminal Blocks feature staggered jumpering system.

info@productnews.com (ThomasNet News) — Tue, 07 Jul 2009 08:33:50 -0500

Accommodating AWG 22-12 conductors, TOPJOB®S disconnect, diode, and LED terminal blocks are available in 2-, 3-, or 4-pole variants with single-, double-, or triple-deck configurations. Each DIN-rail mount block features staggered jumpering system for potential commoning and push-in jumpers. CAGE CLAMP®S Spring Pressure Connection Technology ensures all terminations are vibration-proof, maintenance-free, and immune to temperature cycling.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Rail Mounted Terminal Blocks | Terminal Blocks | DIN Rail Terminal Blocks

Terminal Blocks are engineered for pick and place production.

info@productnews.com (ThomasNet News) — Wed, 10 Jun 2009 08:28:10 -0500

Compatible with re-flow soldering techniques, STH series terminal blocks use self-extinguishing halogen-free UL94 V-0 plastic housing material and have temperature tolerance of up to 270ºC. They are offered in pitches of 3.81-15.0 mm in modular or side-stackable configurations with 2-6 pole individual units. Available in choice of straight, angled, or 90º wire entry, accepting wire sizes of from 2-16 AWG, wire retention is achieved through spring or clamping.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Terminal Blocks

Junction Blocks accommodate multiple sensors.

info@productnews.com (ThomasNet News) — Mon, 01 Jun 2009 08:22:45 -0500

Available in 4, 6, and 8-port models, Zip-Port(TM) Multiport Junction Blocks allow multiple sensors to be wired to single block with one cable connecting to control panel. Units come in field wireable or 5 m cable versions with 4 and 5-pin M12 connectors, and choice of 1 or 2 I/O per port. Providing 24 Vdc and 120 Vdc/ac operation in temperatures from -4 to +176°F, blocks feature IP67 protection rating when all ports are connected or covered with protective caps.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Terminal Blocks | Junction Blocks & Bases

Terminal Blocks come with integrated PE grounding foot.

info@productnews.com (ThomasNet News) — Tue, 26 May 2009 08:27:19 -0500

Series UT 4-PE terminal blocks offer termination for grounding shields used in shielded twisted-pair wires for analog and digital sensors. Integrated PE foot is available in 6.2 mm versions of UT 4 knife disconnect, diode and fuse terminal blocks. Blocks provide options to disconnect or use universal lever-style fuse holder for 5 x 20 plugs with or without light indication. Compact design with uniform dual-bridge channel delivers power distribution with FBS push-in jumpers.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Terminal Blocks

PCB Terminal Block features lever-actuated termination.

info@productnews.com (ThomasNet News) — Fri, 10 Apr 2009 08:29:12 -0500

Suited for field wired installations, 2716 Series enables tool-free termination of 24-6 AWG conductors. Spring pressure CAGE CLAMP® assures that terminations are gas-tight, as well as resistant to vibration and temperature cycling. Standard configurations include 10 and 15 mm pitch variants rated at 55 A/600 V and 65 A/600 V, respectively. Available with or without jumper slot, terminal blocks include integrated test port that allows probe access with direct contact to current bar.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Printed Circuit Board (PCB) Terminal Blocks | Spring Pressure Terminal Blocks

Terminal Block is rated for 600 V leads.

info@productnews.com (ThomasNet News) — Mon, 06 Apr 2009 08:31:18 -0500

Providing maintenance-free, push-in terminations for solid or ferruled conductors, 2000 Series TOPJOB®S 3.5 mm wide terminal block offers vibration-proof terminations to space-restricted machinery and building installations requiring conductors 16-24 AWG. Stripped stranded conductors are terminated via screwdriver actuation. Product is available in 2-, 3-, and 4-conductor feed through and ground terminal blocks.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Terminal Blocks | Screw-to-Tab Terminal Blocks | DIN Rail Terminal Blocks

PCB Terminal Blocks offer current capacity up to 18 A.

info@productnews.com (ThomasNet News) — Fri, 03 Apr 2009 08:38:14 -0500

Suited for appliance industry, CUF and CUM Pluggable Terminal Blocks feature divisible molding design that allows ASI or customer to cut 36-position header or plug to any number of circuits. Connector plug and header have molded-in polarization feature, which allows for mating and un-mating in proper position, eliminating possibility of turning plug in opposite direction. Wiring connection to plug uses rising-cage clamp design and has rating of 12-24 AWG.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Printed Circuit Board (PCB) Terminal Blocks

Assemblies combine multiple feedthroughs on single plate.

info@productnews.com (ThomasNet News) — Thu, 02 Apr 2009 08:40:22 -0500

Custom-designed and fabricated Portplate Assemblies come fully assembled with pre-tested multiple feedthroughs. Plates can house variety of connector densities and counts, as well as mating connectors and fiber optic bulkheads. Provided with or without connectors, assemblies offer full strain relief and are available in 6-48 in. dia sizes. Finished, ready-to-pump plates accommodate mixed configurations including those from Ductorseal®, Studseal(TM), Optiseal(TM), and Potcon(TM) product families.

This story is related to the following:
Electronic Components and Devices
Mechanical Power Transmission
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Terminal Assemblies | Feedthroughs | Electric Wiring Devices

Terminal Blocks provide safe disconnect.

info@productnews.com (ThomasNet News) — Tue, 24 Mar 2009 08:32:34 -0500

Suited for power generation, utilities, and semiconductor manufacturing industries, ME Series Test Disconnect Terminal Blocks provide safe disconnect capability between measuring transducers and safety equipment in current transformer shorting applications. Available with screw, spring-cage, and push-in connection technologies, each block has set of 3 bridging channels on either side of screw-free disconnect lever. Pluggable shorting component can lock into one bridging channel.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Terminal Blocks