ThomasNet Industrial Newsroom -

Powder Additive eliminates efflorescence in mortars.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Feb 2008 07:55:49 -0500

Redispersible powder additive, ELOTEXÂ® ERA100, forms microscopic particles that seal pores in stuccos, tile grouts, skim coats, cement powder paints, and other cement-based mortar systems. Preventing chemicals that cause efflorescence from migrating to surface results in clean, bright, unblemished architectural appearance. Compatible with other additives, this active, resin-based compound has no detrimental effects on working properties and also increases water repellency.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Cement Additives

Epoxy Resin Compound features high thermal conductivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 Feb 2007 07:17:44 -0500

Suitable for use in both thick/thin sectioned configurations, EP21TDC-2LO bonding, sealing, coating, and encapsulation system has thermal conductivity of 9 BTU/in./ftÂ²/hr/Â°F and volume resistivity of 1,012 <font face='Symbol'>W</font>cm. With service operating temperature range of 4 K to 250Â°F, room temperature curable product features Shore D hardness of 36, elongation of 50%, 1:3 mix ratio by weight or volume, working life of 90 min for 100 g mass, tensile strength of 1,070 psi, and T-peel strength of 15 pli.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Materials and Material Processing
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Epoxy Adhesives | Thermally Conductive Adhesives | Adhesive Coatings | Conductive Coatings | Epoxy Coatings | Thermally Conductive Coatings | Adhesive Compounds | Conductive Compounds | Encapsulation Compounds | Adhesive Resins | Encapsulation Resins | Epoxy Resins

Ceramic Cement may be used in temperatures over 1000Â°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Jan 2007 07:18:21 -0500

Suited for use in electronic devices, Grade C-3 single-component, polysilicate-based cement acts as electrical insulator and bonds to any clean wettable surface. Chemical-setting, inorganic cement exhibits dimensional stability, allowing less than 1% shrinkage at temperatures up to 1,093Â°C. Resistant to thermal shock, asbestos-free product is stable in hostile gaseous environments and will not produce any toxic fumes or off-gases when bonding ceramics, metals, quartz, or glass.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Heat Resistant Cement | High Temperature Cement

Stone Mortar suits veneer and tuck-pointing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 May 2006 08:07:59 -0500

Contractor grade blend of Portland cement, hydrated lime, masonry sand, and other ingredients, QUIKRETEÂ® Veneer Stone Mortar is available in standard gray or colored for use in mortar joint applications. Mortar formulation complies with ASTM 270 and ASTM C 387 requirements and is suitable as bonding coat to adhere stone to wall or as scratch coating applied over expanded metal lath. Polymer-modified and water-resistant formulation of product is also available.

This story is related to the following:
Chemical Processing and Waste Management
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Brick, Masonry & Stone Mortar | Mortar Cement

Admixture reduces mortar and concrete freeze.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Feb 2006 07:06:46 -0500

Recommended for use during cool and cold weather, HYDRASET-FREEÂ® non-chloride concrete set accelerator speeds construction by shortening initial set and curing time. Workability and strength are obtained when temps are in 50-65Â°F range without reduction in cement hydration rate. Product is available in 5 gal pails and 55 gal drums.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Cement & Concrete Admixtures

Graphite Cement creates bonds stronger than substrates.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 18 Aug 2005 09:22:51 -0500

Grade GC joins all forms of rigid, flexible, and machined carbon and graphite shapes. It cures to 100% carbonaceous bond with thermal conductivity and remains secure to 5,432Â°F in non-oxidizing atmosphere. When used as joint compound for furnace electrodes, it locks joint and lowers joint electrical resistivity. Product may also be used to repair cracked, chipped, or broken graphite trays, boats, heating elements, susceptors, dies, and electrodes.

This story is related to the following:
Chemical Processing and Waste Management

Concrete Patch repairs potholes in 1 hr.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 26 Jan 2004 07:42:48 -0500

Hy-Speed 500â"¢ emergency repair cement becomes a concrete-hard mass ready for traffic in 1 hr. It expands as it sets, becoming permanent patch that exhibits 3x strength of concrete. Product requires users to add water, mix, then pour. It needs no priming, leveling, or troweling and comes in 5 gal pails.

This story is related to the following:
Chemical Processing and Waste Management
Construction Equipment and Supplies
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Concrete Patchers | Patching & Repairing Cement

Potting Compound handles temperatures to 2800Â°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2003 07:36:20 -0500

Grade H-115 thermally conductive, electrically insulating ceramic cement resists thermal shock, withstands rapid heating or cooling at wide temperature fluctuations, and prevents vibration-loosening of components. Supplied as single-component, dry, white powder, compound sets by chemical reaction, forming near impervious ceramic within 16 hr. Compound does not contain asbestos or other fibers and produces no noxious off-gasses when curing.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: High Temperature Cement | Potting Compounds

Floor Repair Material does not spread to surrounding areas.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 19 Apr 2002 07:44:21 -0500

F-161 MAGIC FLOOR(R) provides permanent repair to indoor or outdoor floors. Application steps includes priming, spreading MAGIC FLOOR into cracks or holes, and compressing. Patch sets up and is immediately ready for traffic. Its shatterproof aggregate and thermoplastic binder material adheres to hard surfaces and hardener prevents tracking onto surrounding concrete.

This story is related to the following:
Chemical Processing and Waste Management
Cleaning Products and Equipment
Construction Equipment and Supplies
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Patching & Repairing Cement | Floor Maintenance Equipment & Supplies | Floor Patching & Resurfacing Materials

Concrete Repair Formulation suits high-traffic areas.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Mar 2002 08:11:30 -0500

Traffic Fast(TM) mix and pour, shallow crack concrete repair sets up in 2 hours. High-bond liquid polymer stands up to industrial use. Self-leveling Traffic Fast eliminates need for extensive key cutting. Suitable for use on loading docks, shipping/receiving platforms, bridge decks, warehouse, and plant traffic lanes, Traffic Fast binds instantly without priming.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing
Construction Equipment and Supplies
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Patching & Repairing Cement | Floor Patching & Resurfacing Materials | Concrete Repair Materials