ThomasNet Industrial Newsroom -

Silicon Protection Arrays offer ESD protection of ±30 kV.

info@productnews.com (ThomasNet News) — Fri, 20 Nov 2009 08:27:09 -0500

Low pass, C-R-C filters in SP6001 Series feature line capacitance of 24 pF with cut-off frequency of approximately 115 MHz, while SP6002 Series filters have line capacitance of 30 pF with cut-off frequency of about 100 MHz. Each series includes 4- and 6-channel versions that provide attenuation of less than or equal to -30 dB from 800-3,000 MHz. Silicon protection arrays meet IEC61000-4-2 standard and have 6 V reverse standoff voltage with leakage under 1 µA.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: Transient Voltage Surge Protectors | Transient Suppressor Diodes | Circuit Protectors

Zener Diode Barriers include features for hazardous areas.

info@productnews.com (ThomasNet News) — Tue, 17 Nov 2009 08:44:56 -0500

Offering both relay and solid-state switch models, MZB Series limits excess energy before it reaches hazardous area. Units feature removable terminals, bussed power feed, and channels as small as 6.3 mm wide. Each channel is fitted with 2 stages of pulse-tested Zener diodes and infallible terminating resistor. If electrical fault occurs in non-hazardous area of barrier, Zener diodes limit voltage available to hazardous area circuits, while series resistance limits current.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Solid State Switches | Voltage Relays | Safety Relays | Current Limiting Relays | Current Limiters | Zener Diodes

LED Modules employ ambient temperature sensing technology.

info@productnews.com (ThomasNet News) — Mon, 16 Nov 2009 08:34:24 -0500

Series BB03 AV features constant voltage design using 3 Nichia® LEDs that can be grouped together in luminaires to create any desired level of light. Thermadjust(TM) technology decreases LED failure in high-temperature environments by causing LED modules to automatically adjust output if malicious ambient thermal conditions exist. Modules are engineered to ensure junction temperature of LEDs will always be maintained at or below levels required for proper performance and life of LEDs.

This story is related to the following:
Electronic Components and Devices
Green & Clean

Search for suppliers of: LED Light Engines

Neutral White A19 LED Light Bulbs replace 25 and 40 W bulbs.

info@productnews.com (ThomasNet News) — Fri, 13 Nov 2009 08:31:52 -0500

Available with typical efficiency of 90 Lumens/W, 25 W equivalent LED A19-25-1N-I and 40 W equivalent LED A19-40-1N-I are designed for downlight and indoor general lighting applications. Model LED A19-25-1N-I delivers 190 Lumens utilizing 2.1 W, while LED A19-40-1N-I delivers 345 Lumens consuming 3.8 W. These 3,500 K LED replacement lamps feature Recycle Reflectance(TM) optics technology, to reduce overall glare and deliver extremely uniform and smooth light output.

This story is related to the following:
Electronic Components and Devices
Vision Systems
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Green & Clean

Search for suppliers of: Light Emitting Diode (LED) Lamps | Energy Saving Lamps | Light Bulbs

Light Emitting Diode provides warm white light.

info@productnews.com (ThomasNet News) — Fri, 13 Nov 2009 08:31:46 -0500

Targeted specifically at residential sector, Warm White LED features color temperature of 3,000 K, color rendering index of 82, and efficiency of 104 lm/W. Color location is precisely on Planckian curve, and light is exactly white, showing no shift to green spectral region. With operating current of 350 mA and chip surface of 1 mm², LED achieves brightness of 124 lm.

This story is related to the following:
Electronic Components and Devices
Green & Clean

Search for suppliers of: Light Emitting Diodes (LED)

MultiLED offers homogenous display results.

info@productnews.com (ThomasNet News) — Fri, 13 Nov 2009 08:31:44 -0500

Developed for video display market, LRTB GFTM MultiLED uses in-line arrangement of chips, providing homogeneity and high color fidelity across entire viewing angle. Device's black surface enables optimal contrast in both indoor and outdoor environments. Housed in 6-lead package that delivers thermal management, MULTILED utilizes Thinfilm and ThinGaN technologies and contains no lead or mercury.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Light Emitting Diodes (LED)

Fiber-Coupled Laser Modules are offered in 488 and 532 nm versions.

info@productnews.com (ThomasNet News) — Thu, 12 Nov 2009 08:32:47 -0500

FiberTECII(TM) Series laser modules integrate electronics with DC power operation for laser diode drive and protection, direct modulation of output power, and feedback functions. Units include micro lens that transforms elliptical beam into circular one, optimizing efficiency of coupling power into fiber. Various wavelength and power options are available, including 488, 532, 405, and 635 nm products. Modules suit medical, bioanalytical, and automated instrumentation.

This story is related to the following:
Optics and Photonics
Electronic Components and Devices

Search for suppliers of: Laser Modules | Diode Modules | Fiber Coupled Diode Lasers

Monolithic Power MOSFET features integrated Schottky diode.

info@productnews.com (ThomasNet News) — Mon, 09 Nov 2009 08:39:31 -0500

Using TrenchFET Gen III silicon, SkyFET® Si462DY delivers max RDS(on) of 3 mW at 10 V gate drive and 3.8 mW at 4.5 V. Device optimizes power conversion efficiency at light loads for mains-powered servers and battery-operated notebooks. Integration of Schottky into MOSFET silicon chip eliminates parasitic inductances that would be present if they were mounted to PCB as individual components or if separate MOSFET and Schottky diode components were co-packaged.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: MOSFET's | Schottky Diodes

SMT RGB LED features square package design.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:41 -0500

Measuring 10 x 10 mm, 3 W TitanBrite(TM) LED contains three 1 W dies in red, green, and blue. Square shape is useful for applications that require optimal resolution for up-close viewing and for integration of dynamic, smaller images. RGB light allows for adjustable color tuning and can create shades of white, as well as every other color in visible spectrum. Applications include electronic signage, safety/security lighting, general illumination, and graphic backlighting.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Surface Mount Diodes | Light Emitting Diodes (LED)

Lighting-Class LEDs deliver 100 lumens of light.

info@productnews.com (ThomasNet News) — Tue, 03 Nov 2009 08:38:40 -0500

XLamp® XP-C LEDs come in cool white with up to 107 lumens at 350 mA. Warm white models are available up to 80 lumens at 350 mA. They are offered in ANSI-compatible chromaticity bins for cool and neutral white and in ANSI-compatible warm white bins.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Green & Clean

Search for suppliers of: LED Lighting | Light Emitting Diodes (LED)

LED Bench Light combines bright illumination, energy savings.

info@productnews.com (ThomasNet News) — Tue, 03 Nov 2009 08:38:34 -0500

Wolf EcoFlex features grooved aluminum head that rotates 340° vertically and 90° horizontally and incorporates four 1 W dimmable white LEDs that are optically mixed to produce even light pattern. Thermal engineering allows LEDs to achieve rated life of 50,000 hr, and 25 in. flexible arm lets user aim light where it is needed. Designed to be environmentally friendly, lamp offers light intensity of 500 fc at 12 in.; 2,000 fc at 6 in.; and 5,000+ fc at 3 in. or less.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Vision Systems
Green & Clean

Search for suppliers of: Task Lighting | LED Lights | Adjustable Machine & Bench Lamps | Light Emitting Diode (LED) Lamps

Diode Array protects high-speed data interfaces from ESD.

info@productnews.com (ThomasNet News) — Mon, 02 Nov 2009 08:40:59 -0500

Supplied in lead-free, 2 x 2.2 mm, 5-pin SC70 package, MAX14541E protects 3-channel data interfaces from ESD spikes up to ±15 kV (Human Body Model). Input capacitance, rated at 6 pF typ, prevents signal distortion in high-speed applications. Meanwhile, leakage current of less than 1 nA results in minimal impact for end application. Array is specified over -40 to +125°C range and suits glucose meters, cell phones, media players, PDAs, and other portable applications.

This story is related to the following:
Electronic Components and Devices
Materials and Material Processing

Search for suppliers of: Diode Arrays | ESD Products

MR16 LED Lamps have eco-friendly design.

info@productnews.com (ThomasNet News) — Thu, 29 Oct 2009 08:32:06 -0500

With single chip construction utilized for precise focus and optical properties, Z-MR16-5W series of MR16 LED lamps suit applications for illuminating display cases, shelving, and cabinets. RoHS compliant units are offered in range of whites, from 2,700-7,200 K, and illumination angles of 10°, 38°, and 60°. Devices operate from 12 V LED power and are available with two sockets: 2993-G5 with brass insert for mounting and 2993-G6 with standard mounting holes.

This story is related to the following:
Electronic Components and Devices
Vision Systems
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Green & Clean

Search for suppliers of: Light Emitting Diode (LED) Lamps

PIN Photodiodes/Phototransistors are automotive-qualified.

info@productnews.com (ThomasNet News) — Tue, 27 Oct 2009 08:38:02 -0500

Qualified to AEC-Q101, TEMD7x00X01 PIN photodiodes and TEMT7x00X01 phototransistors come in 0805 SMT package that measures 1.25 x 2.0 x 0.85 mm and are available with spectral sensitivity to UV, visible, and NIR or NIR only. Photodiodes combine 100 ns response time with spectral sensitivity range of 350-1,120 nm or 750-1,050 nm, while phototransistors offer light current of 450 µA and spectral sensitivity range of 470-1,090 nm or 750-1,010 nm with visible light filtering epoxy.

This story is related to the following:
Optics and Photonics
Electronic Components and Devices

Search for suppliers of: Phototransistors | Photodiodes

Ceramic LED suits light clusters on mid-range vehicles.

info@productnews.com (ThomasNet News) — Tue, 27 Oct 2009 08:38:01 -0500

Designed mainly for daytime running lights, OSLON MX ECE is energy-efficient LED that can be installed in headlight system or incorporated in fender as individual light. Unit is manufactured as 1 W component with light output of 70-95 lumens and can be operated at temperatures up to 150°C. Measuring 3 x 3 mm², LED is suitable for DRL applications.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: LED Lights | Automotive Lights | Light Emitting Diodes (LED)

Warm White LED replaces No. 85 incandescent bulb.

info@productnews.com (ThomasNet News) — Tue, 27 Oct 2009 08:37:58 -0500

Offering direct LED replacement for 28 V incandescent T-1 ¾ wedge base No. 85 bulbs in many switch and indicator applications, Warm White LED closely matches light characteristics of incandescent bulbs. It can therefore be used behind all colored lenses without changing spectral characteristics. Since LED runs on AC or bipolar DC, correct polarity matching is not required.

This story is related to the following:
Electronic Components and Devices
Vision Systems
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Light Emitting Diode (LED) Lamps | Light Bulbs | LED Lights

Silicon Diode Arrays offer ESD protection.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:35 -0500

Available in 1.6 x 1.6 x 0.5 mm µDFN-6 and SOT23-6 packages, SP3002 Series provides ESD protection per IEC61000-4-2 for electronic devices with input capacitance of 0.85 pF. Four-channel units with integrated zener diode have 6 V reverse standoff voltage with low leakage of less than 1 µA and low dynamic resistance of 1.1W. Compliant with RoHS, Model SP3002-04UTG is particularly suitable for high speed port protection in mobile devices.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Silicon Diodes | Zener Diodes | Diode Arrays

Surge/Lightning Protection Array features 2 pF capacitance.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:34 -0500

Housed in SOT23-6 package, SP3050 Series suppresses large surge/lightning transients per IEC61000-4-5. Four-channel diode array features integrated zener diode and is suitable for secondary or tertiary protection in 10/100/1000 Ethernet applications. It is also usable in USB 2.0 applications where enhanced level of ESD protection is required. Compliant with RoHS, unit has 6 V reverse standoff voltage with low leakage of ≤1 µA and dynamic resistance under 0.7 W.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: Transient Voltage Surge Protectors | Diode Arrays | Lightning Protectors

Compact IR LED is optimized for power.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:29 -0500

Built on 1 mm² ThinFilm chip with 2 stacked p-n junctions, IR Platinum Stack DRAGON can generate optical output of nearly 1 W from driving current of 1 A for space-limited automotive/industrial/consumer applications. Viewing angle and radiant intensity can be varied with standard secondary optics, and forward voltage is 2.9 V at 1 A. With wavelength of 850 nm, IR LED offers compromise between max spectral sensitivity for CCD and CMOS cameras and suppressed visibility for human eye.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Light Emitting Diodes (LED)

LED Clearance Marker Lamps are rated up to 12.8 Vdc.

info@productnews.com (ThomasNet News) — Fri, 09 Oct 2009 08:23:55 -0500

Compact LED Mini Combination Clearance Marker Lamps help users to keep vehicle illumination up to SAE DOT P2PC standards. They feature 3 SMD LEDs enclosed in sealed acrylic housing, with attached rubber grommet that fits into ¾ in. hole and is pre-wired with 6 in. jacketed leads.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Vision Systems

Search for suppliers of: Automotive Lamps | Light Emitting Diode (LED) Lamps