ThomasNet Industrial Newsroom -

Weatherproof Sealant is designed for tilt-up construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Aug 2008 07:36:38 -0500

Manufactured in one color and single limestone 5 gal unit configuration, Tilt-Seal(TM) is one-component, solvent-free, non-toxic, and environmentally friendly water-based acrylic latex sealant that comes with low VOC content, and features color stability and resistance to ultraviolet rays, ozone, and airborne contaminants. It can be painted within 24 hr, enables easy clean-up with water, and offers primerless adhesion to pre-cast concrete.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management
Construction Equipment and Supplies

Search for suppliers of: Adhesive Sealants | Acrylic Sealants | Construction Sealants | Environmentally Friendly Sealants | Paint Sealants

Acrylic Adhesives suit electronics applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 08:02:07 -0500

ARclad® 92262 and ARclad® 92264 electrically conductive adhesives exhibit adhesion to film and metal substrates, including Kapton®, gold, and stainless steel. ARclad® 92262 1.8 mil adhesive bonds to EMI shields, ground plane assemblies, and electrical interconnections. Designed for capacitance sensors, multi-pin connectors, and other fine pitch signal applications, ARclad® 92264 2.0 mil adhesive allows overlapping of multiple contacts without electrical cross-talk occurring.

This story is related to the following:
Chemical Processing and Waste Management
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Acrylic Adhesives | Film Laminating Adhesives | Electrically Conductive Adhesives | High Temperature Adhesives | Laminating Adhesives | Metal Bonding Adhesives | Pressure Sensitive Adhesives

Acrylic Polyurethane Coating features VOC of less than 50 g/L.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:51 -0500

Meeting performance properties of solvent-borne systems without associated health and safety hazards, Aqua - Thane 2K water-borne coating exhibits abrasion, solvent, and chemical resistance including Skydrol, and maintains hardness. Film build of 4-8 mil wet is achieved without foaming, gassing, or flow problems. HAPS free system offers adhesion to steel, aluminum, galvanized metals (both electroplated and hot-dipped), and various stainless steel, PVC, and carbon/fiberglass composites.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management
Material Handling and Storage

Search for suppliers of: Environmental Coatings | Abrasion Resistant Coatings | Acrylic Coatings | Chemical Resistant Coatings | Polyurethane Coatings | Water Borne Coatings | Coating Systems

Acrylic Adhesive promotes assembly, laminating productivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 03 Jun 2008 07:42:13 -0500

Designed for use by OEMs, FFVSA exhibits optimal grab and holding power when applied to wood, painted surfaces, and plastics. It is .005 in. thick, comes in widths from 3/16-54 in., and resists damage from water, humidity, and UV rays. Offered on 180 yd long standard rolls, product is suited for splicing fabric, film, and foil; laminating nameplates, metal, foams, and fabrics; as well as general-purpose mounting and holding.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Adhesive Tapes | Acrylic Adhesives

Transfer Adhesive attaches membrane to structural framing.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:09 -0500

For structural and decorative use, Unifilm® U802 is used to attach architectural tension membranes to wide array of metal frames. Product laminates to variety of substrates including low surface energy plastics and untreated polyolefins. It provides high initial adhesion and builds to peel strength of 149 oz/in. Able to withstand environmental extremes, acrylic transfer adhesive offers UV, humidity, chemical, and temperature resistance.

This story is related to the following:
Chemical Processing and Waste Management
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Acrylic Adhesives | Transfer Adhesives | Structural Adhesives | Construction Adhesives

Lightweight Coating creates polished/cut granite appearance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Apr 2008 07:44:22 -0500

Suited for new construction or renovation, StoCreativ® Granite acrylic-based interior and exterior wall finish is trowel-applied and comes in 10 colors. Use of this product, which is compatible with Sto Classic Wall Claddings (including Sto Classic NExT®), helps incorporate natural looks and colors in finished walls.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management

Search for suppliers of: Acrylic Coatings | Finishes

Flexible Light Cure Adhesive suits medical device assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:55:09 -0500

Curing tack-free within seconds, Loctite® 3974(TM) permanently bonds materials with differing coefficients of thermal expansion and accommodates substrate expansion/contraction. Single-component acrylic adhesive cures upon exposure to UV or visible light and can be used on glass, thermoplastic, and metal assemblies for medical device bonding, potting, and sealing applications. Characteristics include A70 Shore hardness and 100% elongation.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Medical Device Adhesives | Acrylic Adhesives

Adhesives are suited for magnet bonding.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Apr 2008 07:36:34 -0500

Loctite® 331(TM) Structural Adhesive is acid-free, 2-step acrylic that fixtures in 20 sec and develops full strength in 30 min, bonding magnets and metals of all sizes. Designed for filling large gaps, Loctite® 3060(TM) Structural Adhesive is acid-free, 2-component, external-mix acrylic featuring 2 cascading adhesive streams that automatically mix together. Loctite® E-220IC(TM) Hysol® Epoxy Adhesive is acid-free, 1-component epoxy designed for induction cure operations.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Structural Adhesives | Epoxy Adhesives | Acrylic Adhesives

Acrylic Transfer Adhesives are used in mounting, assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 02 Apr 2008 07:42:32 -0500

Resistant to heat, chemicals, and plasticizers, Ultrafilm(TM) 6300-001 and 6500-001 are designed for sound attenuation, vibration dampening, rubber extrusion mounting, and general product assembly applications. They bond to various surfaces, including ether and ester foams, rubbers, metals, and engineered plastics, and supplied with 4 mil white HDPE liner. Acrylic adhesive used in Ultrafilm 6300-001 and 6500-001 is, respectively, 3 and 5 mils thick.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Adhesive Film | Transfer Adhesives | Acrylic Adhesives

Conformal Coating is quick-drying and toluene-free.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Dec 2007 07:33:50 -0500

Based on Hysol PC52 platform, Hysol® PC62 is one component solvent-based acrylic conformal coating that provides environmental and mechanical protection for printed circuit boards (PCBs). UL746 and IPC-CC-830 compliant product can be applied with non-atomized selective spray coating equipment, and is suited for harsh conditions in automotive, military, aerospace, industrial, and consumer avionics applications.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Chemical Processing and Waste Management

Search for suppliers of: Solvent Based Coatings | Acrylic Coatings | Conformal Coatings

Adhesives come in 3 types for range of applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Dec 2007 07:44:23 -0500

Designed to cure to tough plastic in absence of oxygen and in presence of metal, Rite-Lok Anaerobic Adhesives are suited for threadlocking, retaining, gasketing, and sealing. Rite-Lok Cyanoacrylate Adhesives, also known as instant adhesives, are liquid and gel formulations designed to cure in seconds to bond many substrates. Two-step Rite-Lok Structural Acrylic Adhesives can bond different substrates, such as metal to stone, plastic to metal, metal to metal, plastic to plastic.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Cyanoacrylate Adhesives | Anaerobic Adhesives | Acrylic Adhesives

Adhesive Tie Layer bonds acrylic and olefinic materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Nov 2007 07:40:45 -0500

Used to bond acrylic layer onto substrate of thermoplastic polyolefin (TPO) for use in thermoforming applications, ADDHERE(TM) tie layer promotes gloss, depth of image, and surface durability. Pelletized material can be co-extruded with TPO substrate, to which acrylic film rollstock can be laminated in-line, or sheet producers can tri-extrude each of 3 materials (acrylic, tie layer, and TPO) from melt phase to produce multi-layer sheet. Product is colorable and recyclable.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Thermosetting & Thermoplastic Adhesives | Acrylic Adhesives

Adhesive is formulated for automobile interior applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 Nov 2007 07:46:08 -0500

Able to withstand hot shear tests at 150°F for more than 50 hr, ROBOND(TM) Prohesion water-based, pressure sensitive acrylic adhesive is suited for door panels, interior pillars, instrument panels, and ductwork. Humidity resistant product retains more than 80% of its peel after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Bonding agent exhibits anchorage to substrates with both high and low surface energy.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Water Based Adhesives | Acrylic Adhesives | Pressure Sensitive Adhesives

Acrylic Pressure-Sensitive Adhesive offers heat resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 19 Oct 2007 07:44:10 -0500

Designed for pressure-sensitive tapes and other applications traditionally served by solvent-based adhesives, water-based ROBOND(TM) Prohesion withstands hot shear tests at 150°F for more than 50 hr and retains more than 80% of its peel adhesion after prolonged exposure to moisture under severe conditions of 90% humidity at 95°F. Product adheres aggressively and exhibits optimal anchorage to substrates ranging from high surface energy to low surface energy.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Pressure Sensitive Adhesives | High Temperature Adhesives | Acrylic Adhesives

Acrylic Latex Polymer coats steel and concrete surfaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jul 2007 08:03:44 -0500

Avanse(TM) MV-100 waterborne acrylic latex polymer is low VOC emitting emulsion that meets all federal and state VOC regulations in formulated coatings. Formulated to withstand harsh environments associated with industrial coating applications, it is suited for primers, topcoats, and direct-to-metal finishes. Polymer optimizes distribution of pigment within dried film and provides corrosion resistance and durability.

This story is related to the following:
Materials and Material Processing
Chemical Processing and Waste Management

Search for suppliers of: Polymers | Water Based Emulsions

Resin enables green insulation manufacturing.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Jun 2007 07:44:22 -0500

Aquaset(TM) acrylic thermosetting binders provide building insulation manufacturers with green alternative to formaldehyde in production of fiberglass batting. Water-based acrylic offers sustainable chemistry that is non-combustible, non-hazardous, recyclable, and non-flammable. Stable at room temperature, resins do not require refrigeration. Binders produce only water during curing process and reduce amount of particulates in work environment.

This story is related to the following:
Printing and Duplicating Equipment
Chemical Processing and Waste Management

Search for suppliers of: Binders | Thermosetting Resins | Acrylic Resins

Light Cure Adhesives suit bonding and potting applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Jun 2007 07:44:45 -0500

Designed to cure in seconds upon exposure to light in visible spectrum, Loctite® Indigo(TM) 3552 and 3553 feature viscosities of 200 and 3,500 cp, respectively. They are suited for use with UV-blocking clear and select colored substrates including translucent variations of blue, purple, gray, white, and green. Both acrylic adhesives are ISO 10993 biocompatibility tested, offer fluorescence for inspection, and adhere to various plastics including polycarbonate, PVC, and ABS.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Acrylic Adhesives | Plastic Adhesives

Transdermal Adhesive is for use with drug patches.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Feb 2007 07:55:54 -0500

DURO-TAK(R) acrylic solution pressure sensitive adhesive is designed to enable dispersed drug patch formulations. Supplied in non-polar cyclohexane solvent, it is targeted at specific drugs that have low solubility in non-polar solvents, and simplifies preparation of dispersed drug-in-adhesive patches by reducing potential for supersaturation.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Transdermal Adhesives | Pressure Sensitive Adhesives | Acrylic Adhesives

Acrylic Adhesive targets transdermal patch developers.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Feb 2007 07:55:54 -0500

Providing high level of drug solubility for hydrophilic drugs such as nitroglycerin, DURO-TAK® 87-202A is supplied in organic solvent solution. Self-curing, pressure-sensitive adhesive also offer high moisture vapor transmission rate, which contributes to long wear times, especially when used with non-occlusive or semi-occlusive backings.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Pressure Sensitive Adhesives | Acrylic Adhesives

Acrylic Adhesive joins aluminum materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jan 2007 07:15:04 -0500

With LORD Accelerator 19GB Gray mix-in curative, LORD 400 Series Acrylic Adhesive will bond variety of prepared or unprepared aluminum materials. Accelerator allows precise control of adhesive bondline thickness due to its content of 0.01 in. dia glass beads. Used for cars, trucks, specialty vehicles, and boats, cured adhesive distributes stress, acts as sealant, helps prevent corrosion, and maintains original mill finish of exterior surface of thin panels.

This story is related to the following:
Chemical Processing and Waste Management
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Acrylic Adhesives | Automotive Adhesives | Metal Bonding Adhesives