ThomasNet Industrial Newsroom -

Surface Mount Resistor is available in 0603 chip size.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:35 -0500

Model VSMP0603 Bulk Metal® Z-Foil (BMZF) wraparound surface-mount resistor offers TCR of ±0.2 ppm/°C from -55 to +125°C, tolerance of ±0.01%, and 1 nsec rise time. Featuring load-life stability of ±0.005% at +70°C for 2,000 hr at rated power, it offers resistance values from 100 W to 4 kW. Device is rated for power levels up to 50 mW at 70°C and can withstand ESD in excess of 25 kV. VSMP0603 meets EEE-INST-002 specifications and MIL-PRF 55342.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Surface Mount Resistors | Precision Resistors | Military Specification Resistors | Chip Resistors | Surface Mount Resistors | Precision Resistors | Military Specification Resistors | Chip Resistors | Surface Mount Resistors | Precision Resistors | Military Specification Resistors | Chip Resistors

Terminal Block comes in compact board-mounting configuration.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:34 -0500

Available in 2-8 positions with black or green UL 94V-0-rated housings, Terminal Block provides current capacity of up to 125 A and 1,000 V, and offers 15 mm pitch to allow both factory and field wiring to bring high currents to PCBs for industrial devices. It features space-saving side wire entry, rising cage screw termination, 2 dual-pin through-hole connections per circuit to provide mechanical stability, and built-in test points that allow measurements to be taken.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Terminal Blocks

Stainless Steel Electrodes meet military approval.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:33 -0500

Arcos 347 stainless steel electrodes are manufactured for high temperature welding applications. Bare version of ER347 welds chromium-nickel base metals of similar composition stabilized with columbium or titanium, and can be used for welding base metals 302, 320, and 347. Developed for 302, 304, 321, and 347 welding grades, covered version of E347 is utilized where conditions require maximum resistance to corrosion and where weld metal is subject to temperatures above 700°F.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Welding Equipment and Supplies

Search for suppliers of: Welding Electrodes | Stainless Steel Electrodes | Welding Electrodes | Stainless Steel Electrodes | Welding Electrodes | Stainless Steel Electrodes

Current Sensing Chip Resistor offers ±0.2% tight tolerance.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:32 -0500

Along with instantaneous thermal stabilization time and 1.0 ns rise time, SMT VCS1625Z provides industrial-grade absolute TCR of ±0.05 ppm/°C (0 to +60°C) and ±0.2 ppm/°C (-55 to +125°C), power coefficient of ±5 ppm at rated power (5 W), and tolerance of ±0.2%. Load-life stability is ±0.02% at +70°C for 2,000 hr. Resistive components' sensitivity accommodates ambient temperature variations and applied power changes. Within 0.3-10 W range, any resistance value at any tolerance is available.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Surface Mount Resistors | Current Sensing Resistors | Chip Resistors | Surface Mount Resistors | Current Sensing Resistors | Chip Resistors | Surface Mount Resistors | Current Sensing Resistors | Chip Resistors

Solid Tantalum Chip Capacitors taget portable electronics.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:32 -0500

Leveraging multi-array packaging assembly technology, MicroTan(TM) 298D Series offers capacitance-voltage ranges from 4.7 µF-4 V to 10 µF-4 V in 1.0 x 0.5 mm 0402 K-case with 0.60 mm maximum profile. Rectangular molded case encapsulation enables high-volume PCB assembly, while L-shaped facedown terminations optimize contact to solder pad. In addition to MP3 players, capacitors are suited for audio filtering and signal processing in mobile phones, digital cameras, and other portable devices.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Tantalum Capacitors | Chip Capacitors | Tantalum Capacitors | Chip Capacitors | Tantalum Capacitors | Chip Capacitors

MOSFETs target LCD TVs and monitors.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:31 -0500

Lead- and halogen-free, N-P Multi-Chip MOSFET Series integrates Power N-channel and P-channel MOSFETs into single device that provides solution for half- or full-bridge inverter designs and comes in DPAK and SOIC-8 packaging. Devices are suited for use in backlights for LCD TVs, LCD monitors, motor drivers, and lamp drivers.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: MOSFET's

Transistors and Diodes suit space-constrained applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:31 -0500

Offered in SOT-723, SOT-963, and SOT-1123 packages measuring 1.0 x 0.6 x 0.37 mm, general purpose and bias resistor transistors are lead- and halogen-free, and suitable for mobile handsets. NSR Schottky Diodes, supplied in SOD-923 package, are available up to 500 mA with reverse blocking voltage to 70 V. Housed in SOD-923 package measuring 1.0 x 0.6 x 0.4 mm, NZ9F Series Zener Diodes feature steady-state power dissipation of 200 mW and full zener breakdown voltage of 2.4-24 V.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Transistors | Zener Diodes | Schottky Diodes | Transistors | Zener Diodes | Schottky Diodes | Transistors | Zener Diodes | Schottky Diodes

Automotive Thin Film Chip Resistor comes in 0603 case size.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:31 -0500

Combining operating temperature of +175°C (max) for 1,000 hr and power rating of 150 mW at +85°C, MCT 0603 AT Beyschlag chip resistor delivers stable performance for automotive electronics. It comes in 0.85 x 1.55 x 0.45 mm RoHS-compliant package, is resistant to humidity, and offers 1,000 V ESD capability. Optimized for harsh environments, product is AEC-Q200-compliant and has CECC approval. Resistance values range from 100 W to 100 kW.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Thin Film Resistors | Chip Resistors | Automotive Resistors | Thin Film Resistors | Chip Resistors | Automotive Resistors | Thin Film Resistors | Chip Resistors | Automotive Resistors

Solid Tantalum Chip Capacitor features 63 V rating.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:31 -0500

Designed to meet derating requirements in +28 V power supplies, TANTAMOUNT® Hi-Rel COTS T97 Capacitor features 22 µF capacitance and dual anode construction to ensure ESR values down to 0.015 W. Conformal-coated unit with wrap-around terminations offers screening options including Weibull grading and surge current testing in accordance with MIL-PRF-55365. Available in 5 case sizes, capacitor operates over temperature range of -55 to +85°C, +125°C with voltage derating.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Tantalum Capacitors | Chip Capacitors | Tantalum Capacitors | Chip Capacitors | Tantalum Capacitors | Chip Capacitors

Step-Down Regulators achieve 93% peak efficiency.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:30 -0500

Housed in 1.6 x 1.6 mm Thin MLF® package, HyperLight Load(TM) Models MIC23030 and MIC23031 have internal MOSFETs that deliver up to 400 mA output current while consuming 21 µA quiescent current. Units feature 2.7-5.5 V input supply range, 3 mV output voltage ripple, and output accuracy of ±2.5% over operating junction temperature of -40 to +125°C. Operating at 8 and 4 MHz, respectively, Models MIC23030 and MIC23031 offer adjustable and fixed output options of 1.0, 1.2, 1.5, and 1.8 V.

This story is related to the following:
Controls and Controllers
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Voltage Regulators | Voltage Regulators | Voltage Regulators

Electrodes are suited for welding and cladding.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Sep 2008 07:35:28 -0500

Offered in .045, 1/16, and 3/32 in. dia, self-shielded electrodes are designed for welding stainless steels and cladding of carbon steels. SelectAlloy 308LTO-3 (E308LTO-3) contains nominal weld metal composition of 21% chromium and 10% nickel with maximum carbon content of .03%, while SelectAlloy 309LTO-3 (E309LTO-3) has nominal weld metal composition of 24% chromium and 13% nickel with maximum carbon content of .03%. Compositions make weld metal resistant to intergranular corrosion.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Welding Equipment and Supplies
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Cladding Products | Welding Electrodes | Stainless Steel Electrodes | Stainless Steel Welding Wire

Bipolar Transistors suit pulsed avionics/radar applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Sep 2008 07:35:22 -0500

Operating over 960-1,215 MHz bandwidth, M/A-COM MAPRST0912-50 is 50 Wpk Class C, silicon bipolar pulse power transistor that has minimum gain of 9.0 dB with 40% minimum collector efficiency on 50 Vdc supply, while M/A-COM MAPRST0912-350 is rated at 350 Wpk with 40 W drive and features minimum gain of 9.4 dB with 45% minimum collector efficiency. With minimum gain of 9 dB with 45% minimum collector efficiency, M/A-COM MAPR-000912-500S00 is rated at 500 Wpk.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Power Transistors | Silicon Transistors | Bipolar Transistors

N-Channel MOSFETs perform synchronous DC-DC conversion.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Sep 2008 07:35:11 -0500

Power MOSFETs TPCM8004, TPCA8030-H, TPCA8031-H, TPC8037-H, and TPC8038-H come in 3 packages from 3.5 x 4.65 x 0.75 mm to 5 x 6 x 1.6 mm and are targeted for use in mobile and desktop computers, servers, and other electronic devices. They convert input voltage to level required for various subsystems. Across series, values include drain-source voltage of 30 V max, drain current of 12 or 24 A max, RDS(ON) of 11.0 or 11.4 mW, and typical low gate resistance of 1 or 3.4 W.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: MOSFET's | DC To DC Converters

LED Driver offers 1 A current sink.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:38 -0500

Available in 5-lead, TO-263 package, Model CAT4101 constant-current, low dropout LED driver is linear-based and does not require an inductor. LED current is set via external resistor connected to RSET pin, which is compatible with voltages up to 25 V, enabling unit to drive strings of up to 10 LEDs, adjustable to 1 A. Device offers high-resolution PWM dimming, instant-on PWM control mode, and thermal shutdown protection in the event of any over-temperature fault condition.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Application Specific Integrated Circuits (ASIC) | Display Drivers

Capacitors meet B level MIL PRF 49470 specifications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:24 -0500

Available in case codes 1, 2, and 6, 500 V rated SMPS capacitors are characterized by low ESR, low ESL, and high current carrying capability. They come in 3 main lead configurations, N (thru hole) and J or L (surface mount), and feature leadframes that allow capacitor to absorb stress and strain. Military applications include I/O filters of high power and high voltage power supplies as well as in bus filters, dc snubber applications for inverters and also high current power supplies.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: High Current Capacitors | Chip Capacitors | High Voltage Capacitors | Military Specification Capacitors

Terminal Blocks suit control loop wiring applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:23 -0500

DAS.4 double level terminal block is designed for space saving panel applications that require feed-through connections, while DSS.4 offers feed-through connection on bottom for 1 side of control loop and knife disconnect on upper level for opening/testing of other side of loop. DSFA.4 and related accessories have option for inserting small plug-in blade type micro fuse or holder that accepts 5 x 20 mm fuse. Units are 6 mm wide and rated to accept up to 10 AWG wire.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Feedthrough Terminals | Terminal Blocks

Socket is designed for use with silicon USB blades.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Sep 2008 07:35:21 -0500

Suited for military and industrial applications, SBS Series SiliconBlade Socket can be used with SiliconDrive II USB Blade. Rugged, lightweight, and vertical unit includes Edge Rate contact system which offers Signal Integrity with high impedance control, reduced broadside coupling, and vibration dampening features. Deep polarizing guide rails add mechanical support and assure proper USB Blade insertion, while polarizing posts ensure proper socket placement.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Printed Circuit Sockets | Universal Serial Bus (USB) Connectors | Integrated Circuit Sockets

Electrodes each measure pH and temperature.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:16 -0500

Featuring refillable epoxy body design, ROSS Ultra Triodes offer precision of 0.01 pH unit, accuracy within 0.03 pH units when using automatic temperature compensation, and fast temperature response within 1Â°C. Units are compatible with samples containing TRIS, proteins, and sulfides. Available in 4 different models depending on which meter customer has, all electrodes have waterproof BNC connectors for pH measurement.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Test and Measuring Instruments

Search for suppliers of: pH Electrodes | Triodes

GaN Power Transistors promote space and power conservation.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:16 -0500

Delivered as discrete die-level devices, TGF2023-xx gallium nitride (GaN) power transistors helps conserve power and space in smaller form factor applications. They operate up to 18 GHz, have 55% power added efficiency (PAE), and produce up to 90 W of output power. Areas of use include high-frequency applications such as mobile base station, defense, and space communications systems.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Power Transistors

HV-HBT Transistors consolidate 3G/4G mobile infrastructure.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:16 -0500

Integrating 2 stages into one package, 28 V HBT (heterojunction bipolar transistor) amplifiers AP631 (4 W) and AP632 (7 W) are suited as pre-drivers and drivers for RF section of base station radio. Linearity minimizes additional signal distortion for repeater applications when used in final amplifier stages and reduces backoff power requirements to minimize distortion from high PAR (peak to average ratio) signals in 3G/4G mobile base stations.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: High Voltage Transistors