ThomasNet Industrial Newsroom -

Servo Drives feature direct 440 Vac input.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Sep 2007 07:43:59 -0600

Performing at ambient operating temperatures up to 55°C, Model ESD-50/CEP delivers 50 A continuous with dc bus voltage of 620 V and maximum output of 100 A, while Model ESD-25/CEP delivers 25 A continuous and 50 A output. They can be used as standalone indexing or positioning controllers in master/slave motion applications, or as part of multi-axis system on SERCOS network. Up to 16 servomotors and I/O can be synchronized using IIS Emerald Series SERCOS master controller.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Compact Servo Drives | Motion Controls | Servo Controls

AC Servo Motors and Amps suit motion control applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 24 Aug 2007 07:44:50 -0600

VersaMotion AC Servo Motors and Amplifiers can be combined with VersaMax Micro for low-end position control applications or used as standalone single-axis position controller for indexing or electronic gear follower applications. Flexibility of command interface and user-defined operating modes translates to variety of system architectures. While power ratings range from 100 W to 3 kW, continuous torque varies from 2.7-169 lb-in. Motor speeds up to 5,000 rpm are available.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Servo Motors | AC Motors | Motion Controllers | Servo Amplifiers

Miniature Servo Drives support up to 2,400 W.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jul 2007 08:04:48 -0600

Integrating Fast and Soft Switching power management technology (FASST), Whistle Servo Drives exhibit power density of 35 W/cm³ and more than 99% efficiency. Models WHI-15/60, WHI-10/100, and WHI-15/100 are rated at 15 A/60 Vdc, 10 A/100 V, and 15 A/100 V, respectively. Featuring pin-based design for integration into application's PCB, drives include embedded SimplIQ digital core, which offers motion control, programming, and communication protocol support.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Compact Servo Drives

Serco Drives are built to survive environmental extremes.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Mar 2007 07:45:58 -0600

Comprised of intelligent digital servo drives and analog servo amplifiers, ExtrIQ series operates over -40 to +70°C range and withstands humidity, unlimited altitude, vibration levels over 15G, and mechanical shock. Products are based on SimplIQ technology, which provides feedback options, programming capabilities, communications protocols, and fully digital motion controller. In operating voltage range of 10-200 V, power densities range from 10 W to 9 kW.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Drives | Servo Amplifiers

Automation Systems integrate Category 3 safe stop.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Mar 2007 07:40:44 -0600

Suited for motion and control functions from 1-9 axes, PMCprimo combines intelligence and drive in one compact unit, enabling users to implement cross cutting, flying saw, or labeling as process is running, without need for extensive programming. PMCtendo DD enables users to operate all common types of motors, from servomotors to asynchronous and linear motors. It can also undertake additional functions such as positioning or speed and torque control.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electronic Components and Devices Sponsored by: Lumera Corporation -
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Servo Drives | Motor Drives | Automation Systems | Servo Amplifiers

Digital Servo Amplifier has onboard Ethernet interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Jan 2007 07:47:28 -0600

Designed for rated output currents up to 24 A, Servostar S700 fits into 300 mm switchgear cabinets and has onboard line filter and shield connections. It also has one slot for safety expansion card, which facilitates operator intervention on machine, even when the motor is switched to On position, with functions such as safely reduced speed and safe operational stop. Other features include 2 more expansion slots, fieldbus connections support, as well as I/O and position-controls.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Digital Servo Amplifiers

Servo Amplifier controls dc brush and brushless motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 20 Jul 2006 08:18:39 -0600

Castanet .76 oz current mode servo amplifier operates from dc power source and features greater than 4 kHz current loop bandwidth. External power supplies support 7.5-96 V operation, and 60 V Castanet furnishes continuous current level to 3.3 A (60 V input) while 100 V model provides 2.5 A. Amplifier delivers 330 W peak and 180 W continuous. Operating as current mode standalone device or integral part of multi-axis motion system, unit can be mounted close to motor or to housing.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Analog Amplifiers | Servo Amplifiers

Panel-Mount Servo Amplifier offers seven operating modes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 05 Jul 2006 08:02:43 -0600

Suited for controlling AC brushless and DC brush motors, XSJ series Micro Xenus amps are compatible with various command signal sources and accept step-and-direction commands. They run on 100 to 240 Vac, 50/60 Hz and come in 3 models that cover 2, 6, and 10 A peak power ranges. Single amp can be used for various stand-alone and network-controlled applications. Series offers several motion control modes and works with feedback from position, velocity, and commutation signal sources.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Amplifiers

Servo and Spindle Hardware promote position accuracy.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 20 Jun 2006 08:05:12 -0600

Modular Level-Up αi series includes spindle amplifiers, servo motors, power supplies with continuous output up to 100 kW, and 1-3 axis servo amplifiers with HRV4 control and minimal heat generation. Servo amps use single fiber optic cable to connect up to 16 servo axes, and all units utilize energy-saving power source regeneration. Servo motors utilize permanent magnet rotor, while motor-mounted, 16 million ppr encoders feature error correction learning functions.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Constant Voltage Power Supplies | Servo Amplifiers | Amplifiers

Dual-Axis Servo Amplifier drives wide range of motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 May 2006 08:01:54 -0600

Designed for torque control of brushless servo motors, Model 800-1514 dual-axis servo amplifier accepts encoder and Hall feedback data. Drive torque is controlled by ±10 V command from motion controller or PLC. It operates on 20-55 V isolated dc supply and delivers independently controlled 4 A peak and 3 A continuous outputs for driving high performance 3-phase motors. Measuring 6.58 x 3.9 x 1.17 in., amplifier provides dual-channel status indicators and protection circuits.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Torque Amplifiers | Brushless Servo Amplifiers

Servo Amplifier powers brush servomotors.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Sep 2005 07:13:24 -0600

Utilizing microprocessor for powering voice coil actuators, Zircon Series Z1 is designed for low-inductance servomotors, and Z2 is designed for mid- and high-inductance servomotors. Both come in 3 power ratings as well as multi- or single-axis configurations. Largest power output is 24 A continuous and 48 A peak, with bus voltage of 160 Vdc or 120 Vac. Potentiometers are replaced with digital switches to facilitate tuning.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Digital Servo Amplifiers

Brushless DC Motor Controller provides 1,000 W of power.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Jul 2005 08:08:05 -0600

Featuring 3.00 x 4.65 x 1.75 in. footprint, Model 371-0028 is suitable for closed or open loop velocity and torque control of BLDC motors producing greater than 160 oz-in. at 7,000 rpm. Input voltage varies from 10â�"50 V with rating of 20 A continuous and 40 A peak for rapid acceleration applications. Unit includes quick disconnect, LED status indication, FWD/REV, and tachometer output. It is protected from over-current, short circuit, over-temperature, and over-voltage.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Amplifiers | Brushless DC Motor Controls

Servo Amp Edge Filter reduces drive cable interference.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Apr 2005 07:48:44 -0600

Model XLS-FA-01 prevents motor power cables from coupling electrical interference into nearby sensitive circuits by reducing steepness of pulse edges. Product is suited for use when interference from motor drive cables could compromise other electrical circuits in system. It works with Xenus PWM servo amplifiers, which operate from 50/60 Hz ac power; permit stand-alone, networked, and indexed operation; and are rated to 7 kW output.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Edge Filters | Servo Amplifiers

Linear Amplifier eliminates cogging and torque ripple.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Apr 2005 07:48:24 -0600

Providing 700 W continuous and 1,400 W peak power, 3-phase servo amplifier, Model TA320 can be configured to accept 2 sinusoidal commutations separated by 120° with 3rd phase generated by amplifier. It can be set to operate in trapezoidal mode using hall sensor feedback or as 1, 2, or 3 single-phase amplifiers. DTS control allows transconductance to be changed on-the-fly. Other features include forced air cooling, SMB coaxial connectors, and pluggable terminal connectors.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Amplifiers | Linear Amplifiers

Linear Servo Amplifiers drive range of inductance loads.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Jan 2005 07:38:12 -0600

Offered in 200 and 400 W configurations, transconductance Series LA eliminates radiated noise and cross over distortion typically found in PWM amplifiers. Onboard high-speed DSP monitors all key system functions in real-time. Intelligent user interface allows setup and storage of all system parameters via serial interface, while non-volatile memory stores parameters during power off conditions. Autobalance feature eliminates need to balance amplifier manually.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Amplifiers | Linear Amplifiers

Servo Amplifiers suit small/medium size brushless motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Jan 2005 08:19:33 -0600

Linear 3-phase Models TA305 and TA310 provide 50 and 200 W continuous power, respectively. Dynamic Transconductance Selection enables on-the-fly changes to torque gain. Trapezoidal output minimizes cogging, and Hall transition-caused overshoots are minimized, providing smooth, sinusoidal-like drive mode. Fault protected from over-current and over-temperature, units operate with 15â�"52 V supply in switch-selectable voltage or current mode.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Linear Amplifiers | Servo Amplifiers

Servo Amplifiers feature integral power supplies.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Nov 2004 07:50:10 -0600

Available in 230 and 460 Vac systems, Series MMC Smart Drives provide 0.5â�"24 kW continuous output power and operate on voltage supply of 100â�"528 Vac, single and 3-phase. Drive configuration is integrated into PiCProâ"¢ for Windows, facilitating application development and maintenance. Amplifiers interface to range of feedback devices including resolver, incremental encoder, and single-turn or multi-turn absolute encoder to address any application need.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Amplifiers | Servo Drives

Servo Motor Amplifiers suit machine automation applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Sep 2004 08:15:33 -0600

Available in 2, 4, and 6-axis packages, Geo PMAC 400 and 600 provide flexibility and power to support linear, brushless, and induction servomotors. Embedded PMAC2 motion controllers can be programmed for any type of motion control application and include PLC programming features for logic control, CNC, gantries, and robotics with kinematics. Products also incorporate Geo servo amplifiers and operate directly from 240 Vac power mains.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Amplifiers

Servo Amplifier works with feedback from resolver sensors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Jul 2004 08:08:31 -0600

Able to drive brush and brushless motors to 7 hp, Xenusâ"¢ provides CANopen multi-axis motion control as well as stand-alone single axis motor drives. It reads feedback from resolver sensors to 14-bit accuracy at 10,000 rpm. Amplifier provides 15 kHz current loop update rate and 3 kHz position and velocity loop update rate. Built-in power supply enables amplifier to run on single or 3-phase 100â�"264 Vac, eliminating need for separate DC power supply.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Amplifiers

Servo Drive features frequency-to-analog voltage converter.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Jul 2004 07:41:53 -0600

Accepting DC input voltages from 20-80 Vdc, unregulated, Model MMP-M815-BR consists of PWM servo amplifier with 8 A continuous output current and 15 A peak for 1 sec. Its E-FOB circuit allows user to employ DC motor with optical encoder in closed-loop velocity servo system. Measuring 5.4 x 1.0 x 3.2 in., unit offers adjustable peak and continuous current limiting, scaleable input command signal, tachometer scaling, and built-in diagnostics.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Servo Drives | Servo Amplifiers