ThomasNet News� -

Bidirectional RF Power Amplifier has transmit sensing circuitry.

info@productnews.com (ThomasNet News�) — Fri, 10 May 2013 08:31:26 -0400

Designed for use with half-duplex RF transceivers running constant-envelope waveforms, NuPower Xtender™ Bidirectional L- and S-Band PA module (model NW-BSSPA-10W-1.0-2.5) provides 10 W peak min RF output power and 40 dB of gain with 30% average power efficiency from 1,000–2,500 MHz. Adjacent radio frequency bands, such as 900 MHz ISM band, are supported at lower peak power levels. Nickel-plated aluminum chassis occupies 3.00 x 2.00 x 1.15 in. and weighs <6 oz.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Power Amplifiers | High Power Amplifiers | RF Amplifiers | Broadband Amplifiers | Power Amplifiers

Surface Mount Line Amplifiers target CATV systems in Asia.

info@productnews.com (ThomasNet News�) — Wed, 27 Mar 2013 08:30:10 -0400

Based on GaAs MESFET process, 24 V Models ACA2460E, ACA2461E, and ACA2462E provide 22, 25, and 28 dB of gain, respectively, providing performance required to design systems up to 1 GHz. MMIC line amplifiers feature low composite triple beat, composite second order, and cross modulation distortion characteristics for optimal performance in fully loaded spectrum. Thermal characteristics of SOIC package platform minimize heat sink requirements.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Surface Mount Amplifiers | RF Amplifiers | Microwave Monolithic Integrated Circuit (MMIC) Amplifiers

Linear GaN Amplifier supports X-band MILSATCOM service.

info@productnews.com (ThomasNet News�) — Tue, 19 Mar 2013 08:30:46 -0400

Housed in 32 lb package measuring 6.8 x 10.5 x 17 in., Model XTSLIN-100X-B1 includes integrated BUC, output isolator, and harmonic filter. High-power unit features 100 W of WGS linear power and draws only 750 W of prime power at linear RF output. Amplifier supports critical multi-carrier X-band operation with extremely low leakage levels in receive band, even for case with SSPA in view of antenna and feed.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Gallium Nitride (GaN) Amplifiers | Satellite Communications (SATCOM) High Power Amplifiers | RF Amplifiers | Linear Amplifiers

Solid-State RF Amplifiers come in 200 W and 400 W models.

info@productnews.com (ThomasNet News�) — Thu, 13 Dec 2012 08:38:33 -0400

Covering 10 kHz to 400 MHz frequency range, Models 200A400 and 400A400 deliver power required for applications using MIL-STD, DO 160, and other automotive standards. Each amplifier utilizes linear devices in all high power stages to minimize distortion and optimize stability. Providing local and remote control of amplifier, Digital Control Panel displays operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Power Amplifiers | RF Amplifiers

Power Amplifier targets Band 8 WCDMA and LTE applications.

info@productnews.com (ThomasNet News�) — Wed, 05 Dec 2012 08:29:35 -0400

Leveraging InGaP-Plus™ technology, Model AWB7129 is optimized for WCDMA, HSPA, and LTE small-cell base stations operating in 925–960 MHz frequency band. Amplifier delivers 15% efficiency with linearity of -47 dBc ACPR at ±10 MHz offset, +24.5 dBm linear output power, and 30 dB gain. Housed in 7 x 7 x 1.3 mm surface mount package with integrated RF matching, amplifier is suitable for picocells, femtocells, and high-performance customer premise equipment.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Power Amplifiers | Power Amplifiers | Telecommunications Integrated Circuits | Integrated Circuits (IC)

GaN Line Amplifier MMIC targets CATV applications.

info@productnews.com (ThomasNet News�) — Tue, 23 Oct 2012 08:39:52 -0400

Delivering +58 dBm output power and 21 dB gain at 1 GHz, Model ACA2428 is optimized for 50–1,000 MHz frequency band applications. Power doubler line amplifier ensures distortion-free video and audio in 1 GHz CATV systems. Available in 16-lead SOIC, device is powered through center tap of output impedance transformer with +24 V supply. Low composite triple beat, composite second order, cross modulation, and noise figure distortion characteristics optimize performance in fully loaded spectrum.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Microwave Monolithic Integrated Circuits (MMIC) | RF Amplifiers

Solid-State Amplifiers cover 0.8-4.2 GHz frequency range.

info@productnews.com (ThomasNet News�) — Thu, 30 Aug 2012 08:30:54 -0400

Offering 525 W and 700 W of RF power, respectively, Models 525S1G4 and 700S1G4 are 24U high and utilize state-of-the-art circuitry to minimize distortion. Each is equipped with Digital Control Panel, which enables both local and remote control of amplifier. Display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include gain control and RF output level protection.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Solid State Amplifiers | RF Amplifiers

WCDMA/LTE Power Amplifiers offer low- and high-power efficiency.

info@productnews.com (ThomasNet News�) — Fri, 29 Jun 2012 08:31:39 -0400

ProEficient(TM) WCDMA/LTE power amplifiers maximize talk time in low-power mode while allowing long-term data application use in high-power mode. Suitable for smartphones and tablet devices, units maximize 4G battery-life without use of DC-DC converter. Depending on model, amplifiers operate over frequency ranges of 880-915 MHz to 1,920-1,980 MHz, and in bands 1, 2, 3/4/9/10, 5, and 8. Products, contained in 3 x 3 mm package, include internal voltage regulation and DC blocks on RF ports.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Power Amplifiers | Miniature Amplifiers | RF Amplifiers

Tunable RF Driver Amplifier (1 W) is optimized for linearity.

info@productnews.com (ThomasNet News�) — Fri, 08 Jun 2012 08:28:10 -0400

Intended for MILCOM and infrastructure applications, MAAM-010617 comes in Pb-free SOT-89 package and is tunable over 30-4,000 MHz range to optimize performance based on end requirements. This 30 dBm GaAs MMIC amplifier, biased with single +5 V supply, has quiescent current of 420 mA and is fabricated using HBT process. Operating bandwidth can be optimized with selective off-chip components. Properties include 13 dB gain, 4.5 dB noise figure and 18 dB return loss for input and output.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Amplifiers

RF Driver Amplifier IC features dynamically adjustable bias.

info@productnews.com (ThomasNet News�) — Wed, 25 Apr 2012 08:34:46 -0400

Operating over temperature range of -40 to +105°C, ½ Watt Model ADL5324 can be biased from 3.3-5 V, enabling RF designer to adjust power consumption to required system performance without need for bias resistor. Device features low power consumption of 62 mA on 3.3 V and up to 133 mA on 5 V. Available in SOT-89 package, amplifier operates over frequency range of 400-4,000 MHz with OIP3 of 43 dBm, P1dB of 29 dBm, gain of 14.6 dB, and low noise figure of 3.8 dB at 2,140 MHz.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Amplifiers | RF Integrated Circuits

RF Wireless Modules target mobile phone applications.

info@productnews.com (ThomasNet News�) — Fri, 02 Dec 2011 08:31:57 -0400

Comprising SAW filter, power amplifier, and magnetic stabilizer in single 6.6 x 3.8 x 1.0 mm package, HFQPRAPCA Series supports Bands 5, 1, 25, and 13. Magnetic stabilizer, providing same function as isolator, enables modules to remain stable by controlling characteristics of load fluctuation caused by changes in impedance that can occur when user's hand, metal object, or other materials come close to antenna.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Chemical Processing and Waste Management

Search for suppliers of: RF Power Amplifiers | Surface Acoustic Wave (SAW) Filters | RF Integrated Circuits | RF Components

RF Power Amplifier covers 10 kHz to 225 MHz frequency range.

info@productnews.com (ThomasNet News�) — Wed, 30 Nov 2011 08:30:43 -0400

Featuring air-cooled, solid-state design, 600 W Model 600A225 is equipped with digital control panel that provides both local and remote control using IEEE, RS-232, USB, and Ethernet interfaces. Panel features 3.75 in. diagonal graphic display, menu-assigned softkeys, and single rotary knob as well as 4 dedicated switches for extensive control and status reporting capabilities. Typical applications include RF susceptibility testing, antenna testing, watt meter calibration, and plasma generation.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Power Amplifiers

L-Band Amplifier features positive slope equalization. .

info@productnews.com (ThomasNet News�) — Tue, 25 Oct 2011 08:27:39 -0400

Designed for Q-Flex 4RU modular chassis, Model QLA 2150 operates over 950-2,150 MHz frequency range and provides variable gain and slope compensation to optimize L-band signal strength through long cable runs and distribution networks. Compact line amplifier operates on +24 V power supply with 75 <font face='Symbol'>W</font> impedance and gain range of 0 to +18 dB in 1 dB steps.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Amplifiers

Power Amplifier suits small-cell base station applications.

info@productnews.com (ThomasNet News�) — Tue, 14 Jun 2011 08:25:33 -0400

Manufactured using InGaP HBT MMIC technology, Model AWB7223 is suited for WCDMA, HSPA, and LTE small-cell base stations operating in 1,930-1,990 MHz frequency band. Unit features output power of +27 dBm with 29 dB gain, linearity of -50 dBc ACPR at ±5 MHz, and power-added efficiency of 15% at rated output power. Housed in 7 x 7 x 1.3 mm surface mount package, power amplifier is optimized for microcells, picocells, and femtocells.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Surface Mount Amplifiers | RF Power Amplifiers | Power Amplifiers | Integrated Circuits (IC)

High Frequency Amplifiers features single-drawer design.

info@productnews.com (ThomasNet News�) — Mon, 28 Mar 2011 08:34:18 -0400

Supporting frequency range of 1.0-18.0 GHz, S/T 20 Series features compact design in single drawer measuring 7 x 19 x 24 in., depending on power level and options. Applications include MIL-STD-461/462, RTCA/D0-160, SAE Specifications, Radiated Susceptibility, Bellcore testing, and broadband communications.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Traveling Wave Tube Amplifiers | Solid State Amplifiers | RF Amplifiers | Microwave Amplifiers | Instrumentation Amplifiers | High Power Amplifiers

Logarithmic/Limiting Amplifier features 75 dB dynamic range.

info@productnews.com (ThomasNet News�) — Thu, 03 Feb 2011 08:31:31 -0400

Model PS13201 Logarithmic/Limiting Amplifier operates in 100-500 MHz frequency range, with 75 dB dynamic range, and also features balanced RF output. Product includes on-chip video amplifier with provision for external adjustment of log slope and offset. Operating over military temperature range of -55 to +125°C, unit is suitable for use in wideband logarithmic receivers and both channelized and mono-pulse radar applications.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Amplifiers | Miniature Amplifiers | Limiting Amplifiers

RF Driver Amplifier covers 250-4,000 MHz frequency range.

info@productnews.com (ThomasNet News�) — Thu, 06 Jan 2011 08:31:07 -0400

Suited for cellular and WiMAX infrastructure applications, MAAM-009560 HBT Driver Amplifier provides linearity of 42 dBm OIP3 over input power range greater than 20 dB, and features typical gain of 15 dB. Unit's lead-free SOT-89 surface mount plastic package is RoHS compliant and compatible with solder reflow temperatures up to 260°C. ESD susceptibility achieves class 2 ESD rating.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Amplifiers | Linear Amplifiers

High-Linearity RF Driver Amplifier covers 250-3,000 MHz range.

info@productnews.com (ThomasNet News�) — Fri, 31 Dec 2010 08:34:07 -0400

With linearity of 47 dBm output IP3 and typical gain of 19.5 dB, MAAM-009563 broadband amplifier uses external matching components, where component values are selected to center 200 MHz instantaneous bandwidth within overall frequency range. Pb-free SOIC-8EP SMT plastic package is RoHS compliant and compatible with solder reflow temperatures to 260°C. Two-stage HBT driver amplifier suits cellular and WiMAX infrastructure applications, and ESD susceptibility achieves class 2 ESD rating.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Integrated Circuits (IC) | RF Amplifiers | Broadband Amplifiers

Variable-Gain Amplifier supports 25 ns digital switching.

info@productnews.com (ThomasNet News�) — Mon, 20 Dec 2010 08:29:57 -0400

Incorporating 9 circuit functions, dual-channel Model MAX2062 can serve as IF or RF VGA, interfacing directly with 50 <font face='Symbol'>W</font> systems operating over 50-1,000 MHz frequency range. Unit provides rapid-fire gain selection for 4 customized attenuation states per path. In typical configuration, cascade yields total gain range of 64 dB, max gain of 19.4 dB, and noise figure of 7.3 dB. Dedicated 8-bit control DACs allow user to adjust analog attenuation in 0.12 dB increments through SPI command.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Digital Amplifiers | Analog Amplifiers | Intermediate Frequency (IF) Amplifiers | Programmable Amplifiers | Variable Gain Amplifiers | RF Amplifiers

RF Power Amplifier Linearizer suits digital UHF TV market.

info@productnews.com (ThomasNet News�) — Mon, 06 Dec 2010 08:36:13 -0400

Supplied in 64-pin, 9 x 9 mm QFN package, SC1887-03 Adaptive RF Power Amplifier Linearizer (RFPAL) SoC is designed for digital terrestrial UHF broadcast TV market. Pre-distortion and linearization solution consumes under 900 mW and operates directly at carrier frequency. Inserted into transmitter designs directly in line with PA, RFin/RFout solution offers standalone operation and promotes optimal performance in reducing out-of-band non-linearities.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: RF Integrated Circuits | RF Power Amplifiers