ThomasNet Industrial Newsroom -

Power Amplifiers target EMC testing applications.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:18 -0500

Available at power levels from 10-500 W, IFI CMC300 Series provides minimum of 300 W of CW power for 10 MHz to 1.0 GHz frequency range. Single-drawer units feature compact design measuring 10.5 in. H (depending on power level and options) x 19 in. W x 25.25 in. D. Amplifiers are suited for high power test requirements for pre-compliance testing, EMC testing, and all lab and test installations.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Mechanical Power Transmission

Search for suppliers of: Microwave Components | Solid State Amplifiers | RF Amplifiers | Microwave Amplifiers | Instrumentation Amplifiers | Amplifiers | High Power Amplifiers | Power Amplifiers | Wideband Amplifiers | Pulse Amplifiers | Moderate Power Amplifiers | Medium Power Amplifiers

Amplifier provides radiated susceptibility testing.

info@productnews.com (ThomasNet News) — Mon, 21 Sep 2009 08:32:53 -0500

Solid-state SMXE-200-2G Series power amplifier provides minimum of 200 W of CW power for frequency range of 10 KHz to 2.0 GHz. Measuring 19 x 10.5 x 27 in. and weighing 60 lb, compact, solid-state power amplifier simplifies EMC and other RF/Microwave testing for low-to-high power test applications. It can also be used for pre-compliance testing, as well as all lab and test requirements.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment
Mechanical Power Transmission

Search for suppliers of: Solid State Amplifiers | RF Amplifiers | Microwave Amplifiers | Instrumentation Amplifiers | High Power Amplifiers | Amplifiers | Wideband Amplifiers | Power Amplifiers | Moderate Power Amplifiers | Medium Power Amplifiers | Pulse Amplifiers

IF Amplifier has dynamic range of 50-1,000 MHz.

info@productnews.com (ThomasNet News) — Tue, 03 Mar 2009 08:29:51 -0500

Suited for receiver and transmitter applications, MAAM-009116 IP3 Intermediate Frequency (IF) Amplifier features 18.0 dB of gain, 22 dBm of output P1dB power, and 40 dBm of output IP3 linearity while maintaining low noise figure of less than 2.4 dB. Housed in industry standard SOT-89 package, single stage device meets demands of complex communications systems.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Intermediate Frequency (IF) Amplifiers

Amplifier is intended for testing applications.

info@productnews.com (ThomasNet News) — Thu, 26 Feb 2009 08:34:36 -0500

Designed specifically for bellcore testing, Model T101-100-50 single drawer amplifier measures 17.5 x 19 x 27 in. Compact, lightweight amplifier unit provides minimum of 100 W up to 4.0 GHz and 50 W to 10 GHz with better than -20 dBc harmonic levels.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment
Mechanical Power Transmission

Search for suppliers of: RF Amplifiers | Microwave Amplifiers | Instrumentation Amplifiers | High Power Amplifiers | Amplifiers | Pulse Amplifiers

IF Amplifier is digitally programmable.

info@productnews.com (ThomasNet News) — Thu, 08 Jan 2009 08:38:55 -0500

Featuring 48 dBm OIP3 (output 3rd order intercept) at 200 MHz, LT5554 enables high dynamic range performance in ADC systems. It settles in less than 5 ns from gain change, while gain is digitally controlled from 2-18 dB by 7-bit parallel word, producing 0.125 dB steps gain control granularity. Powered from single 5 V supply, unit draws nominal supply current of 200 mA, has gain accuracy of ±0.1 dB from -40 to 85°C, and comes in 32-lead, 5 x 5 mm QFN surface mount package.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Variable Gain Amplifiers | Broadband Amplifiers | Digital Amplifiers | Intermediate Frequency (IF) Amplifiers | Low Noise Amplifiers | Programmable Amplifiers

Modular Test Station tests traveling wave tubes.

info@productnews.com (ThomasNet News) — Mon, 11 Aug 2008 07:46:09 -0500

Consisting of 19 in. rack with pre-installed distribution and control modules, Model PTT4100 tests low and medium power pulse/continuous wave TWTs used in communications and EW systems. Modular design allows user to configure system to exact requirements, and each self-contained module offers monitoring and display functions, BIT, and protection features. Anode, cathode, collector, focus electrode, and grid modules can be supplied according to customer requirements.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Communications Testers | Traveling Wave Tubes

Power Amplifier features 6-18 GHz frequency range.

info@productnews.com (ThomasNet News) — Wed, 06 Aug 2008 08:07:44 -0500

Designed for defense electronics and homeland security industries, CHPA0618-1 ultra-broadband power amplifier incorporates GaAs MMIC technology into Spatium(TM) broadband spatial combining architecture. Unit has multiple element architecture that provides protection from single point failures and enables dispersive, 3D heat dissipation. Featuring 40 W typical saturated power, it includes soft-fail in event of device failure, with no warm-up or turn-on delay.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Microwave Monolithic Integrated Circuit (MMIC) Amplifiers | Broadband Amplifiers | Power Amplifiers

Broadband Amplifier covers 100 MHz to 6 GHz frequency range.

info@productnews.com (ThomasNet News) — Mon, 04 Aug 2008 07:52:02 -0500

Housed in 1.25 x 1.25 x 0.59 in. aluminum enclosure with 3 SMA connectors, Model CRBAMP-100-6000 RedBox is low-noise general purpose connectorized amplifier featuring signal gain of 18 dB with output power of 17 dBm (P1dB). It also features typical noise figure of 3.5 dB with IP3 of +30 dBm. Suited for IF or RF buffer amplifiers, base stations, high-reliability applications, and general lab use, unit operates from single +5 V supply consuming only 60 mA.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: RF Amplifiers | Low Noise Amplifiers | Intermediate Frequency (IF) Amplifiers | Broadband Amplifiers

MMIC Amplifiers deliver 5 W and 25 W CW RF output power.

info@productnews.com (ThomasNet News) — Thu, 26 Jun 2008 07:36:18 -0500

Integrating GaN RF transistor technology, 5 W distributed amplifier, Model CMPA0060005 operates from DC to 6 GHz, while 25 W reactively matched Model CMPA2560025 operates from 2.5-6 GHz. Both MMICs are suitable for variety of applications where high power over broad bandwidths is required. Pair of CMPA2560025s, driven by CMPA0060005 can provide over 40 dB gain with output power up to 50 W in 2.5-6 GHz band.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Microwave Monolithic Integrated Circuits (MMIC) | Microwave Monolithic Integrated Circuit (MMIC) Amplifiers

Solid State Ruggedized Amplifier features noise quieting.

info@productnews.com (ThomasNet News) — Thu, 05 Jun 2008 07:36:21 -0500

Measuring 5.25 in. high and weighing less than 45 lb, SMIV ruggedized Solid State Amplifiers incorporate the latest in solid state technology. This unit operates from 400-1,000 MHz as standard at 200 W. Other frequency ranges and power levels are available, and these devices are designed for fixed and mobile applications.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: High Power Amplifiers | Microwave Amplifiers | Power Amplifiers | RF Amplifiers | RF Power Amplifiers | Solid State Amplifiers | Traveling Wave Tube Amplifiers

HBT Amplifier targets WLAN and WiMAX applications.

info@productnews.com (ThomasNet News) — Fri, 25 Apr 2008 07:52:49 -0500

Featuring 4.9-5.9 GHz operating range, 2 W Model SZP-5026Z is optimized for use as either final or driver stage in WiMAX equipment. Single-stage, Class AB, InGaP Heterojunction Bipolar Transistor amplifier delivers error vector magnitude performance of 2.5% at 25.5 dBm output power. Operating from 3-5 V supply, device includes internally pre-matched input and output, integrated input power detector, and 1,000 V Class 1C ESD protection.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Microwave Amplifiers | Wireless Amplifiers | Bipolar Amplifiers

Integrated Front End is optimized for Zigbee® modules.

info@productnews.com (ThomasNet News) — Thu, 04 Oct 2007 07:58:33 -0500

Model RIF211 provides complete front end capability with power amplifier, low-noise amplifier, and antenna switch. It features power amplifier with current draw of 120 mA while transmitting at 20 dBm output. MMIC includes high gain very low noise LNA (LNA Gain = 15 dB, NF less than 1.0 dB), as well biasing circuitry in miniature 16-pin 3 x 3 x 0.5 mm QFN package. Module is fully matched internally to a 50 ohm output and input impedance.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Integrated Circuits (IC) | Power Amplifiers | Low Noise Amplifiers | Microwave Monolithic Integrated Circuit (MMIC) Amplifiers

Millimeter-Wave Amps provide broadband performance.

info@productnews.com (ThomasNet News) — Tue, 31 Jul 2007 07:44:59 -0500

Available in 10 models covering 33-75 GHz bandwidths, LA Series features P1dB input powers as high as +11 dBm, noise figures as low as 7 dB, and gain options from 10-40 dB. Additional performance characteristics include input/output VSWR of 2.2:1 and gain flatness of ±3.0 dB. Suited for EW, ECM, and instrumentation applications, amps offer full range of packaging configurations and RF interface options, including 2.4 and 1.85 mm coaxial configurations.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Broadband Amplifiers

TWT Amplifiers suit high output power applications.

info@productnews.com (ThomasNet News) — Wed, 06 Dec 2006 08:07:26 -0500

Providing RF power to test and measurement, industrial and university research and development, and service applications, Models 125T18G26 and 125T26G40 deliver 125 W CW power in frequency ranges of 18-26.5 GHz and 26.5-40 GHz respectively. Both TWTs include built-in IEEE-4888 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, monitoring of TWT helix current, cathode voltage, baseplate temperature, and cabinet temperature.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: RF Amplifiers | Microwave Amplifiers | Traveling Wave Tube Amplifiers

Ultra-Low Noise Amplifiers cover microwave frequency bands.

info@productnews.com (ThomasNet News) — Mon, 27 Nov 2006 07:46:48 -0500

Offered in 20+ models, ultra-low noise JCA Amplifiers can be employed in narrowband situations, such as GPS receiver, or in electronic surveillance system where several octaves of bandwidth may be necessary. Narrowband models can be optimized for sub 0.5 dB noise figures over 100-200 MHz sub-bands, and broadband multi-octave noise figure performance is rated under 1 dB max for C-Band frequencies and below. Design minimizes touch-and-tune time.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Wideband Amplifiers | Narrow Band Amplifiers | Low Noise Amplifiers | Microwave Amplifiers

Power Amplifier suits 802.16 WiMAX Base Station applications.

info@productnews.com (ThomasNet News) — Wed, 18 Oct 2006 07:50:18 -0500

Model ZPA3436-5W amplifier operates over 3.4-3.6 GHz band with typical gain of 46 dB and 37 dBm OFDM output power for 64 QAM, 3/4 Coding, 3.5 MHz channel bandwidth, and 256 carriers. Biased at 28 V, high linearity power amplifier achieves EVM performance of 2% at 37 dBm linear output power, and draws 3.5 A dc current. Design is lead free and SMA connectorized package measures 9 x 4 x 1.5 in. without external heat sink.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: High Power Amplifiers

TWT Amplifier operates in 4.2-18 GHz frequency band.

info@productnews.com (ThomasNet News) — Fri, 13 Oct 2006 07:39:22 -0500

Delivering 40 W of power, Model 40T4G18 Traveling Wave Tube Amplifier (TWT) is designed for applications where low harmonic content is required in sub-band ranges and where wide instantaneous bandwidth, high gain, and moderate power output are required. Features include built-in IEEE-4888 (GPIB) interface, 0 dBm input, VSWR protection, gain control, RF output sample port, auto sleep, plus monitoring of TWT helix current.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Power Amplifiers | RF Amplifiers | Traveling Wave Tube Amplifiers

Power Amplifiers are designed for 0.8-18 GHz frequency range.

info@productnews.com (ThomasNet News) — Fri, 06 Oct 2006 07:46:10 -0500

Hybrid traveling wave tube (TWT) amplifier Model 35ST1G18 delivers 35 W minimum at amplifier output connector with low harmonics, while Model 50ST1G18 provides 50 W minimum. Both solid state amplifiers are are 100% VSWR tolerant include built-in IEEE-4888 interface, 0 dBm input, gain control, RF output sample port, plus monitoring of TWT helix current, cathode voltage, collector voltage, heater current, heater voltage, baseplate temperature, and cabinet temperature.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: High Power Amplifiers | Hybrid Amplifiers | RF Power Amplifiers | Traveling Wave Tube Amplifiers | Broadband Amplifiers | Microwave Amplifiers

Wideband Amplifiers are designed for microwave applications.

info@productnews.com (ThomasNet News) — Mon, 21 Aug 2006 07:51:10 -0500

Providing alternative to distributed amplifiers for applications requiring frequencies extending through X and Ku bands, SUF series E-Mode pHEMT wideband amplifiers operate directly off single +3.3 or +5.0 V supply voltage, and employ 50 <font face='Symbol'>W</font> broadband match. MMIC Darlington amplifiers include 5 models, SUF-1000 to SUF 5000, offering from DC-20 GHz to 0.10-10 GHz and 10-19 dB of gain.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Microwave Monolithic Integrated Circuit (MMIC) Amplifiers | Wideband Amplifiers

TWTAs suit microwave testing applications.

info@productnews.com (ThomasNet News) — Thu, 03 Aug 2006 08:32:25 -0500

Custom Traveling Wave Tube Amplifiers (TWTAs) fit in standard 19 in. rack and deliver up to 1,000 W power. Amplifier line includes Model 511, which delivers 1,000 W/2.5-7.5 GHz, Model 512 with 500 W/7.5-18 GHz, and Model 513 with 1,000 W/1-2.5 GHz.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Traveling Wave Tube Amplifiers