ThomasNet Industrial Newsroom -

DisplayPort-Based IC cleans and amplifies video signals.

info@productnews.com (ThomasNet News) — Mon, 26 Oct 2009 08:54:00 -0500

Offering signal quality enhancements when transmitting display signals over extended distances and inefficient board layouts, PanelPort(TM) LinkXtend(TM) provides unlimited cable extension for PCs and mobile computers to connect to monitors and projectors. DisplayPort(TM)-based single-chip device amplifies and re-drives signals while also cleaning, reconditioning, and renewing signal integrity. It also provides full link layer repeat functionality while extending DisplayPort signal capability.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Video Distribution Amplifiers | Video Amplifiers | Video Transmitters

Distribution Amplifier works as VGA video splitter.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:31 -0500

Providing 1 VGA input and 16 VGA outputs, Model AT-VGA116 is capable of splitting any signal from 1 VGA source to 16 separate displays with compatible VGA inputs simultaneously. Device allows cascading of up to 24 units to meet any AV application. With max bandwidth of 1 GHz, splitter will support highly defined video in multiple resolutions up to 2,048 x 2,048. Applications include store video displays, education and worship facilities, and digital signage.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Distribution Amplifiers | Video Splitters

Power Amplifiers target EMC testing applications.

info@productnews.com (ThomasNet News) — Tue, 13 Oct 2009 08:32:18 -0500

Available at power levels from 10-500 W, IFI CMC300 Series provides minimum of 300 W of CW power for 10 MHz to 1.0 GHz frequency range. Single-drawer units feature compact design measuring 10.5 in. H (depending on power level and options) x 19 in. W x 25.25 in. D. Amplifiers are suited for high power test requirements for pre-compliance testing, EMC testing, and all lab and test installations.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices
Mechanical Power Transmission

Search for suppliers of: Microwave Components | Solid State Amplifiers | RF Amplifiers | Microwave Amplifiers | Instrumentation Amplifiers | Amplifiers | High Power Amplifiers | Power Amplifiers | Wideband Amplifiers | Pulse Amplifiers | Moderate Power Amplifiers | Medium Power Amplifiers

Amplifier provides radiated susceptibility testing.

info@productnews.com (ThomasNet News) — Mon, 21 Sep 2009 08:32:53 -0500

Solid-state SMXE-200-2G Series power amplifier provides minimum of 200 W of CW power for frequency range of 10 KHz to 2.0 GHz. Measuring 19 x 10.5 x 27 in. and weighing 60 lb, compact, solid-state power amplifier simplifies EMC and other RF/Microwave testing for low-to-high power test applications. It can also be used for pre-compliance testing, as well as all lab and test requirements.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment
Mechanical Power Transmission

Search for suppliers of: Solid State Amplifiers | RF Amplifiers | Microwave Amplifiers | Instrumentation Amplifiers | High Power Amplifiers | Amplifiers | Wideband Amplifiers | Power Amplifiers | Moderate Power Amplifiers | Medium Power Amplifiers | Pulse Amplifiers

HD/SDI Distribution Amplifiers suit broadcast applications.

info@productnews.com (ThomasNet News) — Thu, 09 Jul 2009 08:34:05 -0500

Available with support for SDI and HD-SDI standards, 1 x 4 splitter AT-SDI-14, 1 x 4 splitter with re-clocking AT-SD-14RC, 1 x 6 splitter AT-SDI-16, and 1 x 6 splitter with re-clocking AT-SDI-16RC take single input and distribute signal perfectly to 4 or 6 identical outputs. Re-Clocking technology helps buffer and cascade long distance transmissions to send signal over 1,000 ft with resolutions up to 1,080p and full bandwidth up to 1.48 Gbps. Models also support audio.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Electronic Splitters | Distribution Amplifiers

Instrumentation Amplifier targets DAQ applications.

info@productnews.com (ThomasNet News) — Thu, 25 Jun 2009 08:28:44 -0500

Compatible with all 12, 16, or 24-bit A/D devices, USB-controlled, single-channel Model USBPGF-S1(TM) consists of programmable signal conditioning instrumentation amplifier and low pass filter. Users can mix and match filter characteristics and independently select and program AC or DC coupling, corner frequency, and gain steps up to x1000 in single-ended or differential measurements. Each can be configured as 8-pole Butterworth, Bessel, elliptic, or linear phase filter.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Low-Pass Filters | Instrumentation Amplifiers | Signal Conditioners

Universal Amplifier has up to 96 kHz/channel sampling rate.

info@productnews.com (ThomasNet News) — Mon, 08 Jun 2009 08:30:30 -0500

Supporting Advanced Plug and Measure technology that allows applicable transducers to be automatically recognized by amplifier, MX410 has 4 individually configurable inputs, each electrically isolated and each with analog output. Digitalization is implemented with 24 bit resolution. Module is suitable for SG transducers in half or full bridge circuits, inductive half or full bridges, current-fed piezoelectric sensors (IEPE), and analog voltage signals (±10 V).

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Bridge Amplifiers | Transducer Amplifiers | Multichannel Amplifiers

Frequency Amplifier can acquire up to 4 frequency signals.

info@productnews.com (ThomasNet News) — Mon, 08 Jun 2009 08:30:30 -0500

With sampling rates of up to 96,000 signals/sec and bandwidths of up to 38 kHz, MX460 can acquire torque from HBM torque transducers, PWM signals, and speeds. It measures digital signals with precision of up to 1 MHz, while all input channels are electrically isolated and can be individually configured. Device supports integrated Transducer Electronic Data Sheet (TEDS) technology and features Ethernet and Firewire interfaces for data transmission.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Frequency Amplifiers | Multichannel Amplifiers | Transducer Amplifiers

Instrumentation Amp enables power efficient medical devices.

info@productnews.com (ThomasNet News) — Mon, 11 May 2009 08:32:00 -0500

Measuring 1.6 x 2.0 mm, AD8235 instrument amplifier draws 40 mA and operates on 1.8-5.5 V power supplies, with common-mode input-voltage range of 4 and 1.4 V on 5 and 1.8 V supplies, respectively. Common-mode rejection ratio of 86 dB eliminates common-mode interference. Also, unit features 6 nA shutdown current and 40 pA bias current. Low power consumption makes device suitable for use in home ECG monitors, infusion pumps, and activity-monitoring medical devices.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Instrumentation Amplifiers

Strain Gage Amplifiers survive heat, shock, and vibration.

info@productnews.com (ThomasNet News) — Tue, 14 Apr 2009 08:30:53 -0500

Measuring 18 x 9.7 x 4.4 mm, Miniature Strain Gage Amplifiers accept 8-36 Vdc power while providing 5 V bridge excitation and 0.1-4.9 V output. Users can program gain, offset, and temperature compensation from personal computer. Programming is done through power and signal leads, eliminating need for additional wiring. Rated from -40 to +125°C, amplifiers are suited for automotive, transportation, aerospace, robotic, and bio-med industries.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Strain Gage Amplifiers | Programmable Amplifiers | Miniature Amplifiers

Amplifier is intended for testing applications.

info@productnews.com (ThomasNet News) — Thu, 26 Feb 2009 08:34:36 -0500

Designed specifically for bellcore testing, Model T101-100-50 single drawer amplifier measures 17.5 x 19 x 27 in. Compact, lightweight amplifier unit provides minimum of 100 W up to 4.0 GHz and 50 W to 10 GHz with better than -20 dBc harmonic levels.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment
Mechanical Power Transmission

Search for suppliers of: RF Amplifiers | Microwave Amplifiers | Instrumentation Amplifiers | High Power Amplifiers | Amplifiers | Pulse Amplifiers

Transimpedance Amps have multi-channel architecture.

info@productnews.com (ThomasNet News) — Thu, 12 Feb 2009 08:29:15 -0500

Programmable gain transimpedance amplifiers, MTI04E and MTI08, feature circuits designed for processing signals from sensors with multiple current outputs. Sensitivity and dynamic range enable use with photodiodes in array or row sensors that operate in low-light environments or those with extreme intensity/color changes. While MTI04E integrates 3 functional channels for processing signals from tri-color sensors, MTI08 provides 8 programmable channels.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Transducer Amplifiers

Video Distribution Splitter/Amplifier supports HDMI 1.3.

info@productnews.com (ThomasNet News) — Thu, 05 Feb 2009 08:45:31 -0500

Model AT-HD-V12 can split any HDMI source into 2 outputs without signal loss. It allows digital video source with HDMI output, such as DVD, satellite, cable box, PC, Xbox, and PS3, to connect to 2 simultaneuous HD displays. Featuring single-link bandwidth of 349 MHz, device supports Dolby TrueHD (5.1/7.1/10.1 Ch) audio. Product suits in store video displays, education, and worship facility applications.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Video Distribution Amplifiers

HDMI Amplifier/Splitter routes one source to 8 displays.

info@productnews.com (ThomasNet News) — Fri, 23 Jan 2009 08:33:51 -0500

Without incurring signal loss, AT-HD-V18 allows any digital video source with HDMI output to connect with up to 8 HD displays simultaneously. HDMI 1.3 support results in single-link bandwidth of 349 MHz, enabling support for Dolby TrueHD (5.1/7.1/10.1 Ch) audio optimal display resolution and color depth. Also, HDMI 1.3 is fully backwards-compatible with previous HDMI versions and incorporates automatic audio syncing capability.

This story is related to the following:
Electronic Components and Devices
Communication Systems and Equipment

Search for suppliers of: Video Splitters | Video Distribution Amplifiers

Zero-Drift Instrumentation Amp is optimized for low power.

info@productnews.com (ThomasNet News) — Fri, 25 Jul 2008 07:42:42 -0500

Promoting accuracy and battery life in low-power applications, INA333 features 75 µA quiescent current and operates on power supplies as low as 1.8 V. Offset voltage of 25 µV and offset drift of 0.1 µV/C promote accuracy and long-term stability. Supplied in MSOP-8 package, solution has 3 op amp architecture and input bias current of 200 pA. Zero-drift technology incorporates switched-capacitor notch filter to eliminate chopping noise and provide input voltage noise of 50 nV/rt-Hz.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Instrumentation Amplifiers

Amplifier suits strain gages and strain gage transducers.

info@productnews.com (ThomasNet News) — Wed, 28 May 2008 07:47:50 -0500

Fully isolated and EMC-compliant, DR7DC is designed to avoid potential ground loop noise problems. It offers shunt calibration with remote operation and provides acceptable solution when integrating industrial load cells and pressure sensors into control system. Operating from 9-36 Vdc, DIN rail-mount product can be configured for 0-10 V, +10 V, or 4-20 mA outputs from 4 mV to 10 V input signals. Transducer excitation is adjustable from 3-10 Vdc, and non-linearity is 0.02% FS.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Strain Gage Amplifiers

Distribution Amplifier delivers full HD output to 4 displays.

info@productnews.com (ThomasNet News) — Fri, 18 Apr 2008 07:55:26 -0500

Designed for home theaters and public HD display kiosks, 3x4 HDMI V1.3 Switch and Splitter Distribution Amplifier distributes full 1080p video streams to 4 HD displays simultaneously via HDMI. RS-232 serial port provides integration with 3rd party control systems, while 3x1 HDMI switching allows up to 3 separate HD sources to be selected. Unit processes HDMI data and outputs audio via Toslink Audio while leaving HDMI signals (both audio/video) available to both HDMI outputs.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Distribution Amplifiers

Instrumentation Amplifiers come in 3 x 5 mm MAX package.

info@productnews.com (ThomasNet News) — Mon, 28 Jan 2008 07:34:08 -0500

Using spread-spectrum autozeroing technique, Models MAX4208/MAX4209H instrumentation amplifiers achieve maximum VOS of 20, 30, and 40 µV at +25, +85, and +125°C, respectively. Indirect current-feedback architecture offers true ground sensing and input common-mode voltage range of -0.1 to 1.3 V. With CMRR of 106 dB (min), units feature 2-transconductance-amplifier architecture, CMOS transistors with 1 pA (typ) input bias current, and 40-125°C temperature range.

This story is related to the following:
Electronic Components and Devices

Search for suppliers of: Current & Voltage Amplifiers | Instrumentation Amplifiers

HDMI Distribution Amplifier targets electronic retailing.

info@productnews.com (ThomasNet News) — Wed, 16 Jan 2008 07:34:58 -0500

With Pro HD 3x8 HDMI Distribution Amplifier, users can deliver full 1,080P HD video and audio streams to 8 HD displays simultaneously. Unit is fully scalable and distributes HDMI to more than 8 HD displays by cascading multiple units. Integrated 3x1 HDMI switching allow up to 3 separate HD sources to be selected. Configurable to fit in 1 RU rack or as tabletop installation, unit includes RS-232 serial port for integration with 3rd party control systems.

This story is related to the following:
Communication Systems and Equipment
Electronic Components and Devices

Search for suppliers of: Distribution Amplifiers | Video Distribution Amplifiers

PXI Instrumentation Amplifier has DC-50 MHz bandwidth range .

info@productnews.com (ThomasNet News) — Thu, 06 Dec 2007 07:44:48 -0500

Designed to expand measurement range of PXI digitizers and analog inputs, Model 4040A 50 MHz PXI Instrumentation Amplifier offers 100 V differential common mode inputs with 70 dB of CMRR. It comes with VISA compliant drivers for LabVIEW8, Microsoft C++, and Visual Basic. Interactive front panel VI provides manual control of all of board's features. Unit features ac/dc coupling, 1 MO and 50 O input impedance, 50 O output, and programmable offset and attenuation/gain.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices

Search for suppliers of: PCI Communication Boards | Instrumentation Amplifiers