ThomasNet Industrial Newsroom -

Module facilitates oil and gas recovery from subsea fields.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Feb 2008 07:51:22 -0500

Integrating functionality and instrumentation directly into existing subsea control system, PodEx(TM) optimizes production at brownfield developments, as well as environmental safety. Module utilizes spare subsea electrical circuitry or co-existent power supplies to convey well and reservoir data to topside data acquisition systems for analysis. Scalable unit offers transparent communication layer, which is adaptable to any subsea application.

This story is related to the following:
Chemical Processing and Waste Management
Test and Measuring Instruments

Search for suppliers of: Oil Recovery Systems | Data Acquisition Systems

Oil Cleaning System operates in hazardous locations.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 May 2007 08:46:54 -0500

Kleentek electrostatic oil cleaning system features purge system where filtered compressed air or nitrogen is used to pressurize enclosure, preventing explosive gasses, vapors, or dusts from entering equipment. System uses electrostatic forces to remove contaminants from oil that cause tar, varnish, or sludge. Suited for refinery, natural gas, chemical, and petrochemical applications, it does not require operator supervision and runs 24/7.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Oil Purification & Reclamation Systems | Oil Contaminants Separators | Electrostatic Separators

Purification System improves properties of insulation oil.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 19 Apr 2006 08:59:38 -0500

Utilizing coacervation, coalescing, separating, and refined purification technologies, Model VFD can remove trace water, gas, and particulate from insulating oil to boost performance of transformers, circuit breakers, mutual inductors, cable, and capacitors. ROOT vacuum system in second stage of separating system optimizes effect of purification. System can also be used for treating low viscosity lubrication oil.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Oil Purification & Reclamation Systems

Oil Recycling System helps extend life of lubricants.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Apr 2006 08:06:24 -0500

Employing filter media that removes water, gas, particulate, and impurities, LV series is suited for purifying and restoring hydraulic, machine, coolant, and various other lubrication oils. Automatic reverse wash system helps extend filter lifetime and performance, while security system includes pressure protection device and automatic temperature controller for safe operation. System is offered in mobile or stationary options.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Oil Recovery & Recycling Process Systems

Benchtop Centrifuge removes bubbles from assembly fluids.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 28 Mar 2006 07:04:31 -0500

Used with prepackaged or user-loaded syringes, ProcessMate(TM) 5000 purges medium- to high-viscosity fluids like epoxies, greases, and silicones of bubbles and air pockets that can affect shot-to-shot consistency in pneumatic dispensing processes. Unit purges up to four 3, 5, 10, or 30 cc syringes at a time. Centrifuge includes on-off switch, timer, tachometer, locking lid, and electric brake that quickly stops rotor before lid is opened.

This story is related to the following:
Laboratory and Research Supplies and Equipment
Chemical Processing and Waste Management

Search for suppliers of: Centrifuges | Oil Centrifuges

Pressurized Oil Drain facilitates vehicle fluid handling.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 02 Feb 2006 05:09:39 -0500

Made of heavy-gauge steel, Model 3614 features 18 in. offset bowl that lets technician catch fluid without repositioning tank. Telescopic bowl adjustment range of 44-72 in. meets varying vehicle requirements, and valve setup allows evacuation with bowl set at any height. With 20 gal capacity, unit averages 15-20 vehicles before tank evacuation is required. Fixed air regulator allows use of standard shop air for operation.

This story is related to the following:
Chemical Processing and Waste Management
Mechanical Components and Assemblies
Material Handling and Storage
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Oil Tanks | Drains | Oil Recovery Equipment

Oil Cleaning System features NEMA 4 rating.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Mar 2005 07:33:28 -0500

Suited for extreme outdoor environments, Model N100 works electrostatically to purge oil of contaminants while eliminating need for mechanical filters. It draws oil from main reservoir and circulates it at very low velocity, removing submicron particles as well as large contaminants from hydraulic fluids and lubricating oils. Operating on 115 V from central control board, unit features filtering volume of 10,100 gal and flow rate of 5.5 gpm.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Oil Purification & Reclamation Systems | Electrostatic Separators

Oil Skimming Belt has textured surface to facilitate clean-up.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Jul 2004 07:43:07 -0500

Incorporating embedded metal filaments in belt to protect against static electricity build-up, Light Fuel Oil (LFO) Polymer Fuzzy Belt withstands exposure to harsh chemicals and solvents. Surface design, with thousands of fibers per square inch protruding from belt, increases effective surface area for gasoline and non-viscous oil removal. This results in removal rates for fuel oil in gallons per hour range.

This story is related to the following:
Chemical Processing and Waste Management
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Waste Handling Equipment

Search for suppliers of: Belts | Pollution Control Equipment | Oil Skimmers

Centrifuge System reclaims oil after chip spinning.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Oct 2002 07:38:52 -0500

Turbo-Separator T10-2-16, featuring bowl rotational speeds of 3,000 rpm, can remove solids down to 2 micron at flow rates up to 26 gpm. It includes removable, self-draining plastic liner for sludge removal. Unit can reclaim up to 95% of captured fluid, and can be used to replace less efficient centrifuges or paper bed filters that become plugged with oil and solids. Turbo-Separator measures 28 x 20 x 34 in. and can be installed in tight spaces.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Oil Centrifuges

Oil Skimmer is corrosion-resistant.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Nov 2001 16:20:27 -0500

MAXI-Skimmer(TM) Model VSSP/4 belt skimmer is capable of lifting floating oil at variable rates from 1 to 20 gph. Stainless steel or polyurethane belts can reach down from 1 to 50 ft below skimmer. Construction includes stainless steel frame sides, top and wetted parts. Drive pulley bodies are glass-filled nylon, and scraper blade and frame ends are bearing grade UHMW polymer. Input voltage is 115/1/60 which is transformed to drive its 12 Vdc gearmotor.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Oil Recovery Systems | Oil Skimmers

System recovers oil after chip deoiling.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Oct 2001 07:43:45 -0500

Centrifuge Recovery System cuts oils utilizing centrifugal technology. Depending upon metallurgy and viscosity of oil, solids can be removed to 2-5 micron with processing rates over 100 gallons per hour. Systems can be designed with ability to process water-soluble oils, synthetic coolants as well as cutting oils. Designs with virtually no fluid hold-up volume make it easy to move units to various locations throughout plant.

This story is related to the following:
Chemical Processing and Waste Management
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Oil Recovery Systems | Oil Reclaiming Machinery