ThomasNet Industrial Newsroom -

Conduit and Connectors are halogen-free and flame-resistant.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Sep 2008 07:43:00 -0600

Comprised of nylon conduit, connectors, and accessories, Corrlok® System suits passenger rail vehicle wiring, industrial control equipment, robots, and machine tool applications. Available in CL, CLR, CLL and CLFR conduits, Corrlok is lightweight, liquidtight, and withstands tough environments. One-piece connectors come in straight and angled, flanged, and threaded models. Mounting brackets, reducers, and specialty connectors including metric and PG threads are also available.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electrical Flexible Halogen-Free Conduits | Liquid-Tight Conduits | Conduit Connectors

Entry Plate speeds cable and pneumatic hose installation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 15 Sep 2008 07:40:58 -0600

Designed to snap into panels 1.5-2 mm thick and rated for use between -30 to +90°C, Round KDP/R Cable Entry Plate comes pre-punched with 1 hole for each cable or pneumatic hose to be inserted. Once cable is fed through, slight tug in opposite direction sets strain relief for cable. If cable is removed at later time, hole can be completely sealed off using strain relief indicator. Unit meets both RoHS standards and UL class VO for fire protection.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Cable Fittings | Hose Fittings | Machinery Installation Systems

Conduit Couplings feature watertight design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:08 -0600

Available in ½-4 in. sizes, Raintight 3-piece, self-aligning conduit couplings join 2 lengths of threaded rigid or IMC conduit. Units feature malleable iron construction and zinc electroplating, with mating components to which threaded conduits are securely joined in telescoping fashion. Oversized O-ring prevents water entry and self-aligning feature on UL-listed couplings allows smooth wire pulling from conduit to conduit.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Conduit Connectors

Connector secures square locked flexible metal conduit.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Jun 2008 07:36:08 -0600

UL recognized for use within listed assemblies, USL-120 is provided with set screw that secures conduit without damaging conductors. Flexible Steel Conduit Connector can be used with assemblies including office partitions, showcases, merchandising displays, lighting fixtures, range tops, and other appliances.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Conduit Connectors | Flexible Connectors

Edge Clip Tie Holder attaches cable bundles to boards.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:33 -0600

Model FTH-31 features clip that accepts many different size ties and allows ties to be mounted in 2 directions. Plastic housing with assembled metal clip provides strong retention to panel, and holder accepts panels from 0.03-0.12 in. RoHS-compliant product is available in V2 Nylon 6/6, UL94 V0 Nylon 6/6, and High-Temperature Nylon 4/6.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices Sponsored by: Lumera Corporation -
Material Handling and Storage Sponsored by: Asymtek - Newsletter Ad

Search for suppliers of: Conduit Cable Clips | Cable Holders

Flexible Conduit Fittings eliminate need for bending machines.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 May 2008 07:40:05 -0600

Flexel(TM) EMT Flexible Fittings come in 1¼ to 4 in. sizes with stub fittings on both ends to allow for use with set-screw and compression fittings. They bend to one or more angles with just elbow grease, knee, or hammer, to full 90° bend or any position in between, and they can also be re-bent. Internal diameter is maintained per NEC specification, and fittings are suitable for indoors and dry locations and are UL Listed and CSA Certified.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Flexible Conduits | Conduit & Cable Fittings

Liquid Tight Connectors provide corrosion resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:55:19 -0600

Rated IP68 and NEMA 4X, Stainless Steel Liquid Tight Connectors are available in 90° and 3/8-1 in. sizes. Units feature nylon insulated throat, Viton O-ring, NPT threads, and 304 stainless steel body and ferrule. Suited for wet or dry locations, connectors seal against dust, dirt, oil, water, and chemicals. Applications include food and beverage processing, pulp and paper mills, wastewater treatment, electrical motors, and machine tool building.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Liquid-Tight Conduit & Tubing System Connectors

Combination Coupling allows joining of EMT to 2 AC/MC cables.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Apr 2008 07:37:19 -0600

Model 4157-DC is duplex AC/MC connector with cable range from 14/2 to 10/3 metal clad cable and ¾ in. electrical metallic tubing (EMT). Couplings' internal dimension allows conductors to pass through to EMT conduit without damaging conductor insulation. Transition fitting is suited for new construction and retrofit applications in schools and commercial buildings.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Electrical Fittings | Electric Conduit & Cable Connectors | Couplings

Cable Tie Holder uses pressure to facilitate assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Feb 2008 08:00:44 -0600

Pressure hold cable tie holder Model FTH-33 allows pre-assembly of cable tie into holder and secures it in position. Cupped mounting base prevents dust ingress while providing tight grip to board in environments prone to vibration. Part accepts all Richco QTE-30/50 and WIT-30/50 cable ties.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Material Handling and Storage Sponsored by: Asymtek - Newsletter Ad

Search for suppliers of: Electric Cable Holders | Conduit Cable Clips | Cable Ties

Harness Wrap Clip can be adjusted to hold various sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Feb 2008 08:00:44 -0600

RoHS-compliant SHR-C Series, comprised of snap-fit and screw-mount base versions, lock securely and can be reopened for maintenance. Able to hold SHR-20 and SHR-25 slit harness wrap sizes, adjustable clip is designed to accelerate installation and features internal ribs that hold harness wrap firmly.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Conduit Cable Clips

Electrical Connectors withstand harsh applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Feb 2008 07:44:43 -0600

Protected from water, dust, oil, grease, fumes, and other hostile contaminants, liquidtight ST Series is available pre-assembled with integrated KO sealing ring. Cable and conduit connectors are made from bar stock steel or malleable iron with small turning radius for installation in tight spaces. Offered in 3/8-5 in. sizes in straight, 45°, and 90° configurations, connectors feature crimpable ferrule to secure mechanical grounding and deep ferrule threads that prevent pullout.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Sealed Connectors | Electric Conduit & Cable Connectors

Vandal-Proof Fittings are designed for long conduit runs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 05 Jun 2007 07:43:50 -0600

Type AXB expansion fitting suits elongated conduit runs installed in areas subject to vandalism, theft, harsh weather, and wide temperature variations. Used to permit linear movement in conduit runs caused by thermal expansion, preventing conduit buckling or disconnection, AXB incorporates internal bonding jumper to facilitate installation and maintenance. No disassembly is required during installation, and outer casing slides open to view jumper for no-tools field inspections.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Electrical Fittings | Conduit & Cable Fittings

Mounting Clips prevent movement of electrical conduit.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 May 2007 07:29:27 -0600

Characterized by precision-molded, 2-piece mechanism with attached integral locking closure, Flexicon Conduit Mounting Clips provide secure means of mounting Flexicon FPAS or FPI liquid-tight conduit, cables, and tubing into vertical or horizontal indoor/outdoor configurations. Constructed from polyamide 6/6 Nylon, units accommodate .25-2 in. conduit and tubing and are resistant to salt water, weak acids, gasoline, oil, grease, and common solvents.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Tube Clips | Conduit Cable Clips

Combination Mount routes wires and cables.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Mar 2007 07:38:53 -0600

Molded in black or natural nylon 6/6, Combo Cradle Mount offers chemical resistance and optimal wear properties. Large base assures stable mounting surface and can be secured with screw or rivet. Part can be used with standard or hook-and-loop wire ties to route bundles of wires, cables, or tubing.

This story is related to the following:
Chemical Processing and Waste Management
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mounting and Attaching Products

Search for suppliers of: Nylon Products | Conduit Cable Clips | Cable Tie Mounts

Fittings enable cables to be installed in railings.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Sep 2006 07:46:22 -0600

Attached to cables by hand, field-installed Push-Lock(TM) Fittings eliminate need for swaging equipment. Cables come with tensioner on one end and bare cable on other end. Installation consists of cutting cable, pushing on fittings, and tensioning cable. When installed, there are no acorn nuts or rough cable ends and separate caps to deal with. Stainless steel fittings can be used with wood or metal framed railings, indoors or outdoors. Styles are available for level runs and stairs.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Safety and Security Equipment

Search for suppliers of: Stainless Steel Fittings | Railing Fittings | Cable Fittings

Conduit Connectors offer corrosion and UV resistance.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Aug 2006 07:47:10 -0600

Designed to connect metallic-cored liquidtight conduit to box or enclosure, Stainless Steel Liquidtight Conduit Connectors are available in straight, 45°, and 90° configurations in sizes to fit conduit from 3/8-2 in. Connectors in sizes 3/8-1 in. offer steel ground cone with Dura-Plate® finish, while connectors in sizes 1¼-2 in. offer brass ground cone plated with nickel. UL® Listed Ratings include 3, 3R, 4, and 4X.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Liquid-Tight Conduit & Tubing System Connectors

Push Mount Wire Clips mount in .250 in. diameter hole.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Aug 2006 08:23:49 -0600

Molded in natural nylon 6/6, releasable Push Mount Wire Clips are designed to fit panel thickness of .020-.070 in. and accommodate maximum wire bundle diameter of ¾ in. Units can be opened and closed multiple times for adding or removing wires or cables. Large contoured base assures stable mounting.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Wiring Clips | Conduit Cable Clips

Releasable Clip enables adding or removing wires.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 Jun 2006 07:59:23 -0600

Adhesive-based Releasable Wire Clip has positive latch design for multiple open/close cycles used for adding or removing wires. Part is molded in natural nylon 6/6 with double coated adhesive foam tape for installation without mounting screws or holes for push mounts.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products

Search for suppliers of: Wiring Clips | Conduit Cable Clips

Connectors and Conduit endure continuous flexing.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 Jun 2006 07:37:46 -0600

Able to withstand vibration and corrosive environments, Type A Liquidtight Connectors and Conduit are suited for cable carrier installation, robot assembly, automotive applications, as well as outdoor signs and lighting at more than 1,000 V. Ranging from 3/8-2 in., conduit is constructed of flexible PVC cover with woven nylon web bonded to seamless flexible PVC inner core. Ferrous connectors have nylon-insulated throat and Santoprene® sealing gasket with 316 SS retaining ring for NEMA LT seal.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Flexible Conduits | Liquid-Tight Conduit & Tubing System Connectors | Liquid-Tight Conduits

Tray/Cord Fittings suit Class I Gas and Vapor environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 16 Jan 2006 07:07:51 -0600

Able to terminate portable cord and tray cables in hazardous locations, T&B® Fittings Silver Grip® TCF® Series includes aluminum and 316 stainless steel models with respective hub sizes from ½-2 in. NPT and ½-1 in. NPT. Features include tapered neoprene bushing and O-ring seal impermeable to moisture and dirt. Able to be tightened by hand, without tools, fittings employ chuck grip with mechanical pullout that exceeds applicable performance requirements.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Conduit & Cable Fittings | Stainless Steel Fittings | Aluminum Fittings