ThomasNet Industrial Newsroom -

Quick-Disconnect and Patch Cables feature LED indicators.

info@productnews.com (ThomasNet News) — Fri, 06 Nov 2009 08:43:09 -0500

Available in 6 lengths from 0.3-10 m, Patch Cables have right-angle M12 female plug with LED indicator on one end and axial male connector on other end. Polyurethane jacket enables use in oily and direct sunlight applications. Offered in 2, 5, and 10 m lengths, Quick Disconnect Cables include LED indicator to confirm signal presence. They have M12 right-angle female plugs and can be used with patch cables to extend distance.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Patch Cables | Sensor Cables

Wall Mount Adapters come in 5 international outlet sizes.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:43 -0500

Available in 5 and 9 Vdc outputs, PSC12x Series consists of A, E, K, S, and C fixed plug versions for use in US, Europe, UK, Australia/New Zealand, and China, respectively. Units are double insulated, meet Class B EMI standards, and feature short-circuit protection with auto-restart, as well as over-current and over-voltage protection. Per ENERGY STAR Level V efficiency standards, all models feature power draw of less than 0.3 W at no-load.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Green & Clean

Search for suppliers of: Wall Plug-In Power Supplies | Wall Mounting Power Supplies | AC/DC Wall Plug-In Adapters

Testing/Charging System helps monitor EMTA battery status.

info@productnews.com (ThomasNet News) — Thu, 05 Nov 2009 08:43:34 -0500

Battery Testing and Charging System helps cable system operators test, re-charge, and redeploy batteries from EMTA deployments. Comprised of servers, testing software, and tester/charger, system can be stacked to service up to 192 batteries in one 19 in. rack. It provides complete testing and battery charging linearity test for 2-, 3- and 4-cell battery packs. System can also plot minute by minute charging reports; provide current and voltage curves; and test power drain linearity.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Sensors, Monitors and Transducers

Search for suppliers of: Battery Changers | Battery Test Equipment

Hospital Grade Plug lights up to indicate active connection.

info@productnews.com (ThomasNet News) — Thu, 29 Oct 2009 08:32:04 -0500

Designed for dimly lit environments, 0310.120LT lets specialists in medical field know if connection is on. It consists of standard NEMA 5-15P Hospital Grade Green Dot Plug configuration with internal LED that will light up when cord is plugged into power source. This 10 ft power cord uses 18/3 AWG cable with Grey SJT jacket, and equipment end is IEC-60320-C13 Clear. Featuring UL and C-UL approvals, cord carries 10 A, 125 V rating.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Health, Medical and Dental Supplies and Equipment

Search for suppliers of: Electronic Plugs | Power Supply Cords | Hospital Cord Sets | Electric Cords

System IP Products aid low-power, media-rich SoC designs.

info@productnews.com (ThomasNet News) — Thu, 29 Oct 2009 08:31:57 -0500

Balancing low latency with guaranteed bandwidth, AMBA® Network Interconnect (NIC-301) with QoS delivers rich media experience from ARM Cortex(TM) CPUs, Mali(TM) GPUs, and Video processors. AMBA Dynamic Memory Controller (DMC-342) supports LPDDR2 memories and manages memory power modes to reduce system level power consumption. AMBA Verification and Performance Exploration (VPE-301) tool enables creation of what-if scenarios to explore performance of subsystems.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Interconnect Devices | Memory Controllers | Evaluation Boards

Wire and Cable are designed to meet solar market demands.

info@productnews.com (ThomasNet News) — Wed, 28 Oct 2009 08:34:09 -0500

Solar cables and photovoltaic (PV) wire withstand harsh environments - temperatures from -40 to +90°C, ozone and UV radiation, moisture, oil, direct burial - of solar energy applications. Available in wire range from 14-2 AWG, PV wires come in 2 versions to meet UL 4703 PV wire/TUV 2 PFG 1169 requirements or UL 4703 PV wire requirements. Solar cables, offered in 18-12 AWG sizes and conductor counts from 3-9, are available shielded or unshielded.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Green & Clean

Search for suppliers of: Solar Cell Wire | Electric Cables

Card Edge Connectors support 1.58 mm add-on graphics cards.

info@productnews.com (ThomasNet News) — Mon, 26 Oct 2009 08:53:53 -0500

Featuring 1.00 pitch, Card Edge Connectors support PCI Express® standards for signal and power as well as auxiliary signals at interface between motherboard and add-in card. Units are rated at 1 A/contact and offer x1, x4, x8, x16, x24, and x32 contact positions to accommodate range of bandwidth requirements. Serial lanes are comprised of 2 differential wire pairs that support data transfer rate of 500 MB/s in each direction, per lane. They feature 2.5 GHz clock rate and 5 GT/s bit rate.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices

Search for suppliers of: High Density Connectors | Card Edge Connectors

Tamper-Resistant Receptacles have built-in surge protection.

info@productnews.com (ThomasNet News) — Fri, 23 Oct 2009 08:35:43 -0500

Available in commercial/industrial and hospital grade versions with 15 and 20 A, 125 V ratings, Smart Grid Tamper Resistant Receptacles feature protective shutters that accept only 2-prong electrical plug and also provide built-in surge protection for sensitive electronics. NAFTA-compliant devices provide EMI/RFI noise filtering and afford point-of-use protection for up to 18,000 A of surge current. Units also comply with NEC Section 406.11 and UL 1449's 3rd Edition.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Green & Clean

Search for suppliers of: Straight Blade Electric Receptacles | Electric Receptacles

Interconnect System features fully sealed design.

info@productnews.com (ThomasNet News) — Thu, 22 Oct 2009 08:41:20 -0500

Maintaining low and stable contact resistance under severe temperatures and vibrations, MX123(TM) System is optimized for transportation power-train applications. Matte seal technology allows close-to-center terminal spacing and eliminates need for crimping individual cable seals, while interfacial seal is interior to connector shroud, protecting it from damage during harness handling. Header pins are protected from scooping by center wall that extends longer than terminal length.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Interconnect Devices | Sealed Connectors

PROFINET-IRT Interface features Siemens ERTEC-200 processor.

info@productnews.com (ThomasNet News) — Wed, 21 Oct 2009 08:42:10 -0500

Combining Profinet interface with IRT functions according to Class C standard, Anybus-S Profinet-IRT interface includes analog/digital components and 2-port real-time switch. Integrating 2 SC-RJ fiber optic connectors for physical network connection, embedded communication module features dual-port RAM-based hardware and software interface, with interchangeability facilitated by 16-pin RJ11 connector. Fiber optic transmission enables high immunity to EM disturbances.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Communication Systems and Equipment
Test and Measuring Instruments

Search for suppliers of: Communication & Connectivity Devices | Fiber Optic Communication Systems | I/O Modules

Medical Socket Strip has 4 NEMA hospital grade outlets.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:25 -0500

Medical Socket Strip is rated for maximum of 15 A with service at 125 V and features manual reset circuit breaker. Designed to be permanently attached to fixture, such as cart or some other type of item in hospital or dentist office, product has attached hospital grade power cord that can be ordered in lengths up to maximum of 25 ft. Outlet covers can also be attached as optional feature.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power, Multiple Outlet & Surge Suppressor Type Electrical Outlet Strips | Electric Outlets | Electric Terminal Strips

Medical Socket Strip has 6 NEMA hospital grade outlets.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:25 -0500

Bus Access Cables support test of RS232 interfaces.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:11 -0500

SCANFLEX® 9305-BAC/RS232 Bus Access Cables, when used with multiport module SFX9305, enable test of RS232 interfaces in combination with extended JTAG/Boundary Scan operations. Cables can be plugged into each free port of module, with interface recognized and configured automatically and BAC type/number defined by user. Interface functions contain stepwise handling of protocol layers, including bidirectional data transfer, allowing users to control interface target/identify faults.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Communication Cables | Data Cables

IP68-Rated Connectors feature ATEX approval.

info@productnews.com (ThomasNet News) — Tue, 20 Oct 2009 08:41:11 -0500

Compliant to ATEX standards for use in Zone 2 and Zone 22 environments, EXPlora series is made from UL94V-0 rated Polycarbonate material and environmentally sealed. Connectors come in 2-, 3-, 4-, 5-, 7-, and 10-pole variants and 4 body styles: cable, in-line cable, panel, and flange fixing. Each contact insert is available with pin or socket contacts and can be used with any body style. Depending on number of poles, ratings range from 18 A, 600 Vac/dc to 10 A, 250 Vac/dc.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Harsh Environment Connectors | Electric Cable Connectors | Electric Connectors

Cable Assembly complies with SFF specification for 10 Gbps.

info@productnews.com (ThomasNet News) — Mon, 19 Oct 2009 08:37:56 -0500

Fully compliant with SFF-8431 Revision 4.1 specification, 10 meter SFP+ Copper Cable Assembly can go 3-5 m longer than other passive options. Product uses GORE(TM) EYE-OPENER+® Conductor Technology and low-loss expanded PTFE cable dielectric, which balances waveform distortion penalty and voltage modulation amplitude parameters to achieve results within specification limits set forth by SFF-8431 committee. dWDP and VMA loss are 5.60 dBe and 3.95 dBe, respectively.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Data & Telecommunications Cable Assemblies | Copper Cable Assemblies | Cable Assemblies

Feedthru System eliminates stress on cables.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:21 -0500

Designed with field-attachable feedthru connector, mating attachable cable connector, cross-over adapter, and accompanying hardware, Field-Attachable Packer Feedthru System allows connector to be installed on top side of packer, eliminating need to splice downhole cables. Variable threaded system enables vertical adjustment of up to 3 in. Featuring max diameter of 2.6 in., system is rated to 5,000 Vac with current to 140 A and pressure to 5,000 psig.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electrical Feedthroughs

Coaxial Cable Stripper offers efficient, portable design.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:37 -0500

Designed for portability and weighing only 2 lb, Model 824 Coaxial Cable Stripper can strip cables including RGU, semi-rigid, plenum, heliax, and more, as well as semi-rigid cable up to .141 in. OD. It features standard battery pack that provides about 200 strips/charge. Carrying case, charger, and adapter cord are included.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Cable Strippers | Coaxial Cable Strippers

Multipin Connectors offer tool-less installation.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:33 -0500

Intended for commercial aircraft wiring systems, QM Rectangular Connectors feature quick-lock technology, which withstands shock, vibration, noise, and high temperatures. Track and mate is performed through rail mount installation without tools. Rails are manufactured with high-conductive metal plating on composite shells. Utilizing shell polarization positions and EPXB standard inserts, connectors offer integral strain relief with optional EMI backshell to meet severe airborne requirements.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Rectangular Connectors | Multipin & Coaxial Connectors | Aircraft Connectors

Network Cabling features multichannel CAT5e-rated design.

info@productnews.com (ThomasNet News) — Thu, 15 Oct 2009 08:34:30 -0500

Multipin-based MCAT5 network cabling system includes tails that support 6 channels of 10/100/1000BASE-T signals and equipment requiring 4 pairs/RJ45. Tails are color-coded for identification and terminated with RJ45 or etherCON connectors. Featuring double-jacketed, shielded design, system has 0.57 in. dia and weighs 14 lb/100 ft, and cable sections are available in lengths up to 250 ft. Product's G-Block rectangular connector design eliminates cross-threading/locking ring damage.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Cabling Systems | Shielded Cables | Category 5 Cables

N Connectors are designed for RF transmission applications.

info@productnews.com (ThomasNet News) — Wed, 14 Oct 2009 08:33:06 -0500

Designed to meet high-speed, low loss applications, 50 <font face='Symbol'>W</font> N Connectors are tested and verified from 30 MHz to 6 GHz, with maximum VSWR of 1.25:1. Series consists of 8 male N connectors (plugs) and 8 female N connectors (jacks). Insulators are made of teflon, center contacts are gold-plated, and outer contacts are either silver or nickel-plated. Suitable applications include cell site transmissions, broadcast STLs and RPUs, and wireless microphone diversity antennas.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Broadcast Connectors | Coaxial Connectors | RF Connectors | Cable Connectors