ThomasNet Industrial Newsroom -

Wireless Conductivity Transmitter is WirelessHART(TM)-enabled.

info@productnews.com (ThomasNet News) — Fri, 25 Sep 2009 08:36:19 -0500

Compatible with 2- and 4-electrode sensors, Model 6081-C suits conductivity applications too difficult to reach or too dangerous to access via wired transmitter. It functions in self-organizing network, in which every wireless device in network acts as router for nearby devices to ensure optimal data transmission reliability and network availability. Analytical field instrument offers measurement span of 0-600,000 µs/cm as well as diagnostics and intelligent power management.

This story is related to the following:
Optics and Photonics
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Transmitters | pH/Oxidation-Reduction Potential (ORP)/Conductivity Transmitters

Transducers provide DC current monitoring.

info@productnews.com (ThomasNet News) — Tue, 25 Aug 2009 08:27:38 -0500

Available for differential and ground fault current monitoring, space flight Series S 767 and military grade Series 913 B provide isolated analog output directly proportional to input magnetically. Featuring ½ in. aperture, Series S 767 operates on 22-36 Vdc power with response time of 50 ms. Series 913 B, designed with ¾ in. aperture, operates from 24-32 Vdc power with response time of 1 ms. Both chassis-mount series feature 0 to +5 V output and accuracy of 1% FS.

This story is related to the following:
Sensors, Monitors and Transducers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Electronic Detectors | Current Sense Transformers | Current, Voltage, Power Transducers | Current Sensors | AC Current & DC Output Sensors | Sensors | Current, Voltage & Power Measurement Instruments | Voltage Detectors | Inductive Detectors | Ground Fault Detectors | Current Indicators

AC Current Detectors come in clamp-on and pass-thru models.

info@productnews.com (ThomasNet News) — Thu, 16 Jul 2009 14:34:44 -0500

Designed to compare AC input to fixed or adjustable current threshold, Series 870 and ACS-3 provide isolated switch or relay output that is activated as required. Housed in metal case and operating from -20 to +71°C, Series 870 features SPDT relay output with 10 A contacts, frequency from 47-63 Hz, and ¾ in. dia aperture. Series ACS-3, operating from -50 to +65°C, is housed in plastic case with solid state switch output, frequency from 6-100 Hz, and response time of 200 msec.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Current Sense Transformers | Current, Voltage, Power Transducers | Current Sensors | AC Current & DC Output Sensors | Sensors | Current, Voltage & Power Measurement Instruments | Voltage Detectors | Inductive Detectors | Ground Fault Detectors | Clamp-On Harmonic/Transient AC Current Monitoring Sensors | Current Indicators

Transmitter supports FOUNDATION(TM) fieldbus communications.

info@productnews.com (ThomasNet News) — Wed, 08 Jul 2009 08:33:43 -0500

Rosemount® Analytical OCX8800 oxygen and combustibles transmitter delivers stable and reliable measurements under many coal-fired conditions, allowing operators to fine-tune fuel-to-air ratio and minimize NOx emissions by properly monitoring burner performance. NEMA 4X rated for weather and corrosion resistance, device can be configured for general purpose installations or for hazardous area locations in which CSA/FM Class 1, Zone 1 ATEX II 2 G EExd and IECex ratings are required.

This story is related to the following:
Sensors, Monitors and Transducers
Optics and Photonics
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Oxygen Monitors | Combustibles Monitors | Transmitters

Discrete-Input Transmitters enable wireless plant monitoring.

info@productnews.com (ThomasNet News) — Mon, 01 Jun 2009 08:22:45 -0500

Approved for hazardous areas, STXW 500 and STTW 401 convert any measurement device with contact-closure switch input into wireless input. Products can transmit signals from up to 3 contact switches; STXW 500 accepts 3 discrete/digital inputs, while STTW 401 accepts thermocouple input and 2 discrete/digital inputs. Both work under OneWireless(TM) industrial wireless mesh network and are suited for applications such as monitoring level switches, pump status, and system alarms.

This story is related to the following:
Optics and Photonics
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Communication Systems and Equipment

Search for suppliers of: Transmitters | Wireless Transmitters

Non-Invasive Current Transducer measures up to 4,000 A.

info@productnews.com (ThomasNet News) — Thu, 28 May 2009 08:33:14 -0500

Able to measure currents to 4,000 ARMS in conductors of up to 268 mm dia, ITL 4000-S allows isolated measurement of AC, DC, and pulsed currents up to three times nominal value for peak measurement at frequencies to 50 kHz (±1 dB). Closed-loop Fluxgate technology ensures measurement accuracy (±0.1% of IPN) over -40 to +70°C operating range. This accuracy also allows measurement of small DC currents in presence of large AC components.

This story is related to the following:
Sensors, Monitors and Transducers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Current, Voltage, Power Transducers | Closed Loop Current Transducers

Current Transducers meet military/industrial specifications.

info@productnews.com (ThomasNet News) — Wed, 01 Apr 2009 08:34:40 -0500

With supply voltage of +22 to +32 Vdc, military-grade, bi-directional Series S651 provides output of 0 to ±5 V with accuracy of 1% full scale. Current ranges are 0 to ±100 A to 0 to ±200 A. Operating from -40 to +65°C, devices feature frequency range of DC-3.5 kHz and 100 µsec response time. Industrial grade, bi-directional Series S764 offers current ranges from 0 to ±20 A to 0 to ±100 A.

This story is related to the following:
Sensors, Monitors and Transducers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Test and Measuring Instruments

Search for suppliers of: Transducers | Sensors | Current Sense Transformers | Current, Voltage, Power Transducers | Hall Effect Sensors | Current Sensors | Current, Voltage & Power Measurement Instruments

GWR Transmitters automate tank level measurements.

info@productnews.com (ThomasNet News) — Mon, 16 Mar 2009 08:30:06 -0500

Designed for harsh conditions, Rosemount® 3300 Series Guided Wave Radar (GWR) transmitters with Hart to Modbus Converter help companies increase labor safety as well as reduce operating costs and road maintenance. Modbus RTU, Modbus ASCII, and LevelMaster protocols, combined with ability to configure transmitter remotely over the Modbus communication wires using Hart, provide users in oil and gas industry with real-time level and interface measurement.

This story is related to the following:
Sensors, Monitors and Transducers
Optics and Photonics
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Radar Wave Guided Level Transmitters | Level Transmitters | Transmitters

Transmitter helps locate underground utility lines.

info@productnews.com (ThomasNet News) — Mon, 09 Mar 2009 08:32:15 -0500

Dynatel Locators 2200M Series 12 W transmitter provides four active frequencies (577 Hz and 8, 33, and 200 kHz), which can be used individually or simultaneously to compensate varying field conditions and 3 induction frequencies (8, 33, and 200 kHz). It uses either internal 6 x C-size alkaline batteries or rechargeable sealed gel-cell battery that plugs into external power plug. Unit features ohmmeter function and high voltage detection, with 240 Vac output protection.

This story is related to the following:
Test and Measuring Instruments
Optics and Photonics
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Line & Cable Locators | Transmitters

Current Transducers measure current from 6-50 Arms.

info@productnews.com (ThomasNet News) — Fri, 20 Feb 2009 08:37:12 -0500

Designed for AC and DC isolated current measurement from 6-50 Arms nominal, CAS, CASR and CKSR family of PCB mounted current transducers feature 7-30 ppm/K of thermal offset drift, and have response time less than 0.3 microsec. Products utilize Closed Loop Fluxgate technology, and operate from single 5 V supply. Plastic case of unit has Comparative Tracking Index of 600. CKSR model has one more primary pin than 3 pins of CAS/CASR models which enables creepage and clearance distances of 8.2 mm.

This story is related to the following:
Sensors, Monitors and Transducers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Current, Voltage, Power Transducers

Single-Channel UARTs support VLIO bus interface.

info@productnews.com (ThomasNet News) — Wed, 18 Feb 2009 08:30:17 -0500

Featuring supply voltages from 1.62-3.63 V, XR16M581/XR16M681/XR16M781 are 16-, 32-, and 64-byte FIFO devices, respectively, all of which come in 24-pin QFN, 25-pin BGA, or 32-pin QFN package. This provides flexible design options for system architects targeting portable applications. Along with support for data rates up to 20 Mbps, features include selectable or programmable transmit and receive FIFO trigger levels, Fractional and Independent TX/RX Baud Rate Generators, and IR mode.

This story is related to the following:
Optics and Photonics
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Transmitters

Transducer features overload capacity up to 1,000 A.

info@productnews.com (ThomasNet News) — Mon, 05 Jan 2009 08:37:38 -0500

Based on low consumption Fluxgate Technology, Series DCT-200A measures DC, AC currents, with precision levels of 99.9% of linearity and 5 ppm of linear error. It offers wide band-width of up to 100 kHz, up to 200 A, and measures 52 x 52 x 37 mm. Featuring immunity to all kind of interferences, unit suits energy measurement systems, medical equipment, high stability inverters, and high power supply applications.

This story is related to the following:
Sensors, Monitors and Transducers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electrical Transducers | Power Transducers | Current, Voltage, Power Transducers | Transducers

Transducers measure -90 to +90 phase differences.

info@productnews.com (ThomasNet News) — Wed, 05 Nov 2008 07:16:25 -0500

Designed to sense phase angle difference between ac current and voltage signals, CR6300 Series includes 3 models with 0-5 Vdc, 0-10 Vdc, or 4-20 mAdc output. Units are powered by single 24 Vdc power supply, and have window openings to accommodate current carrying wires up to .26 in. diameters. They offer up to 500 V input voltage and up to 25 A of current. Housed in 3.26 x 1.42 x 2.99 in. package, transducers can be mounted on 35 mm DIN rails or surface panels.

This story is related to the following:
Sensors, Monitors and Transducers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Current, Voltage, Power Transducers

Single Channel UARTs target portable devices.

info@productnews.com (ThomasNet News) — Thu, 09 Oct 2008 07:36:09 -0500

Single-Channel Universal Asynchronous Receiver Transmitter (UART) Series includes XR16M570, XR16M580, XR16M670, XR16M680, XR16M770, and XR16M780 models. Packaged in 3 x 3 mm BGA, devices include auto RTS/CTS hardware and auto XON/XOFF software flow control, TX/RX FIFO counters, fractional baud rate generator, and auto RS-485 half-duplex direction control. Available in Multidrop, infrared, and PowerSave modes, units feature 16 Mbps performance and independent TX/RX baud rate support.

This story is related to the following:
Optics and Photonics
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Transmitters

Summing Transmitter powers up to 4 load cells.

info@productnews.com (ThomasNet News) — Thu, 09 Oct 2008 07:36:06 -0500

Designed for multiple load cell systems, Model 4800 can be powered from 115 Vac, 230 Vac, or 11-30 Vdc. Unit has built-in excitation supply capable of delivering up to 120 mA at 10 V, enough current to drive four 350 <font face='Symbol'>W</font> load cells. Input is isolated from output and both are isolated from supply voltage, eliminating unwanted ground loop problems. Full scale live load signals as low as 5 mV can be amplified to 20 mA or 10 V with overall accuracy of ±0.1%.

This story is related to the following:
Electronic Components and Devices
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Optics and Photonics
Sensors, Monitors and Transducers

Search for suppliers of: Signal Isolators | Transmitters | Analog Transmitters | Load Cell Transducers

Analog Transmitter provides 4-20 mA or 0-10 Vdc output.

info@productnews.com (ThomasNet News) — Tue, 16 Sep 2008 07:45:25 -0500

Designed for complete signal isolation, 8900 Series includes 16 dc powered signal conditioners to offer 8 inputs, including 0-50 and 0-100 mV, 0-5, 0-10, and 0-100 V, and 4-20, 0-20, and 0-50 mA, which can be combined with choice of 2 outputs. It employs 3-way signal isolation topology, where input is isolated from output and both are isolated from supply voltage. UL 508/1604 compliant series comes in 4.3 x 0.89 x 2.9 in. plastic case with built in DIN Rail mounting foot.

This story is related to the following:
Electronic Components and Devices
Test and Measuring Instruments
Optics and Photonics
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Analog Transmitters | Signal Conditioners | Transmitters | Signal Isolators

Transformer has rated voltages range from 72-800 kV.

info@productnews.com (ThomasNet News) — Fri, 22 Aug 2008 07:48:31 -0500

Suited for high voltage network applications, Magneto optical current transducer (MOCT-P) optical instrument transformer has free-standing sensor column that communicates with rack mounted electronic module, located in control house, by means of 200/230 multimode optical fibers. It features multiple analog 200 mV low voltage outputs, SF6 free design, and accurate reproduction of fault events. Unit can be used in transmission line, bus, transformer, breaker, or distribution schemes.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Electronic Components and Devices
Sensors, Monitors and Transducers

Search for suppliers of: Current, Voltage, Power Transducers | Current Transformers | High Voltage Transformers

Stimulus Transmitter has dual-band, high-power design.

info@productnews.com (ThomasNet News) — Thu, 14 Aug 2008 07:54:17 -0500

Used for drive-study analysis, Tortoise(TM) contains ultra-clean, Class A amplifiers for simultaneous, dual-band independent transmissions from one portable unit. Four fans provide cool operation, and internal dual amplifiers simultaneously transmit up to 45 W each. Along with direct and remote control capabilities, unit offers built-in over-voltage protection, forward/reverse power measurement, and internal/external temperature measurements. Optional WiMAX modulator is also available.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Optics and Photonics

Search for suppliers of: Transmitters

Power Transmitter is suited for outdoor use.

info@productnews.com (ThomasNet News) — Wed, 13 Aug 2008 07:43:39 -0500

Enclosed in weather- and temperature-proof housing, R&S NV8303VO has output power of up to 900 W. Suited for setting up new mobile-TV or pilot-test networks, transmitter supports ATSC, MediaFLO(TM), DMB-T, DVB-T/-H digital standards, as well as standards such as A-VSB. Independent of existing infrastructure, it can be used in inaccessible areas, and can be set up anywhere and connected to network for emergency use when main transmitter fails or needs to be serviced.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Current Transmitters

Octal UARTs combine 1.62 V power, 15 Mbps performance.

info@productnews.com (ThomasNet News) — Mon, 28 Jul 2008 07:52:32 -0500

Supplied in 100-pin QFP package, XR16M598 (16-Byte FIFO) and XR16M698 (32-Byte FIFO) are 8-channel UARTs with global interrupt status register and automatic hardware or software flow control. Only one chip select and one interrupt line is required per device, simplifying hardware design, and fractional baud rate generator eliminates need for extra crystal or external clock source. Features include programmable TX/RX trigger levels and automatic RS-485 half-duplex direction control.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Optics and Photonics

Search for suppliers of: Transmitters