ThomasNet Industrial Newsroom -

Turbomolecular Pumping System delivers portable, dry vacuum.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Aug 2008 07:39:37 -0500

Available in benchtop and mobile models, TPS-compact provides plug-and-play, hydrocarbon-free, ultra-high vacuum pumping. Portable, integrated system is powered by Turbo-V 81 MacroTorr(TM) or Turbo-V 301 Navigator(TM) pumps, including control and communications software, and backed by Varian IDP-3 Dry Scroll primary pump with maximum weight of 42.11 lb. System includes display that shows gauge pressure and indicates when tip-seal replacement is needed.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Portable Pumps | Turbomolecular Pumps | Vacuum Pumps | Pumping Systems

HEPA Vacuums are ESD safe.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Aug 2008 07:52:05 -0500

Omega Series Green Supreme vacuums come standard with true HEPA cartridge filter, 6 ft ESD safe hose, 16 in. ESD safe rubber flexible gooseneck, crevice tool, shoulder strap, and power cord. Vacuums safely cleans sensitive manufacturing equipment, electronics, cabinets, computers, and copy machines. Made from recycled plastic, units offer quiet operation at less than 70 dB.

This story is related to the following:
Cleaning Products and Equipment
Chemical Processing and Waste Management

Search for suppliers of: Industrial Vacuum Cleaners | HEPA Filtered Vacuum Cleaners | Vacuum Systems

Vacuum Generator is used for lifting/clamping/placement.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:02 -0500

Powered by compressed air, E-Vac series is comprised of low-vacuum units up to 21 in. Hg for porous materials and high-vacuum units up to 27 in. Hg for non-porous materials. Vacuum pumps are available in various sizes and flows, and selection of suction cups is available for range of applications. Engineered to minimize air consumption and increase cycle speeds, series has in-line, single stage design that delivers consistent, steady vacuum without fluctuations.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Pumps | Vacuum Generators

Drum Vacuum can vacuum 5 gal of liquid in less than 10 sec.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Jun 2008 07:36:03 -0500

Utilizing SS 2-way pump that is suited for use with most non-flammable liquids, Mini Reversible Drum Vac System can vacuum coolant, hydraulic oils, spills, sludge, tramp oil, and waste water; then pump it back out for disposal, storage, or reclamation. Compressed air powered unit has no moving parts such as motors or impellers to clog, freeze up, or wear out. With air consumption of 19 scfm at 80 psig, it features automatic safety shut-off valve to prevent overfilling.

This story is related to the following:
Cleaning Products and Equipment
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Compressed Air Powered Vacuum Cleaners | Industrial Vacuum Cleaners | Wet/Dry Vacuum Cleaners

Vacuum Generator converts compressed air to vacuum.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 22 May 2008 08:02:03 -0500

Vacuum Generator model V-4417-10 produces low-flow (1 scfm) vacuum using venturi principle. It converts compressed air to vacuum, consuming 4.9 scfh with 13 psi supply. Vacuum range is 0-15 in. Hg with 13 psi supply pressure, and max supply pressure is 20 psi. Along with recommended filtration of 5 microns, product features straight ports for 1/16 in. ID tubing, Polysulfone housing, and vinyl cap for covering unused output port.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Generators

Industrial Vacuum System utilizes VFD motor speed control.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 05 May 2008 07:44:28 -0500

Consisting of 2, 3, or 4 simplex oil-sealed liquid ring pumps, VmaxVFD systems are microprocessor-controlled and conserve energy by automatically adjusting pump speed to match varying vacuum demand. This also eliminates frequent stop-starts and promotes stable vacuum levels. Separately located variable frequency drive (VFD) main control panel provides single location for system control and aggregating alarm outputs for remote monitoring.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Liquid Ring Vacuum Pumps

Variable Speed DC Vacuum Pumps offer 45 lpm flow rate.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 01 May 2008 07:28:20 -0500

Offering 2-stage diaphragm mechanism with ultimate vacuum to 1.5 Torr, Welch® VARIFLOW(TM) Vacuum Pumps can be used for full chemical- and standard-duty operation in OEM and laboratory applications. Chemical Duty Model 8115D-20 uses PTFE heads/diaphragms and FKM valves, while Standard Duty Model 8115D-25 uses aluminum heads and EPDM diaphragms/valves. All models use 24 V brushless dc motors with maximum power consumption of 85 W and can restart under vacuum.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Chemical Pumps | Diaphragm Pumps | Variable Speed Pumps | Vacuum Pumps

Brushless dc Pump provides variable output.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Mar 2008 07:46:18 -0500

With dimensions of 4.25 x 4.63 x 3.02 in. and weighing 2.5 lb, 260 Series WOB-L® air compressor and vacuum pump is designed for medical and other applications requiring small size and light weight pump with variable output. Integral brushless dc motor, enclosed crankcase, and WOB-L® piston technology allow for variable output from 1,000-3,000 rpm. Other specifications include max flow of 1.5 cfm, max pressure of 30 psig, and max vacuum of 22 in. Hg.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Pumps | Air Pumps

Brushless DC Pump features 1,000-3,000 rpm variable output.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Mar 2008 07:46:18 -0500

Measuring 4.25 x 4.63 x 3.02 in. and weighing 2.5 lb, 260 Series brushless DC WOB-L® air compressor and vacuum pump is designed for medical and other applications requiring lightweight pump with variable output. It utilizes efficient brushless DC motor, enclosed crankcase, and WOB-L® piston technology. With maximum flow of 1.5 cfm at high speed, pump also offers maximum pressure of 30 psig and maximum vacuum of 22 in. Hg.9

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management
Material Handling and Storage
HVAC

Search for suppliers of: Vacuum Pumps | Air Compressors | Variable Speed Pumps

Brushless DC Pump suits medical applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Mar 2008 07:41:21 -0500

Measuring 4.25 x 4.54 x 3.02 in. and weighing 1.9 lb, Series 250 WOB-L® air compressor and vacuum pump delivers variable output from 1,000-3,000 rpm utilizing brushless DC motor, enclosed crankcase, and WOB-L® piston technology. Unit features max flow of 1.0 cfm, max pressure of 30 psig, and max vacuum of 22 in. Hg.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management
HVAC
Material Handling and Storage

Search for suppliers of: Vacuum Pumps | Motor Driven Compressors | Air Compressors

Vacuum Pump suits new semiconductor manufacturing processes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Feb 2008 08:00:39 -0500

Featuring modular design, iXH series of vacuum pumps meets increasing demands of emerging processes required for semiconductor manufacturing at 60 nm and smaller design rules. Gas Buster(TM) inlet purge helps deal with process byproducts and minimize system maintenance and Active Utility Control (AUC) includes idle mode for periods when pump is not in use. Pump mechanism can handle hydrogen and also withstands corrosive effects of ammonia.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Pumps

Turbomolecular Pump targets laboratory vacuum systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Feb 2008 07:44:52 -0500

Combining turbomolecular and drag stages with fluid dynamic stage, EXT406PX allows customers to build compact vacuum systems capable of withstanding high backing pressures even with continuous gas loads at main inlet. It can sustain normal operation at backing pressure of up to 17 mbar and has protection against mains variation on backing pump. System is available in 2 ranges: ISO and CF 160 with nitrogen pumping speeds of 400 L/sec and ISO and CF 100 with pumping speeds of 310 L/sec.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management
Laboratory and Research Supplies and Equipment

Search for suppliers of: Vacuum Pumps | Turbomolecular Pumps | Laboratory Equipment & Supplies

Air-Powered Vacuum Pumps can match process requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jan 2008 07:45:24 -0500

Anver FT Series Adjustable Flow Tubes use 3-9 scfm of compressed air to produce optimal vacuum and exhaust flow, variable from 18-145 scfm, and are available in 4 sizes. Precision machined from aluminum, explosion-proof products do not require O-Rings or gaskets and have straight-thru bore that lets material pass without clogging. They provide instant on/off and are designed to attach to 1, 1½, and 2 in. hose in various cooling/drying, removal, and feeding applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Pumps | Flow Tubes

Positive Displacement Vacuum Pumps use large area filters.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jan 2008 07:35:46 -0500

Using cartridge filter to protect pump, VAC-U-MAX PD Pump Packages exhibit smooth and quiet operation and are available from 3-100 hp. They come with cartridge filter, OSHA-approved belt guard, Glycerin-filled vacuum gauge, silencer, and high-vacuum relief valve. Suited for existing vacuum conveying systems or central vacuum cleaning systems, packages are also offered with options such as differential pressure switch and sound enclosures.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Pumps | Positive Displacement Pumps

Pest Management Vacuum offers HEPA- and ULPA-filtering.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jan 2008 07:15:43 -0500

Omega Series IPM (Integrated Pest Management) vacuum comes standard with HEPA cartridge filter or with optional ULPA cartridge filter, 9 ft clear safe hose, ESD safe 19 in. rubber flexible gooseneck, crack and crevice tool, along with two 20 in. extension wands, 25 ft power cord, and shoulder strap. Vacuum runs on 110 or 220 V, weighs 11 lb, and can be used to safely reach in and behind sensitive electrical components, wall boards, rafters, or other hard-to-reach places.

This story is related to the following:
Chemical Processing and Waste Management
Cleaning Products and Equipment

Search for suppliers of: Vacuum Systems | HEPA Filtered Vacuum Cleaners

Dry Vacuum Pump System suits degassing of steel alloys.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 27 Dec 2007 07:28:49 -0500

Facilitating maintenance, cleaning, and waste disposal, oil-free Dry Pumping System consists of HV30000, SN7000, and IDX1000 pumps arranged in 3 stages, pre-mounted, piped, and fully wired on 2-part skid. Each skid is nominally capable of vacuum degassing 23 tons of steel, so numerous skids can be mounted in parallel and integrated with steel degassing tank to suit required ladle sizes, typically up to 160 tons or more.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Dry, Oilless & Oil-Free Vacuum Pumps

Vacuum Pump eliminates need for cables and accessory rack.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 11 Dec 2007 07:45:25 -0500

Rated at 2,200 L/sec, iXA(TM) series of turbomolecular vacuum pumps exhaust process gases from physical vapor deposition, etching, chemical vapor deposition, or ion implant equipment in semiconductor, flat panel display, solar energy, and industrial glass coating applications. Pump includes 5-axis magnetic bearing system and RS232/485 (Profibus) serial communication interfaces. Unit features power supply and control modules that can be mounted in various configurations directly on pump.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Electric Pumps | Industrial Pumps | Turbomolecular Pumps

Dust Vacuums offer clog free filtering.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Oct 2007 07:43:56 -0500

CDCLarue(TM) Series of dust vacuums have fully automatic non-clogging filtration system that internally flushes filters clear during operation using only vacuum and ambient air. PTFE coated S.B.P. twist on filters eliminates dust particles as small as .1 micron. Features include steel dolly that has five 3 in. non-marking, conductive caster wheels, two handles that assist in dumping and moving tank, and microprocessors in PC Board that are designed for Pulse-Bac® filtration system.

This story is related to the following:
HVAC
Chemical Processing and Waste Management

Search for suppliers of: Dust Filtering Systems | Vacuum Systems

High Vacuum Pump has displacement rate of 180 cfm.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 25 Sep 2007 07:49:51 -0500

Capable of reaching ultimate pressures of 5 x 10<sup>-3</sup> torr, HVC 180 2-Stage Rotary Piston High Vacuum Pump is manufactured with redundant Viton® shaft seals that ride on hardened shaft sleeves to guard against leakage. It includes outboard bearings, exhaust valve decks, large oil sight port with visual oil flow indication, caged hinge bars, and heavy-duty shaft.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: High Vacuum Pumps | Rotary Piston Pumps

Vacuum Pumps power robotic end-of-arm tools.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 24 Aug 2007 07:45:23 -0500

Suited for pick-and-place applications, Modular Venturi Vacuum Pumps and end-of-arm tooling components mount to 1 and 1.5 in. extrusion to create complete wrist-down end-of-arm tool. Available in 7 models ranging from 2.5-8.5 in., pumps offer 3 performance levels. Model L ranges from 0-10 in. Hg for low vacuum/high flow applications, while Model M ranges from 0-20 in. Hg for med vacuum/high flow, and Model H ranges from 0-28 in. Hg for high vacuum/standard flow applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: High Vacuum Pumps | Vacuum Pumps