ThomasNet Industrial Newsroom -

Power Conditioners come in models ranging from 120-3,000 VA.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2008 07:38:31 -0600

ONEAC® PCm Series eliminates power contaminants and limits peak voltage and edge-speed of electrical transients by employing low impedance isolation transformer and Virtual Kelvin Ground® to remove full spectrum of power line noise in Common and Normal modes. Conforming to IEC60601-1 standards, medical grade power conditioners come with hospital-grade plugs and receptacles and in 120 and 230 V, 50/60 Hz with IEC connectors to facilitate country-specific connector compatibility.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Line Conditioners

Power Conditioner is designed for Fieldbus(TM) H1 networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Dec 2006 07:43:29 -0600

Available in simplex (non-redundant) and duplex (redundant) models, FPS200 TRUNKGUARD Fieldbus Power Conditioner provides conditioned power in general purpose and non-incendive applications. Simplex configuration allows up to 8 modules to be installed on single DIN-rail carrier, with each module providing 350 mA at 26 V of isolated power, fully compliant with FF831-1 specification. Duplex configuration provides redundant, load-sharing, and hot-swappable power conditioners.

This story is related to the following:
Controls and Controllers Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Line Conditioners | Fieldbus Components

Digital Filter suits industrial monitoring applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Oct 2006 07:48:53 -0600

Supplied in 3 x 3 mm QFN package, QF1D512 Simple and versatile FIR (Finite Impulse Response) engine (SavFIRe(TM)) precision digital filter facilitates process of adding precision digital filtering to applications. Single-channel filter can be added between existing ADC and host controller or connected as co-processor device for controllers with embedded ADCs. Companion Development Kit, QF1D512-DK, allows device to be configured to work with any ADC up to 24-bits.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Filter Module enables design of mil spec power systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 May 2006 08:04:35 -0600

Rated 200 W for 24/48 V power systems in military vehicles, aircraft, and naval vessels, Model DSF200LV has input voltage of 9-36 Vdc and is clamped at max output voltage of 36 Vdc. Unit provides 7 A continuous output with baseplate temperature of -40 to +100°C. Offering 92-98% efficiency, filter module has low-loss reverse voltage protection and series resistance of 0.26 ohms. It is designed for PCB mounting and is housed in conductively plated steel case.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Converter Filters | Filter Modules

Power Conditioner protects critical equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jan 2006 07:39:58 -0600

Within input voltage range of -25% to +15%, 3-phase SOLATRON Plus produces output voltage of less than ±5% of nominal voltage regulation to maintain stable, smooth power for processes and production. It incorporates shielded isolation transformers as well as encapsulated, all mode surge suppression, providing true voltage regulation, surge protection, and noise isolation. Available voltage configurations are 20, 30, 50 and 75 kVA, in combinations of 208, 480, and 600 V offerings.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Line Conditioners

Power Conditioners target global medical applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Feb 2005 08:32:29 -0600

Featuring 1,500, 2,000, and 3,000 Va models, medical-grade Series PCm eliminates power contaminants in medical applications with full-time, on-line isolating transformer, while conforming to IEC60601-1 global electrical safety standards. Units are available with hospital-grade plugs and receptacles and in 120 and 230 V, 50/60 Hz with IEC connectors. Applications include medical diagnostic equipment, imaging systems, analyzers, and audio systems.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Line Conditioners

Power Conditioner protects inductive loads.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jun 2004 08:03:24 -0600

SOLATRONâ"¢ Plus 3-Phase Power Conditioner protects against common power problems by providing true voltage regulation, surge protection, and noise isolation. Within input voltage range of -25 to +15%, unit produces output voltage of less than ±5% of nominal voltage regulation to maintain stable power for critical processes. Common voltage configurations include 20, 30, 50, and 75 KVA in combinations of 208, 480, and 600 V offerings.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Line Conditioners

Filter Device provides single-phase power protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 Mar 2004 07:51:04 -0600

TRABTECH Surge Filter includes coordinated TVSS and EMI/RFI filter circuit to provide tight voltage clamping, electrical noise filtering, sine wave tracking, and high surge current handling capacity. Suited for protecting sensitive electronic equipment, device offers diagnostic monitoring of protection status with local and remote failure indication. It features metal DIN rail mount housing and 20 A nominal current rating.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Surge Filters