ThomasNet Industrial Newsroom -

Relay Interface Modules are electromechanical.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Aug 2008 08:14:33 -0500

Featuring DIN rail mounting, coil and contact lead isolation, and voltage kick-back protection, IMRL electro-mechanical relay interface modules come in 1, 2, and 4 pole versions, each carrying maximum load of 10 A. They are available in control voltages of 5, 12, and 24 Vdc and 24, 120, and 230 Vac. Interface modules are offered with fixed relays pre-soldered to printed circuit board, relay socket only, or pluggable relays pre-installed into relay socket.

This story is related to the following:
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: Interface Modules | Electromechanical Relays | Custom Relays

Power Relay Module is supported by PXI compliant 3U chassis.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Aug 2008 07:46:23 -0500

Supporting high current and high voltage switching applications, model 40-330 SPST Power Relay Module provides 24 off SPST switches, each capable of switching currents up to 4 A and hot switching voltages up to 250 Vac. Cold switch rating of 1,000 V peak permits unit to be used for high voltage test applications where hot switching is not needed. User connections are provided on 50 way male high voltage D Type connector. Module includes software support for common programming environments.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Switching Relays | Programmable Relays | Power Relays | High Voltage Relays | Power Entry Modules

Arc Flash Relays help meet NESC 410.A.3 requirement.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Aug 2008 07:42:54 -0500

Models BE1-50/51B-235 and 237 are self-powered, single phase, overcurrent plug and play replacement relays that help electric utilities meet NESC 410.A.3 requirement by reducing duration of arc through fast fault clearing. Units directly fit into existing case without need for rewiring.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Safety and Security Equipment

Search for suppliers of: Arc Flash Safety Equipment | Plug-In Type Relays | Safety Relays

Distribution Controller helps reduce power outage times.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Aug 2008 08:07:45 -0500

SEL Distribution Automation Control System analyzes and detects permanent fault conditions such as broken jumpers, loss of substation source, and lockout due to miscoordinated protective devices, isolates affected feeder sections, and restores power to unaffected sections to reduce outage times. With ability to automate up to 6 sources and 100 devices, system includes drag-and-drop IEC 61131 function block configuration software on SEL information processor.

This story is related to the following:
Communication Systems and Equipment
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Protective Relays | Fault Locators | Automation Controllers | Power Distribution Systems

Universal Pushbutton offers 2 accessories.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jul 2008 07:35:55 -0500

With LT-1 Latching/Timer Module, UB-1 Universal Button can be used as latching module, which can be reset with closure of any type. When installed with normally open contact on door, unit will automatically reset without waiting for timer to expire. Digital timing circuit can be set for 15, 30, 45 sec or indefinitely. Featuring 12-24 Vac/Vdc operation, module has Form C contact rating of 3 A at 125 Vac/30 Vdc. Two-inch lens accessory is available to make Universal Button more noticeable.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Timer Switches | Latching Relays | Momentary Contact Switches | Pushbuttons | Pushbutton Switches

Monitors and Timers protect 3-phase equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:05 -0500

DIN rail mounted DLA Series 3-Phase Monitors protect equipment from adverse conditions such as phase loss (single phasing), undervoltage (brown-outs), and phase reversal (improper sequence). DTA Series Multifunction Time Delay Relays combine multiple timing functions and ranges into one DIN rail-mount package. Both are suited for users and OEMs in water, food, and automation industries.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Time Delay Timing Relays | Multifunction Relays | DIN Rail Mountable Relays | Power Monitors

Leak Detection Relays offer 3 different sensitivities.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:41 -0500

Single-channel Series SLD monitors shaft seal of submersible pump to detect leak before pump failure. Leak is detected by sensing status of float or conductivity switch installed in seal cavity. When resistance drops below set sensitivity, output relay energizes and LED indicator illuminates. Utilizing 120 Vac control voltage, relays offer sensitivities of 470 W fixed, 470 to 10 kW adjustable, and 4.7 k to 100 kW adjustable.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Alarm Relays | Sensing Relays

Relay detects leaks and over-temperature conditions.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:38 -0500

Series LDT monitors shaft seal and stator temp of submersible pump to help prevent failure. When leak is detected, output relay energizes, and LED indicator illuminates. Relay automatically resets when seal failure condition clears. NC temperature switch, mounted on stator, detects over-temperature, and bi-stable relay retains its position during power loss and latches on until remote reset button is pressed. Leak sensitivity is adjustable from 1 k to 35 kW.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions
Test and Measuring Instruments

Search for suppliers of: Temperature Monitors | Alarm Relays | Leak Detectors

RoHS Automotive Relays have switching capacity to 40 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Jun 2008 07:43:07 -0500

Offering contact arrangement options of SPST N.O., and SPST N.C., A2S Series features mounting bracket and quick connect termination of 6.3 to .250 mm. Units have contact resistance of less than 30 mW, insulation resistance of 100 MW at 500 Vdc, and shock resistance of 147 m/sÂ² for 11 minutes with vibration resistance of 1.5 mm double amplitude 10-40 Hz. Measuring 35.7 x 35.7 x 66.2 mm, relays have operating temperature of -40 to 85Â°C and storage temperature of -40 to 155Â°C.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Automotive Relays | Switching Relays | Shock Resistant Relays

Automotive Relays offer switching capacity to 20 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Jun 2008 07:43:41 -0500

With RoHS lead free AgSnO2 contacts, Automotive A4 Series relays offer contact arrangement options of SPST N.O. and SPDT. They have contact resistance of less than 30 mW, switching power of 280 W on single and 2 x 280 on dual package, and switching voltage of 380 Vac, 75 Vdc. Other features include insulation resistance of 100 mW at 500 Vdc, and shock resistance of 100 m/sÂ² for 11 minutes with vibration resistance of 1.27 mm double amplitude 10-40 Hz.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Switching Relays | Automotive Relays | Electronic Relays

Relay Output Module features USB/104 form-factor.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 May 2008 07:41:06 -0500

Measuring 3.550 x 3.775 in., Model USB-IDIO-16 features 16 individually optically isolated inputs and 16 fully protected, solid-state FET outputs capable of switching from 5-34 Vdc at up to 2 A. Unit is compatible with USB 1.1 and USB 2.0 ports and offers hot-plug functionality for quick connect/disconnect. Suited for industrial environments, module includes jumper-selectable filtering per input channel, and polarity insensitive AC/DC inputs that accept up to 31 Vdc or AC rms.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Test and Measuring Instruments

Search for suppliers of: I/O Modules | Solid State Relays

Solid State Relay is microprocessor controlled.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 19 May 2008 07:38:55 -0500

Featuring analog input and proportional output capabilities, RJ1P Series is capable of switching single phase 230, 480, or 600 Vac, up to 50 Aac loads with 5 different operating modes, when controlled by 0-10 Vdc or 4-20 mA signals. Rotary selector stitch is used for selecting preferred mode of operation, either phase angle, distributed full cycle, or 3 types of burst modes (1, 3, and 10 sec). Ready for DIN rail mounting, unit comes with integrated heat sink and varistor.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Solid State Relays

Solid-State Relays offer high-speed, -frequency switching.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 May 2008 07:38:55 -0500

Designed without switching contacts to promote reliability, OSSR Series come in hockey puck (panel mount) SIP1 and SIP2 packages and incorporate zero crossing circuit that minimizes current and noise surges due to resistive and inductive loads. Solutions lend design engineers ability to switch loads while isolating input from output. Available configurations - dc input/ac output, ac input/ac output, and dc input/dc output - offer range of input, load current, and load voltage values.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Switching Relays

Power Relay continuously applies up to 40 A at 440 Vac.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Apr 2008 07:44:46 -0500

Consuming less than 4 W DC power, G7Z Series is designed and insulated to apply up to 160 A using 4-pole parallel connections. Unit provides EN 60947-4-1 certified safety functionality via mirror contact mechanisms that use combination of relay and auxiliary contact blocks. Mounted to DIN track, RoHS-compliant relay offers alternative in applications where bulkier contactors have traditionally been used.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Relays

Relay targets high-power electronic applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Apr 2008 07:51:42 -0500

Model 48520, 200 A Electronic Relay protects motors and other loads from damage due to overcurrent and overheating and can be used in severe environments. Fully sealed relay features solid-state design that eliminates contact wear and extends service life to 1,000,000 cycles. It can also be used in hard to access locations and labor-intensive installations.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electronic Relays

Serial Lock-Out Relay provides remote trip and reset.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Apr 2008 07:45:02 -0500

Available in 3, 5, or 8 decks, Series 24 addressable network device delivers trip-coil monitoring, IRIG-B sequence-of-events reporting, system battery monitoring, self-diagnostic reporting, and 2 auxiliary monitoring inputs. Unit frees up RTU points, minimizing point-to-point wiring and facilitating load-shedding. Equipped with manual reset handle for Lock-Out Relay local control, SLOR is rated 30 A/600 V continuous with circuit-breaker coil providing ability of 95 A/125 Vdc.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Relays | Electrical Safety Lockouts

Relay has maximum switching power of 60 W.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Feb 2008 07:43:32 -0500

Series J860 monostable, high dielectric relay with 2.5 kV surge strength conforms to FCC Part 68. Measuring 15.0 x 7.5 x 9.5 mm, relay is DPDT with coil voltage choices of 3, 4.5, 12 and 24 Vdc. Featuring max switching voltage of 250 Vac, 220 Vdc and switching current of 2 A, relay has electrical life at rated load of 100k cycles and mechanical life of 100M cycles (typ).

This story is related to the following:
Communication Systems and Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Frame Relay Switches | Electronic Relays | Miniature Switches

Electronic Timer Relays suit universal applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 22 Feb 2008 07:45:45 -0500

Able to monitor different time functions without using complicated controllers, Electronic Timer Relays can be adjusted to array of timing settings ranging from milliseconds through several days. Colored LEDs report operating status as well as limit value and relay state. ETD devices equipped with special functions, including star/delta or Wye/Delta and watchdog are also available.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electronic Relays | Time Delay Timing Relays

Intrinsically Safe Relays are UL-listed for hazardous areas.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Feb 2008 07:43:19 -0500

Comprised of intrinsically safe control switch input and electromechanical relay output, ISP Series provides safe method to control load with input device located in hazardous area. Products are incapable of releasing sufficient energy to cause accidental ignition of hazardous material by minimizing current level on input side of unit. When control switch in hazardous area is closed, relay is energized. When control switch is opened, relay is de-energized.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Intrinsically Safe Relays

Power Relay features multi-stranded swinger wires.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Feb 2008 07:43:16 -0500

Available in top flange, side flange, and plain case mounting configurations, Model PC740 includes silver alloy contacts and heavy swinger wires that go down to contacts to carry current load and minimize heat in springs. Two-pole version is rated 40 A, 250 Vac, while 3-pole version is rated 30 A, 250 Vac. Measuring 55.2 x 52.0 x 38 mm plus mounting tabs, relay is suited for driving motors and actuators, battery chargers, heater elements, industrial controls, and safety circuits.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Relays