ThomasNet Industrial Newsroom -

Chip Fuse offers current protection up to 25 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Aug 2008 07:56:54 -0500

Featuring 1206 footprint, UST 1206 is suited for applications in which high inrush current and on-off cycling are present. It offers current ratings of 7-25 A, voltage ratings up to 63 Vdc and 32 Vac, breaking capacity of up to 400 A at defined voltage, and operating temperature range of -55 to +90Â°C. UL 248-14 and cURus approved fuse is supplied on tape and reel either with 1, 5, or 15 k pieces. RoHS compliant device has slow-blow characteristic and high melting I2t values.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Current Limiting Fuses | High Voltage Fuses

Surface-Mount Fuse offers operating current surge protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Aug 2008 08:14:39 -0500

Available in current ratings of 15 and 20 A with maximum fault current rating (Interrupt Rating) of 150 A at 24 Vdc, 0501 Series 1206-size surface-mount fuse provides operating current surge protection for high-current voltage regulator modules and dc-to-dc converters. RoHS compliant and UL and CSA approved low resistance device is lead- and halide-free, and can minimize trips during momentary overload conditions.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Surface Mount Fuses

SMT Ceramic Fuse withstands temperatures up to 150Â°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Jul 2008 08:22:37 -0500

Operating in -55 to 150Â°C temperature range and quickly responding to over-currents without tripping, 437 Series surface-mount 1206-size ceramic fuse provides dc circuit protection in wide range of electronic applications. Available in current ratings from 250 mA to 8 A, it provides maximum fault current rating of 50 A and l2t nominal melting rating. RoHS compliant and UL and CSA approved unit is 100% lead- and halide-free.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electric Fuses | Electronic Fuses | Surface Mount Fuses

Fuses are compliant with METI B standard.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jul 2008 07:29:40 -0500

Targeting manufacturers of Japanese white goods, 388 Series of METI B-compliant fuses are designed to provide overall protection for both primary (main power input) and secondary (individual component) protection. Available in both cartridge and pigtailed versions as well as with color-banding and with special/customized formed leads, RoHS-compliant and lead-free fuses feature interrupting capacity of 100 A at 250 Vac, with ratings from 1-30 A.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Cartridge Fuses | Electronic Fuses | High Voltage Fuses | Instrument Fuses

Lead-Free Fuses are suited for electrical ballasts.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Jun 2008 07:40:58 -0500

Available as cartridge or with axial leads, 208 and 209 series of 350 V 2AG-size fuses have interrupt rating of 100 A at 350 Vac. The 208 Series fuses are quick-acting, and the 209 Series fuses are slow-blo type. Sleeves can be added to fuses, and they are offered in various lead forming configurations. Lead-free, RoHS compliant units are environmentally friendly and UR, CE, and PSE approved.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Cartridge Fuses | Electric Fuses

SMT Fuses provide overcurrent protection for PCBs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 20 May 2008 07:31:27 -0500

Measuring 10.1 x 3.12 x 3.12 mm, Series 0443 time-delay fuses are suited for applications with 250 Vac requirement and limited space. They have inrush current withstand (I2t) ratings of up to 127A2s (5A current rating) along with time lag characteristic. Units offer current ratings from 500 mA to 5 A with interrupting rating of 50 A at 250 Vac. Fuses are used by OEMs of products that have ac inputs for LED lighting, notebook PC power adapters, or ac/dc power module.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Circuit Protectors | Surface Mount Fuses | Time Fuses | Delay Fuses

Fuse Kits contain variety of automotive fuse types and sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Apr 2008 07:55:26 -0500

Available in 3 models, Fuse Assortment Kits are packaged in multi-compartment plastic case with close fitting lid to prevent spillage. kits include: 120-piece standard auto fuse assortment (sizes 5-30 A); 120-piece mini auto fuse assortment (sizes 2-30 A); and 56-piece maxi auto fuse assortment (sizes 20-100 A). Each kit includes assortment map for quick identification of components and all fuses are color-coded.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Aircraft & Automotive Fuses | Kits

Fuses offer UL-Listed choices for lower amp applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 12 Feb 2008 07:34:19 -0500

Suited for branch circuit protection, UL-listed Amp-Trap 2000Â® A4BQ 100-600 A Fuses are designed for applications requiring Class L fuse dimensions with ratings under 601 A. Solutions deliver Class J fuse performance, comply with OSHA regulations and NEC standards, and help reduce magnitude and duration of faults for better arc flash mitigation. Fuses ensure flexibility on new construction projects and future expansions.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Fuses

Surface Mount Fuse suits consumer electronics.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Oct 2007 07:58:36 -0500

Providing overcurrent protection in secondary circuits where space is critical, USF 0402 performs Super Quick Acting characteristic at rated current from 0.375-4 A at 32 Vdc and 5 A at 24 Vdc. Unit measures 1.05 x .55 x 0.475 in. and includes gold-plated copper alloy terminals. Applications include battery operated handheld and portable electronic devices such as laptops, cell phones, GPS systems, and PDAs.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Current Limiting Fuses | Surface Mount Fuses

Subminiature 125 V SMT Fuse has current rating above 15 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 14 Sep 2007 07:46:53 -0500

Supplied in 0.397 x 0.123 x 0.123 in. package compatible with pick and place electronics assembly processes, Nano2 456 Series lets circuit engineers design-in primary and secondary over-current protection with single subminiature ceramic fuse. RoHS- and UL-compliant series, available in 20 and 30 A ratings, offers respective interrupting ratings of 100 A @ 125 Vac and 300 A @ 65 Vac. Applications range from PC servers to power supplies, wireless base stations, and storage systems.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Surface Mount Fuses | Subminiature Fuses

Fuse Terminals made 1.55 in. high for use in cabinets.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Jun 2007 07:52:02 -0500

WSI 4 Seies fuse terminals protect power supplies and additional critical loads in electrical cabinets. Low-profile terminal offers 2.5 mmÂ² screw clamping system, accepts standard 5 x 20 mm fuse, and provides blown fuse indication across 10-250 V range. WSI 4 fuse terminals implement short-circuit and overload protection for process and industrial applications. 300 V UL rated terminals can be ganged together, and mount on TS-35 DIN rails.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Terminals | Fuses

Fuse Terminals made 1.55 in. high for use in cabinets.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 26 Jun 2007 07:52:02 -0500

Fuses protect vital electrical components.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 May 2007 07:38:31 -0500

Ranging from 3-40 A, ATOÂ® Fuses protect electrical devices from excess current flow. Internal element is activated by excessive heat, greater than what fuse is rated for, thus melting element and eliminating flow of electricity. End electrical component is then protected from over current state. Once fuse is blown, it must be replaced.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Current Limiting Fuses | Fuses

Fuse Modules suit applications with up to 600 V circuits.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 21 Feb 2007 07:34:40 -0500

Triple-pole, 600 V ULTRASAFE(TM) Fuse Modules feature compact design suited for use with 45 mm-wide IEC contactors. Primarily used to replace circuit breakers in motor starters, each module includes auxiliary contact option and compact busbars for line side terminations. Design facilitates finger-safe fuse changes and features IP20 protection, fuse extraction handles, and optional open fuse indicator lights. Modules can also serve as non-load disconnects.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Fuses

Resettable Fuses protect variety of electronic equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 28 Nov 2006 07:43:26 -0500

Available in radial leaded styles with ratings from 16-240 Vac/Vdc and in industry standard 1812 and 2920 chip sizes, Polymeric Positive Temperature Coefficient Fuses help protect against over-current surges and over-temperature faults by limiting flow of dangerously high current during fault conditions. RoHS-6 compliant units do not require replacement after fault event as they reset themselves, allowing circuit to resume normal operating conditions once power is removed.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Resettable Fuses | High Voltage Fuses

Electronic Fuse suits inrush current limiting applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 May 2006 08:05:54 -0500

Designed for safe insertion and removal of equipment into 12 V backplanes, NIS5112 integrated self-protected, resettable, electronic fuse utilizes high side N-channel FET, driven by internal charge pump. With input voltage range of 9-18 V, device contains circuits to control turn-on voltage, output current, die temperature, turn-on di/dt and turn-on dV/dt, and enable/timer function. Thermal protection circuit is available in 2 thermal limit versions, auto-retry, and latch off.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electronic Fuses

DC Fuses provide protection for ac/dc applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Dec 2005 07:05:20 -0500

UL listed to 600 Vac/dc, LimitronÂ® DCM Fuses feature interrupting ratings of 100,000 A for ac applications and 50,000 A for dc. Developers of solar photovoltaic systems can utilize fuses to comply with NECÂ® 690.9(D) which requires that photovoltaic source circuits utilize overcurrent devices listed for dc circuits and have appropriate voltage and interrupting ratings. Additional applications include traction/mass transit auxiliary circuits and alternative energy sources.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electric Fuses | Current Limiting Fuses

Fuses comply with IEC60269 global standard.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Dec 2005 07:05:20 -0500

Lead- and cadmium-free, dual-indication Series NH fuses meet stringent environmental standards worldwide. They provide visual indication as well as ability to actuate micro-switches for remote indication of operation. Units feature 400 and 500 Vac rated voltages, interrupting rating of 120 kA, operating frequency of 45-62 Hz, and silver-plated full contact blades.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electric Fuses | Current Limiting Fuses

Fuses light up when blown.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 Sep 2005 07:11:07 -0500

Available in ATO and miniature ATM styles, fuses have LED light that facilitates identification of blown units in hard-to-reach panels. Products are color-coded to let user know correct amperage of fuse to replace.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electric Fuses

Thin Film Flat Chip Fuses offer current values to 5.0 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 10 Aug 2005 08:16:32 -0500

Featuring stability verified in accordance with UL 248-14 and IEC 60127-4, MFU 0603/0805/1206 provide secondary overcurrent protection for devices in 0.45 or 0.55 mm high packages. Terminations are pure tin on nickel plating. MFU 0603 and 0805 are rated for 0.5â�"4 A current range and have rated voltage of 32 V, while MFU 1206 has rated current value up to 5.0 A and voltage rating of 63 V. At rated voltages, all devices provide breaking capacity of 50 A.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Fuses