ThomasNet Industrial Newsroom -

Hermetically Sealed Contactor is rated for 100 A at 900 Vdc.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 Oct 2008 07:51:57 -0500

Available in bottom- and side-mount configurations, KILOVAC LEV100 contactor features inert gas in contact chamber and epoxy-sealed resin case. With coil voltage options including 12, 24, and 48 V, contactor's standard coil termination is 15 in. flying leads, and contact configuration is 1 Form X. Designed in accordance with AIAG QS9000 requirements, device is suited for ground power applications in aerospace as well as industrial and commercial power distribution.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Hermetically Sealed Contactors | Aircraft Contactors

Contact suits single and multi-mode fiber applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jan 2008 07:30:41 -0500

With standard 1.25 mm ferrule and sleeve, Size 16 ARINC 801 fiber optic terminus is compatible with LC termination processes. Unit features return loss of -50 dB in single mode and insertion loss of .3 dB max for mated pair. In addition to general use design for tight jacketed cable, contact comes in pull-proof design in which cable jacket is crimped on external body and floating mechanism avoids any loss of performance when pulling on cable.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Cable Terminals | Military Specification Contacts | Connector Contacts | Contact Assemblies

Solid State Contactor accepts 4-20 mA control signal.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 25 Jun 2007 07:46:44 -0500

Able to handle resistive loads up to 25 or 35 A/phase, 3-phase DMA3-6V75T converts analog input into high-speed time proportional output that is compatible with most PLCs or SCADA systems. Switched outputs are zero-crossing solid state back-to-back thyristors to minimize electronic noise. Contactor is suited for applications such as resistive electric heaters, food processing heaters, and heater control on plastics extrusion or blow molding machines.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Solid State Contactors

Definite Purpose Contactors come in multiple configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 22 Mar 2007 07:43:32 -0500

Rated up to 50 A for resistive loads, RoHS-compliant CGDP Series is available in 1-pole, 1-pole plus shunt, 2-pole, and 3-pole configurations. Optional single and dual auxiliary contacts are available for 3-pole contactors, and it is possible to configure 3-pole version as reversing contactor. Features include 24, 120, 208/240, 277, 480, and 575 Vac 50/60 Hz coils. Switching of 20, 25, 30, and 40 A FLA (30, 35, 40, 50 A resistive) loads is possible up to 600 Vac.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Definite Purpose Starters & Contactors | Reversing Contactors

Lighting Contactors are suited for global lighting control.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 Feb 2007 06:50:14 -0500

For global consistency of multi-branch circuit control, Bulletin 500LG(TM) electrically held lighting contactors are designed to meet UL508, cULus, IP1X/IP2X, and CE requirements. Each 30 A, multi-pole control device is RoHS-compliant, accommodates up to 12 poles, and displays important information - contact configuration and position - for each pole. Standard configuration and interchangeable coils lends flexibility for customization of lighting control systems.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Contactors

Contactors meet military and aerospace standards.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Aug 2006 08:08:10 -0500

Suited for weight- and size-sensitive, high-voltage aerospace applications, EPIC(TM) 270 Vdc contactors utilize thin ceramic header welded to can with high-temperature plastics inside for arc management. Seal is sufficient to contain high-pressure gases for optimal switching performance. Rated at 175°C, but tested over 250°C without damage or failure, use of thinner ceramic seal offers more room inside for auxiliary contacts and internally contained coil economizer.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Aircraft Contactors

Semiconductor Switching Devices suit 3-phase applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 May 2006 08:18:56 -0500

Designed specifically for ac applications, semiconductor switching devices have width of 45 mm, and can be used in current range up to 55 A. Contactors are available in 5 versions covering current range from 0-50 A in 10 A steps. With 4-30 V control voltage range, units can be used with both digital and temperature controllers. Devices are available with screw and spring-loaded or ring terminal end connections, and as 2- and 3-phase controlled versions.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Contactors | Switching Relays

IEC Contactors feature ac and dc operating coils.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Jan 2006 07:05:48 -0500

Non-Reversing Series 300 and Reversing Series 310 feature DIN rail and panel mounting, shared accessories, IP20 guarded terminals, and multi-point coils. Non-reversing devices operate from 50-105 Adc, while reversing units operate from 50-80 Adc. Made of non-metallic materials that are asbestos-, halogen-, and cadmium-free, all contactors are environmentally friendly. Units are suited for motor, actuator, solenoid, and other power switching applications.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: IEC Contactors | AC & DC Contactors

Contactor is capable of carrying up to 500 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 29 Jul 2005 08:10:17 -0500

Suited for power switching applications, KILOVAC LEV200 is offered in upright or side-mount attachment styles with hermetically sealed construction. Intrinsically safe product, able to be used in explosive and harsh environments, is rated to continuously carry 500 A @ 320 Vdc when using 400 mcm conductors at 65°C. It employs one Form X (SPST-NO-DM) main contact and can interrupt up to 2,000 A @ 320 Vdc. Contact voltage rating is 12â�"900 Vdc.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Intrinsically Safe Devices or Products | 200 Amp To 6000 Amp Contactors | Hermetically Sealed Contactors

Definite Purpose Contactors carry UL approval.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 30 Jun 2005 08:19:40 -0500

Featuring contact ratings to 600 V, XMC0 Series HVAC/R contactors incorporate heavy-duty silver cadmium oxide contacts, double E magnet assembly, and dust-proof structure. Products feature 155°C, Class F coils, available with variety of voltages at 50/60 Hz. Along with non-position sensitive mounting, contactors offer various terminal options and feature universal mounting plate. Series is available with 1â�"3 poles and 1 pole plus shunt.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Definite Purpose Starters & Contactors

Compact DC Contactors are rated from 30-1,500 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 03 Mar 2004 07:43:16 -0500

Suited for use in severe environment applications, contactors feature standard coil voltages of 12, 24, 30, 48, 60, and 110 Vac. Features include aux switch option and screw terminals or bus bar mounting connections. Current ratings from 30â�"1,500 A make them suited for commercial, industrial, and military applications.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: DC Contactors

Contactors suit constant starting and stopping applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 05 Nov 2003 08:02:48 -0500

Solid State Contactors can turn on industrial motors up to 2 hp, single phase, or up to 5 hp, 3-phase. Maximum Surge Survivalâ"¢ technology and conservative internal SCR design ensure long life when exposed to voltage and amperage surges of motor starting. Clear, finger-safe cover permits additional motor starter MOV to be placed directly across solid state contactor's output, for fourth layer of voltage surge protection.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Solid State Contactors

Contactors/Overloads offer switching currents up to 900 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 21 Oct 2003 08:21:17 -0500

Series CGT relays integrally mount to Series CGC contactors and provide thermal overload protection with Class 10 trip characteristics. Contactors offer selection of coil voltages and come with built-in auxiliary outputs. Series CGD digital motor protection relays provide motor and systems monitoring in panel mountable package with digital display. Available with plastic or metal housing, enclosed starters come with or without start and stop pushbutton.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electronic Switch Contactors | 200 Amp To 6000 Amp Contactors | Overload Relays

Power Controllers work with PLCs, PCs, and SCADA systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Aug 2003 07:53:29 -0500

Solid-state contactors accept 4â�"20 mA signal and convert it into time proportional output. With high-speed cycling capability of twice per second and set-point resolution of 0.5 sinewave, products reduce thermal stress and include finger-safe caged terminals, integral heat sink, and universal mounting bracket for DIN-rail or bolt-on installations. Products are available in single-phase models of up to 25 or 40 A and in 3-phase models up to 25 or 35 A per leg.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Controllers | Solid State Contactors

Solid-State Contactors accept potentiometer input.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Aug 2003 07:53:29 -0500

Power switching products accept 0â�"5 k potentiometer signal and convert it into time proportional output. With cycling capability of twice per second and set-point resolution of 0.5 sinewave, contactors reduce thermal stress and include finger-safe caged terminals, integral heat sink, and universal mounting bracket for DIN-rail or bolt-on installations. Products are available in single-phase models up to 25 or 40 A or three-phase models up to 25 or 35 A per leg.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Controllers | Solid State Contactors

Contactors incorporate electronic coil control design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 05 Mar 2003 07:39:27 -0500

AF Series contactors provide complete coverage of contactor requirements from 9â�"1650 A. All sizes above 50 A feature electronic coil control design and are available in four voltages: 24-60 Vdc, 48-130 Vac/Vdc, 100-250 Vac/Vdc, and 200-500 Vac/Vdc. Product also eliminates contact bounce and chattering to reduce RF interference and power consumption. Contactors rated 400 A and above offer 2 inputs for controlling contactor with low voltage signals.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: AC & DC Contactors

Protective Cover suits NEMA starters and contactors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Feb 2003 07:53:45 -0500

Protective cover helps prevent accidental contact with current-carrying components such as line and load side terminals, coil terminals, and single-block auxiliary contacts. Flexible design allows users to retrofit installed contactors and starters and does not compromise accessibility, allowing users access to terminal screws or lugs for wiring, continuity testing, and maintenance. Installation can occur without removing existing wiring.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Plant Furnishings and Accessories

Search for suppliers of: Motor Starters | Protective Covers | Definite Purpose Starters & Contactors

Control Components suit electrical/dimensional coordination.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Oct 2002 07:54:14 -0500

Available with ratings from 5 through 1,200 A, MCS products include UL-approved molded case and motor protection circuit breakers. Safety contactors are available with ratings from 95 to 860 A in 3 frame sizes. Overload relays include built-in DeviceNet(TM) communication. MCS products also include panel mount, standard bus bar, and ISO(TM) (Isolating) bus bar mounting systems and configuration/design software.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Safety Relays | Contactors

Heavy Duty Contactor fits group lighting applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 18 Apr 2002 07:36:39 -0500

Meter based DURALOAD(TM) provides standard two pole, 100 A per pole control of group lighting. It has NEMA 3R rugged lightweight enclosure and field re-settable circuit breakers. Access below front control panel allows for easy field measurement of load current and voltage. SCADA options for control and monitoring are available.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Lighting Controls | Contactors

Vacuum Contactors are available in large frame models.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Mar 2002 08:10:43 -0500

Sirius 3R contactors include 225, 265, 300, 400 and 500 A devices which perform 2.6 to 3.0 million operations at rated load. They are available with universal current conventional coils (24-600V ac/dc) and electronic coil. Electronic coil comes in 3 options: interface for direct control from 24 Vdc PLC or power supply, Remaining Lifetime to electronically measure contact erosion, and AS-interface module with RLT for communication over AS-interface bus.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: AC & DC Contactors | Vacuum Contactors