ThomasNet Industrial Newsroom - Electrical Equipment & Systems

Panel Interface Connectors include over 30 configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 03 Jul 2009 08:36:49 -0400

ZIPport(TM) panel interface connectors mount on outside of electrical control panel boxes and act as pass-through connections, allowing operator to interface with PLCs and other programmable devices without opening control box. Units include standard reset 3 A circuit breaker and are available with single/duplex/GFCI power outlets as well as no-power option. Designed for frame sizes 6-48, communications connectors available include D-sub, RJ45, RJ12, USB, Ethernet, and Data Highway.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Computer Hardware and Peripherals
Test and Measuring Instruments
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electronic Connectors | Interface Modules | Communication & Connectivity Devices

Heavy Duty XLR Cable Connector is designed for outdoor use.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 02 Jul 2009 08:39:04 -0400

Dust and water protected, IP67 rated XX-HD Series includes 3-pole female XLR connector (NC3FXX-HD-D) with optional black housing (NC3FXX-HD-B-D) as well as 3-pole male XLR connector (NC3MXX-HD-D) with optional black housing (NC3MXX-HD-B-D). Rubber sealing jacket protects against mechanical shock, while chuck type strain relief system helps in secure clamping of cables. Product features rugged zinc die cast shell and gold contacts.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Cable Connectors | Harsh Environment Connectors | Waterproof Connectors

Sealed Tactile Switch features radial leads.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 02 Jul 2009 08:39:03 -0400

Sealed to IP67 for protection from dust and water immersion, TL52 series tactile switch has mechanical life of 100,000 cycles, min. It has contact rating of 50 mA at 12 Vdc, contact resistance of 100 mW (initial max), insulation resistance of 100 MW (min at 100 Vdc), and dielectric strength of 250 Vac. With operating temperature between -25°C and +85°C, product has force of 260 ±50 gf and 160 ±50 gf, and travel distance of 0.3 +0.2/-0.1 mm.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Tact Switches | Watertight Switches | Sealed Switches

DC/DC Converters (1 W) are built for reliability.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Jul 2009 08:34:15 -0400

Offering MTBF of 3.5 million hr, M1WB series feature 1 kVdc of isolation and fixed input with unregulated outputs. They come in SIP, DIP, and SMD packages with industry standard pinouts and operate over -40 to +85°C range. Delivering efficiencies up to 81%, RoHS-compliant products do not require any heat sink or external components. They are designed for applications where single power supply is isolated from input power supply in distributed power supply system on circuit board.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: DC To DC Converters

Cable Ties are hand safe and snag proof.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:35:03 -0400

Low Profile Cable Ties feature low head height and, when cut, stub is concealed within head to create smooth, snag-proof outer surface that conforms to bundle. They are available in UV-resistant black and natural nylon, and can be installed using industry standard tools. UL/CSA listed, QPL approved, ties come in 7-16 in. sizes in medium and heavy duty styles, and are suited for wire harnesses and bundling of tubing and hoses.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Low Profile Cable Ties

Hermetically-Sealed Connector has lightweight aluminum shell.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:35:01 -0400

Designed for low-pressure water immersion or fording applications, KJAYA Series provides hermetic sealing of 0.01 micron cu-ft/hr for pressure differentials of 15 psi. It is available in sizes 9-25 in wall and jam-nut mounting receptacles and is water immersion sealed to 10-7 cm³/sec. Meeting all MIL-STD-810 and IP67 water immersion requirements, connector is suited for variety of applications including integrated avionics, radar, electronic warfare systems.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Hermetically Sealed Connectors | Military Specification Connectors | Waterproof Connectors

Bright Light Fixture allows expanded incubator applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:35:00 -0400

Optimized for light transmission with minimal heat generation, expandable and waterproof gLux(TM) features modular and adjustable light banks that let users fill incubator with general or direct lighting of various intensities. This energy-efficient, high-output lighting system comes standard in 10 and 25 ft³ Diurnal Incubators or is available as accessory for all other 10 and 25 ft³ products as accessory number LGHT301 or LGHT303.

This story is related to the following:
Laboratory and Research Supplies and Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Laboratory, Culture, Bacteriological & Carbon Dioxide Incubators | Lighting Fixtures

Image Module Switch is designed for portable devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:35:00 -0400

Suited for dual camera applications, FSA1211 is 12-port, SPST analog switch that isolates high speed bus from parasitic components to maintain signal integrity. It has bandwidth of 720 MHz, high ESD of 5.5 kV, and offers optimal way to isolate capacitance and maintain signal integrity for high speed data paths. When isolating unused parallel interface, switch reduces radiated EMI of path, improving RF desense.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Isolation Switches | Analog Switches | Single Pole, Single Throw (SPST) Switches

Rocker Switch features addressable architecture.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:34:59 -0400

Offering look and feel of electromechanical control coupled with built-in PCB, N-Series produces up to 144 individual switch IDs by using resistive ladder circuit and enables individual loads to be assigned to specific functions. Application software determines which load is being controlled as well as selected actuator position. While simplifying wiring harnesses, switch also enables specific loads to be controlled from any location within vehicle cab.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Rocker Switches | Illuminated, Lighted or Backlit Switches

RF Switches operate in 6 GHz frequency band.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 29 Jun 2009 08:33:51 -0400

Utilizing Gallium Arsenide (GaAs) pseudomorphic high electron mobility transistor (pHEMT) technology, symmetric SPDT switches operate in multiple market segments, including cellular infrastructure, WiFi, WiMAX, and antenna tuning applications for mobile devices. Models RF3021 and RF3025 are housed in 16-pin 3 x 3 mm QFN package and feature high isolation and single-bit control. Offered in 6-lead SC70 package, RF3023 and RF3024 feature low insertion loss and moderate isolation.

This story is related to the following:
Communication Systems and Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Broadband Switches | Isolation Switches | RF Switches | Single Pole, Double Throw (SPDT) Switches

Preterminated Optical Cabling facilitates fast deployment.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 29 Jun 2009 08:33:49 -0400

Designed for data centers, high-density LANscape® Pretium® Evolved-Density, Growth-Enabled (EDGE) solutions feature preterminated multi-fiber assemblies, or trunks, with minimum bend radius as small as 5 times OD of cable. Cable can be tightly routed around corners and bends, and extra slack can be coiled without causing attenuation. Interconnect cables offer bend radius of up to 8 times OD, while housings are available in 1U and 4U sizes and mount in 19 in. racks or cabinets.

This story is related to the following:
Optics and Photonics
Communication Systems and Equipment
Computer Hardware and Peripherals
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Fiber Optic Cable Assemblies | Fiber Optic Cables | Data & Telecommunications Cable Assemblies | Data Cables | Cabling Systems

LED Driver enables dual LED operation for camera flash.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 29 Jun 2009 08:33:46 -0400

Housed in 16-pin micro SMD package, PowerWise® LM3554 drives 1 or 2 high-current LEDs for flash applications in handheld devices. Fixed-frequency, step-up DC-DC converter with 2 regulated current sources is capable of driving loads up to 1.2 A from single-cell Li-Ion battery. Device drives LEDs in high-power flash mode for still photography or low-power torch mode for video conferencing. To configure driver, designers adjust flash current levels and timer durations via I2C compatible interface.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Integrated Circuits (IC) | DC To DC Converters | LED Drivers

Low-Profile POL Converters offer output voltage tracking.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 29 Jun 2009 08:33:45 -0400

Supplied in 0.657 x 0.402 x 0.134 or 0.173 in. RoHS-compliant package, FPDK12SR8003PSS, FPDK12SR8004PSS, and FPDK12SR8006PSS are non-isolated point-of-load (POL) DC-DC converters that respectively deliver up to 3, 4, or 6 A output current. Power densities reach 860 W/in.³, with efficiencies to 93%. SMT devices operate from 5.6-14.0 Vdc input bus with programmable output voltage of 0.8-6.6 Vdc and provide complete power conversion solutions without external input and output capacitors.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: DC To DC Converters

DC/DC Converters are designed for 48 V telecom equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:11 -0400

Delivering up to 50 W of power, PQ60xxxEKA series comprises of 7 output voltages including 1.5, 1.8, 2.5, 3.3, 5, 12, and 15 V. It has wide input voltage range of 35-75 V, basic 2,000 Vdc input to output isolation level, and can withstand input transients up to 100 V for 100 msec. Operating at -40 to +100°C, RoHS 6/6 compliant unit features input under-voltage lockout and over-voltage shutdown, output OVP, current limit, as well as short circuit and thermal shutdown protection.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: DC To DC Converters

High-Voltage DC/DC Power Supplies feature compact footprint.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:11 -0400

With volume of 0.84 and 1.045 in³ respectively, "V" and "M" Series offer low ripple, tight tolerances, self-restoring output voltage, voltage monitors, and arc and continuous short-circuit protection. Output voltages range from 0-600 through 0-1,500 V, at up to 1 W output power, with output current ranges from 300 µA to 1 mA. Power supplies are suited for applications requiring bias voltage, such as avalanche photo diodes (APD) and photomultiplier tubes (PMT).

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: DC To DC Power Supplies | High Voltage Power Supplies

Heavy Duty Power Relays are UL/CUL listed and RoHS compliant.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:10 -0400

Rated to operate in ambient temperatures as high as 115°C, AZPRD Series of high voltage power relays have expected life of 100,000 operations at rated load. They are available with both AC and DC coils with molded Class F construction, SPDT, SPST, DPST and DPDT contact arrangements. Suitable applications include controls for motors, pumps, compressors, blowers, lights, heaters and fans.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Control Relays | High Temperature Relays | High Voltage Relays | Heavy Duty Relays | Power Relays

Feed-through Panel Connector measures 7/8 in. size.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:10 -0400

Used with power supply networks, Series 820 threaded-locking feed-through connector connects male and female cable connectors between cabinet and industrial environments. It is available with 5 gold-plated contacts and has rated current of up to 8 A per contact. Each connector is constructed with nickel-plated brass housing and M25x1.5 fixing thread. Unit is IP67-rated protecting from ingress of debris and liquids.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electric Connectors | Electrical Feedthroughs

Flyback Controller operates at junction temperature of 150°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:08 -0400

Available in 6-pin ThinSOT(TM) package, H-grade version of LTC3803-3 current mode flyback DC/DC controller can be powered by input ranging from 9-75 V. Unit maintains 300 kHz operating frequency and offers adjustable slope compensation for optimized transient response with minimum output capacitance, and soft-start function that minimizes inrush current/output voltage overshoot. Operating in -40 to +150°C temperatures, IC features 40 µA start-up and 240 µA quiescent current.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Controls and Controllers

Search for suppliers of: Voltage Controls | Integrated Circuits (IC) | DC To DC Converters | Current Controls

TRIACs achieve motor control at 150°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:05 -0400

Specified for operation up to 150°C without derating, 4 A Model T410H, 6 A Model T610H, 8 A Model T810H, and 10 A Model T1010H feature low gate current of 10 mA, which allows direct logic-level switching. Units maintain specified minimal commutation and 75 V/µs noise immunity. Rated up to 600 V, TRIACs are suited for control of AC loads such as electric heaters, inductive heating equipment, medium-power motors, and other small appliances.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: TRIACS | Electric Switches

Patch Cords uitilize PCB-based Smart-Plug technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:00 -0400

Available in both UTP and shielded configurations, 6 A Z-MAX Patch Cords feature RJ-45 Smart-Plug design, which integrates PCB into every plug, offering signal tuning capabilities. Zero-Cross(TM) termination method eliminates split pair, pair-crossing, and pair untwisting. To maintain pair twist to point of contact, cable conductors are terminated to IDC contacts at rear of plug. Double-ended stranded patch cords and single and double-ended solid cords are available.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Electric Cords