ThomasNet Industrial Newsroom -

Adhesives and Sealants are suited for fuel cell assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Jul 2008 08:01:09 -0500

Structural adhesives for metal/plastic bonding, threadlockers, thread sealants, seam sealants, and general-purpose adhesives are designed for micro- to large-size, stationary or portable fuel cell applications. Resistant to acids, coolants, and chemicals, these products are formulated to deliver gas-tight seal on components and stacks. Membrane electrode assembly (MEA) adhesives and sealants bond bipolar plates, seal MEAs, and seal between bipolar plates and end plates.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Thread Sealants | Adhesive Sealants | Structural Adhesives | Threadlockers

Ceramic Adhesive withstands up to 2,500°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:29 -0500

Ceramabond(TM) 685N is single part, dispensable, zirconium silicate based adhesive and sealant system that is used to bond ceramic honeycombs to metal frames used in construction of gas-fired ceramic radiant heaters. Thixotropic, water-dispersible, and fast-setting paste contains no asbestos or VOCs, and exhibits tensile-shear strength of 500 psi and linear shrinkage of less than 2% after curing. It is available in pint, quart, gallon, and 5 gal pails.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Adhesive Sealants | Metal Bonding Adhesives | Ceramic Adhesives | High Temperature Adhesives | Bonding Compounds

Metal Coating suits UV curing and printing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:56 -0500

Designed to maximize curing wavelengths between 220-400 nm and minimize rest of visible and IR spectrum from 450-2200 nm, UV Spectral Metal features MicroDyn® sputtering technology and is used as reflector behind curing lamp. Stable over temperature/humidity changes, it is coated onto highly polished, standard size aluminum sheets. With ability to customize/fabricate products after coating, long trough reflectors for inline exposure systems can be created using multiple lengths of product.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Dichroic Coatings | Metal Coatings | Ultraviolet (UV) Coatings

Unified Coating suits surface preparation applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:23 -0500

Designed to replace phosphatizing and chromating systems, VpCI(TM)-440 protects multi-metal substrates from corrosion while preparing metals for surface bonding and coating. Non-toxic, non-hazardous, water-based coating can be applied with conventional equipment such as sprayers, dipping tanks, steam cleaners, and power washers. Self-preserving product is environmentally safe and does not require use of biocides.

This story is related to the following:
Materials and Material Processing
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Corrosion Inhibitors | Water Based Coatings | Metal Surface Coatings

Epoxy Sealer penetrates deep to protect concrete, masonry,

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 May 2008 07:37:10 -0500

Featuring water-thin viscosity, Floor-Nu® Penetrating Sealer penetrates as deep as ¼ in. into pores of concrete or masonry surfaces in order to protect against effects of moisture, freeze/thaw cycles, salts, oils, and specific chemicals. This 2-component (1A:1B) clear epoxy, which can also be used on insulation and wood or concrete floors, locks in loose aggregate on surface and forms hard, impenetrable sub-surface. Coating contains 48% solids by volume.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Epoxy Sealants | Protectants | Cement & Concrete Coatings

Epoxy Adhesive is suited for cryogenic applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:41 -0500

With mix ratio of 100:65 by weight, EP29LPSP can withstand temperatures to 4 K, and resist cryogenic shocks (room temperature down to liquid helium temperatures in 5-10 min time period). It cures at room temperatures, and can be heat cured at 130-165°F for 6-8 hr. Chemical resistant adhesive features mixed viscosity of 400 cps, tensile strength of 6,500 psi, tensile modulus of greater than 375,000 psi, volume resistivity greater than 1,015 <font face='Symbol'>W</font> cm, and Shore D hardness of 80.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Adhesive Sealants | Epoxy Sealants | Epoxy Adhesives

Elastic Adhesives/Sealants perform flexible metal bonding.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Apr 2008 07:44:27 -0500

Compatible with various paint systems, Terostat® 7100(TM) Adhesive/Sealant and Terostat 7700(TM) Adhesive are primerless, permanently elastic formulations used to bond and seal dissimilar substrates. Both one-component, odorless adhesives are non-corrosive and free of solvents, isocyanates, silicones, and PVC. They resist aging and weathering, cure by reacting with ambient moisture, and achieve functional strength in 24 hr.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Sealants | Metal Bonding Adhesives | Elastic Adhesives

Two-Component Cartridges meet construction industry needs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 29 Apr 2008 07:29:22 -0500

Available in volumes from 75-1,500 mL with ratios of 1:1, 2:1, and 10:1, cartridges are offered in polypropylene and nylon to meet requirements of chemistries used in construction industry applications. Peeler Cartridge lets users package 2-component material in one cartridge that fits standard caulking guns. Also available, static mixer models range from traditional helical style to square Quadro design. Disposable static mixers are also available.

This story is related to the following:
Material Handling and Storage
Mechanical Components and Assemblies
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Adhesives Dispensers | Two Part Sealant Cartridges | Caulking Compound Cartridges | Cartridges

Epoxy Flux can be used for advanced package configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Apr 2008 07:37:41 -0500

Reflow curable encapsulant material, Hysol® FF6000(TM), combines flux functionality and underfill protection into one solution. It is formulated to provide flux for lead-free solder joint formation and, when cured, delivers protection against mechanical stress. In-line approach eliminates neeed for dispensing equipment as well as time required for underfill application and cure. Areas of use include Package-on-Package device configurattions and/or large (23 x 23 mm or up) BGAs and CSPs.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Epoxy Fluxes | Reflow Encapsulants

Film had strong adhesive for PCR sealing and storage.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Apr 2008 07:34:08 -0500

Able to withstand temperature from -40 to +125°C, ThermaSeal A(TM) Sealing Film incorporates thick adhesive layer for secure sealing of microplates in PCR and storage applications, such as reagent-handling. Shaped to fit within rim of raised-rim plates for sealing of all wells, polypropylene film can also be used for sealing standard microplates. Each film has 2 removable end tabs that aid in positioning film to plate.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Adhesive Film | Polypropylene Film | Adhesive Sealants

Teflon Tape features adhesive on both sides.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 18 Mar 2008 07:34:24 -0500

Available from .005-.060 in. thick, Double-Sided Teflon® Tape allows customers to fasten 2 substrates together, eliminating need for rivets, bolts, and screws. PTFE substrate provides non-porous barrier and is resistant to chemicals and extreme temperatures. Tape is sold in rolls, sheets, or custom die-cut shapes.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Teflon Tapes | PTFE Tapes | Double-Faced Tapes | Adhesive Tapes

Joint Sealant suits interior and exterior concrete floors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 18 Mar 2008 07:34:16 -0500

Intended for applications requiring high elongation, CHEMTHANE 1350 aliphatic polyurethane concrete joint-filling compound withstands moisture, mildly acidic environments, and mildly alkaline environments. Two-component, zero-VOC product is corrosion-resistant, UV stable, and will protect against freeze thaw dynamics. Possible applications include aircraft hangars, factories, retail stores, and warehousing facilities.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Construction Equipment and Supplies
Materials and Material Processing

Search for suppliers of: Polyurethane Sealants | Joint Sealants | Cement & Concrete Sealants | Asphalt & Concrete Joint Sealants | Joint Sealing Compounds | Corrosion Resistant Compounds

Solvent-Based Sealant cures in 30 minutes.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Feb 2008 07:56:09 -0500

Formulated for use on FPR, epoxy, and composite mold surfaces, Frekote® FMS-100(TM) solvent-based sealer is used to seal new molds and repair microporosity in older molds. High performance sealant is hand-applied in thin, even coat at room temperature. Available in 1 pint and 1 and 5 gal containers, it contains no CFCs and is shelf-stable for 12 months from date of manufacture.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Epoxy Sealants | Adhesive Sealants | Sealers

Solvent-Free Sealant creates smooth concrete surface.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 04 Feb 2008 07:57:23 -0500

Used as base resin in solvent-free sealant, Desmoseal® S XP 2636 silane-terminated polyurethane prepolymer eliminates bugholes in concrete surfaces. Product cures with moisture from air, or from substrate to which it is applied. Finished product will not foam in presence of water, and provides optimal UV stability as well as adhesion to concrete. Sealant can be used on any concrete surface that has been poured into mold including concrete basement and retaining walls.

This story is related to the following:
Materials and Material Processing
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Prepolymers | Cement & Concrete Sealants

Boron Nitride Coating handles temperatures up to 1,560°F

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jan 2008 07:31:39 -0500

Pyro-Paint(TM) 634-BNSC is single part, odorless, water-dispersible coating formulated to resist molten metals, glasses, plastics, and salts as well as non-ferrous metals such as molten aluminum and magnesium. It provides highly lubricious and chemically resistant interface between molten material and underlying refractory structure. Applied with brush, roller, or spray equipment, coating dries at room temperature in 1-2 hr and cures fully in 1-2 hr at 200°F.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Water Based Coatings | Refractory Coatings | Protective Coatings | Metal Coatings | High Temperature Coatings

Iron Phosphate Coating works at low spray temperatures.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jan 2008 07:15:47 -0500

Providing iron phosphate coating for ferrous metals, Chem Cote 3010 works at temperatures below 90°F, eliminating use of any burner. It is pre-paint treatment for iron and steel that makes resulting surface highly resistant to corrosion.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Materials and Material Processing
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Rust Preventives | Corrosion Inhibitors | Permanent Protective Coatings | Phosphate Coatings | Metal Coatings

Zinc Coating provides corrosion protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Dec 2007 07:42:26 -0500

Made of 95% zinc, 1st Zinc is used on metal parts and assemblies as either protective primer coat to be later topcoated or as standalone coating. Formula provides corrosion protection in cold-galvanizing applications and meets requirements listed in ASTM-780, ASTM-D-520, Fed Spec DOD-P-21035A, MIL-P-26915A, and SSPC-Paint 20 specifications. Product is available in aerosol cans and bulk gallons.

This story is related to the following:
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Zinc Coatings | Metal Coatings | Corrosion Resistant Coatings

Wood Sealant offers water repellency and UV protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Nov 2007 07:43:25 -0500

SCS-100 Wood Deck Sealer features water preventative technology utilizing nanoparticulate that does not allow moisture to hold wet edge. Resin can be applied to wet and dry substrate and is able to penetrate and chemically bond to organic and inorganic materials, building durable, breathable film. Compliant with VOC requirements under Consumer Products regulations in all 50 states, it is available in natural and tan flat finish with coverage up to 200-400 sq ft/gal.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Wood Sealers | Volatile Organic Compound (VOC) Compliant Sealants

Polyurethane Sealant bonds to most building materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Nov 2007 07:45:34 -0500

White Lightning® Polyurethane Sealant is mildew- and rust-resistant and withstands up to 50% joint movement. It is suited for interior and exterior projects and does not require mixing. Available in smooth and textured finishes, CARB-compliant sealant meets requirements of TT-S-00230 C (Type II) Class A, Non-sag, One-component and ASTM C-920 Type S, Grade NS, Class 25, Use-NT, Use-A, Use-M, Use-G, and Use-O.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Polyurethane Sealants

Protective Perimeter hinders cutting of smart devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 15 Nov 2007 07:49:12 -0500

ProTeCut(TM) provides protective perimeter for components in order to make smart devices difficult to cut without professional tools. Utilizing Reaction Injection Embedding®, this cut-resistant technology delivers component protection and can be integrated into active RFID and smart card platform designs. Solution also lets consumers cut through their cards safely by protecting select components.

This story is related to the following:
Packaging Products & Equipment
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Protective Finishes