ThomasNet Industrial Newsroom -

Hydraulic Valve Controller suits off-highway equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 May 2008 07:40:33 -0500

Featuring 32-bit microprocessor technology, AX021600 Single CAN Controller includes one universal signal input, one software-controlled output up to 2 A, and one CAN port. PCB is enclosed in heat shrink wrap with 6 in. lead wires terminated in 3 Deutsch IPD DT06 plugs for installation in-line with wire harness. Operating from 6-60 Vdc, controller accepts sensor, joystick, frequency, or other input and applies software-based algorithms for complex or simple control functions.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Valve Controls

Digital Valve Controller is SIL 3 certified.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 20 Mar 2008 08:19:48 -0500

Designed for Safety Instrumented Systems (SIS), FisherÂ® FIELDVUEÂ® DVC6000 digital valve controller features manual reset, stored safety demand event log, pass/fail status after partial stroke test, and third party certification to SIL3, SIF loop. It operates by input signal of 0-24 Vdc, 0-20 or 4-20 mA, and meets IEC61508 requirements. Controller is also available in stainless steel for harsh offshore environments.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Valve Controls | Digital Controls

Valve Driver has CAN input and 9 current outputs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Feb 2008 07:36:48 -0500

Model AX021200 valve driver controller drives multiple 12 or 24 V proportional valves while operating at up to 72 Vdc for machine control in harsh environments. Along with rugged IP67 packaging and connectors, it features CANopen or J1939 input, 9 proportional outputs (2 A) up to 6 A max, and operates off 8-80 Vdc input. Embedded software allows user configurable set points, and AX021200 allows PC-based configuration using Axiomatic Electronic Assistant and USB-CAN converter.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Valve Controls

Gear Operators feature self-lubricated design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jan 2008 07:30:47 -0500

Offering weatherproof construction with cast iron body and O-ring seals, Series MGO provides on-off or throttling service for valves or dampers, including BFV Series butterfly valves ranging from 2Â½-12Â½ in. Self-locking worm and worm gear holds valve in desired position. In addition, operators include hand wheel, valve position indicator, and mechanical travel stops that permit field adjustment of valve movement to specific degrees of rotation.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Valve Operators

Control Monitor reports pressure conditions of valves.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Nov 2007 07:54:09 -0500

Able to create dynamic baseline signature, Westlock XRÂ® Linear/Rotary Control Monitor conveys critical information to process managers. Stand-alone field device features non-contact sensor for positioning and fully encapsulated electronics modules for detailed performance information. Calibrated, commissioned, interrogated, and maintained via XRa software, monitor provides comparison graphs in real-time via network, local RS232 port, or wireless communication.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Wireless Monitoring Systems | Remote Monitoring Systems | Valve Controls

Valve Driver offers 160 Âµsec valve open time.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 04 Apr 2007 08:03:52 -0500

Capable of synchronizing gas flow with pulsing lasers, Iota One precision valve driver system offers pulse duration ranges in Âµsec, msec, or longer with internally-generated pulse trains achieved by setting on/off times or operating frequency. Self-contained, rack-mountable system includes front panel BNC jacks for both I/O TTL signals. Single- and multi-channel units produce repetition rates up to 250 (maximum 50% duty cycle) and 999 Hz, respectively.

This story is related to the following:
Controls and Controllers
Mechanical Components and Assemblies

Search for suppliers of: Valve Controls | Valve Components & Parts

Thermoplastic Gear Operator withstands severe chemicals.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 Nov 2006 07:48:05 -0500

Constructed of composite plastic with black urethane coating, Plasgear will not corrode or rust from exposure to harsh chemicals. Submersible unit features visible PP position indicator, NAMUR mounting dimension that allows for mounting accessories, plastic PPG reinforced hand wheel, and adjustable travel stop for open and close position. Available in sizes from 1Â½-14 in., Plasgear is standard on Type 57 Butterfly Valves or can be supplied without valve.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Gearboxes | Valve Operators

Valve Module offers independent intelligent control.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Jun 2006 08:06:55 -0500

Incorporating 2 pneumatic valves and Independent Intelligent Control(TM) into single module, Dual-Zone GEN2(TM) System is intended for pneumatically powered accumulation conveyors, as well as sequential and proportional control applications. Instead of central computer or PLC, module contains its own programmed logic to control both valves independently. It communicates directly with other modules, and makes independent decisions based on individual program instructions.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Pneumatic Controls | Valve Controls

Valve-Control Modules replace analog electronics.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 15 Jun 2006 07:56:54 -0500

Snapped onto DIN rail, Digital Modules for electrohydraulic proportional valves can be configured to function in same way as various individual analog cards. While 3 modules include drivers for directional (PWD00A-400), throttle (PCD00A-400), and pressure control valves (PWDXXA-400), fourth module replaces accessory cards (PZD00A-400). Each unit, configured over RS232 null-modem cable via Parker ProPXD software, accepts download of user-defined custom settings.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Control Valves | Valve Controls

Gas Shutoff System features fail-safe shutoff valve.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 May 2006 08:02:02 -0500

Hexacon(TM) Model II control system closes up to 6 Eclipse(TM) actuators on toxic gas cylinder and ton container valves when activated by panic buttons or remote gas sensors. Model II computer system applies 30 lb-ft of torque for test closures and 50 lb-ft of torque for emergency closures of cylinder valve. SCADA systems can be provided with actuator closure status and error codes to analyze problems and take appropriate corrective action.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Controls | Gas Shut-Off Valves

Valve Control Module features lift-off design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Mar 2006 07:06:04 -0500

With screw-on acrylic top and stainless steel base, 2-piece valve control module for W-Series Single and Double Seat Valves has 3 set-screws that secure it to actuator. It accommodates current switch options including Set & Forget switch that provides up to 3 24 Vdc outputs, as well as As-I, and DeviceNET. Available with up to 3 solenoids, extra solenoids can be used to power nearby valves. Seat wear option is available for single-seat valves.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Valve Controls

Bevel Gear Operators suit power industry valve applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 10 Oct 2005 07:11:50 -0500

Designed to handle seating and unseating force of high-pressure gate and globe valves found in power plants, MT Series is available in torque ranges to 8,000 lb-ft and thrust ranges to 325,000 lb. With ductile iron bevel gears and thrust base housings, units withstand elevated process temperatures. Operator stem nut is shouldered in drive sleeve to capture thrust forces within thrust housing without transferring forces to torque housing.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Valve Operators

Dispensing Valve Controller helps eliminate dripping.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 17 May 2005 07:51:48 -0500

Model VC-1195A can control both ON and OFF action of 1 or 2 dispensing valves. By using air to open and close valve, unit maximizes valve suck-back action and minimizes material stringing problems.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Controls | Dispensing Valves

Hydraulic Components suit mobile machinery.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Apr 2005 07:49:52 -0500

With displacements of 147 and 165 cc/rev, Series H1 servo-controlled, hydrostatic pumps are available with electronic sensors to track speed, temperature, angle, and pressure. Electrohydraulic proportional valves, Series PVG 100 offers working pressures to 5076 psi, and provides equitable flow under all load and supply conditions. Using DSP technology and CAN communication, PLUS 1â"¢ communications network provides connectivity and enables users to customize mobile machinery control.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Hydrostatic Test Pumps | Hydraulic Pumps | Electrohydraulic Valve Controls | Proportional Valves

Directional Control Valve incorporates on-board electronics.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Feb 2005 08:30:11 -0500

Model 4DP03-3B is rated at 100, 200, or 300 l/min flow rates with 5 bar-per-spool-edge pressure drop, or 500 l/min in double path configuration. It conforms to ISO 4401-07-06-0, CETOP 7, and NFPA 7 standards. Standard M12 connector socket with O-ring seal is supplied for interface connection, providing ramps adjustable up to 10 sec, and 10 V reference voltage for external potentiometer. Optional second connector is available to accept ramp on/off and emergency stop inputs.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Controls | Control Valves | Directional Control Valves

Control Valve conforms to ANSI B 16.34 and ASME VIII.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 Dec 2004 08:11:28 -0500

Available in sizes from 1â�"8 in., C Series control valves offer pressure ratings conforming to ANSI 300 and ANSI 600, and come in carbon steel, alloy steel, or stainless steel body materials. Cage-guided balanced plug provides control over high differential pressures, and 1-, 2- and 3-stage designs are offered to minimize cavitation and aerodynamic noise. Modular structure enables single valve envelope to address variety of control applications.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Valve Controls | Control Valves

Control Valve System suits gas flow operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Jul 2004 07:43:02 -0500

GVP-100 all electric cage-guide control valve system suits low-power gas flow applications such as remote monitoring in gas production fields. System operates on solar panel and 12 Vdc battery system with digital actuator that employs gear-reduced, low-power brushless motor to minimize power requirements. DSP-based digital driver provides self-diagnostics, remote monitoring, and configuration, and valve design minimizes flow restriction for maximum capacity.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Valve Controls | Control Systems

Digital Controller allows precise spray valve control.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jun 2004 00:00:00 -0500

Programmable Model SVC100 supplies both operating air and atomizing air to spray valve. Transfer efficiency is maintained by built-in operating air pressure regulator. Adjustable atomizing air creates pressure into spray valve's air cap, atomizing material. Three separate time intervals, including pre-spray, spray, and post-spray time can be set, ensuring that consistent and repeatable area is covered and maintained throughout coating operation.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Valve Controls | Programmable Controllers

Piston Air Operators can be controlled 3 ways.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 16 Mar 2004 07:39:51 -0500

Hippo Piston Air Operators, available in NO and NC configurations, provide remote automatic on/off operation of valves with max operating pressure of 60,000 psi. Controlled via air regulator, electric solenoid, or manual low-pressure valve, both configurations have 1/8 in. NPT air inlet. Spring to open/air to close service requires air pressure from 30â�"100 psi, while air to open/spring to close service requires air pressure from 35â�"120 psi.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Pistons | Valve Operators

Valve Controller offers performance diagnostics.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Nov 2003 08:45:50 -0500

FisherÂ® FIELDVUEÂ® Digital Valve Controller provides green-yellow-red indication of operating status and recommended course of action. Using AMS Device Manager software with ValveLinkÂ® SNAP-ONâ"¢ application, controller detects emerging conditions at valve that could lead to failure. It analyzes and trends diagnostic data while valve is in service without impacting process. It detects 200+ fault conditions and documents results in preformatted Microsoft WordÂ® format.

This story is related to the following:
Controls and Controllers