ThomasNet Industrial Newsroom -

Filters and Regulators conform to non-grease specifications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Apr 2008 07:45:04 -0500

Able to filter to 5 microns with operating pressure range from -14.5 to 145 psig, FN 100 air filter can be used for both pressure and vacuum applications, while VFN 100 is suited for vacuum and vacuum breaking applications. Available in side piping and bottom piping, regulators offer 0.7 and 0.25 Mpa pressure options and choice or relief or non-relief options. Integral filter/regulator unit is available in side piping, with choice of 2 pressure ranges and relief or non-relief options.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC
Material Handling and Storage

Search for suppliers of: Air Filters | Air Pressure Regulators

Pressure Regulators control compressed air and gas.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Apr 2008 07:55:20 -0500

Offered in 4 models, electronically-controlled Proportional Pressure Regulating Valves feature connectors ranging from G1/4 to G2 for compressed air and gas volume flow rates of 2500 l/min to more than 40,000 l/min. Self-regulating seal between pilot chamber and pressure release prevents components from sticking and avoids jerky valve movements. Rated at IP65, airfit control pressure regulators are controlled via SPS or potentiometer with either 0-10 V, 0-20 mA, or 4-20 mA.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Proportional Valves | Pressure Regulators | Pressure Control, Reducing, Regulating & Relief Valves

Air Filter Regulator withstands salt water environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Feb 2008 07:37:27 -0500

Built to resist corrosion, Type-300 Gulf Buster Filter Regulator features aluminum body, stainless steel trim and internals, as well as all-stainless steel external hardware. It provides constant control under variable flow rates and supply pressures, while aspirator design helps maintain set pressure at higher flow levels. Designed to provide instrument-quality air to range of pneumatic tools and control systems, solution offers 0-30, 0-60, and 0-100 psig output ranges.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage

Search for suppliers of: Pneumatic Regulators | Air Pressure Regulators

Constant Pressure Valves eliminate pump cycling.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Feb 2008 07:53:31 -0500

Designed to regulate downstream pressure, Cycle Gard® Constant Pressure Pump Control Valves provide constant pressure until demand in system is no longer required. They feature hydraulically operated valve requiring no electricity and help eliminate effect of water hammer. Depending on valve model, integral/external low flow by-pass allows system pressure to slowly rise under low demand and fill tank or reservoir until pressure switch setting is reached, shutting pump off.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Controls and Controllers

Search for suppliers of: Pump Control Valves | Flow Control Hydraulic Valves | Pressure Control, Reducing, Regulating & Relief Valves

Pressure Regulators feature 2-stage design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 Jan 2008 07:30:47 -0500

Equipped with 2¾ in. diameter stainless steel diaphragm, Ultra Low Delivery Pressure Regulators provide pressure control from 0.2-2 psig. Two-stage design delivers constant outlet pressure regardless of changes in cylinder pressures. Offered in chrome-plated brass or Type 316 SS, regulators are suited for low-pressure control of pure, inert, and mildly corrosive gases used with calibration and other analyzer processes.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Stainless Steel Pressure Regulators

Filters, Regulators, Lubricators feature modular design.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jan 2008 07:28:14 -0500

Airware(TM) Filters, Regulators, and Lubricators (FRL) are available in Miniature, Compact, and Standard sizes in 1/8-1 in. NPT and BSPP thread and 8-36, 8-145, and 8-232 psi pressure ranges. Regulators are offered in relieving and lockable versions, and various filters are available: coalescing, particulate, purifying, and activated carbon filtration from 40-0.01 micron. Lubricators can refill oil while under pressure, and diaphragm ensures effective lubrication with low flow rate.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage
Chemical Processing and Waste Management

Search for suppliers of: Relieving Regulators | Combination Air Filters/Regulators/Lubricators (FRLs) | Particulate Filters | Coalescing Filters | Activated Carbon Filters | Oil Pump Lubricators

Compressed Air Preparation Unit offers flows to 265 cfm.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Dec 2007 07:50:10 -0500

Measuring 3.3 in. wide, modular AS5 regulator is available with ¾ and 1 in. thread connections in BSPP and NPTF forms. Maintenance windows enable clear viewing of filter condensate levels as well as lubricator fill levels, and filters can be optionally fitted with contamination display. Due to accessible bayonet catch, reservoirs can be removed and refastened as necessary. Lubricators are available with an oil-level indicator and Rexroth ST6 sensor for remote monitoring.

This story is related to the following:
Material Handling and Storage
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Air Pressure Regulators

Valve combines precise pressure and temperature control.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Sep 2007 07:47:03 -0500

Python(TM) 1100 series globe style control valve is suited for applications in HVAC, food processing, pulp and paper processing, and commercial/light industrial manufacturing. Series is equipped with intelligent accessories that enable it to fit within existing distributed control or building automation systems.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
HVAC
Controls and Controllers

Search for suppliers of: Control Pressure Valves | HVAC Valves | Pressure Control, Reducing, Regulating & Relief Valves | Temperature Control Valves

Electro-Pneumatic Pressure Regulator has compact design..

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 27 Aug 2007 07:45:05 -0500

Measuring 3 x 2.4 x 1.2 in., ED02 is constructed with 2 directly controlled 2/2-way proportional valves. It offers 3.5 scfm air flow and provides exact, microprocessor-controlled regulation. Featuring repetitive precision of 0.44 psi and hysteresis of 0.73 psi, pressure regulators can be linked to each other in groups of up to 4 without base plate. Series consumes 300 mA max and is available with IP65 protection. Compressed air supply, possible from both sides, promotes flexible use.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pressure Regulators

Rupture Disks reach operating pressures of 95%.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Aug 2007 07:43:03 -0500

Suited for process plants requiring optimal operating pressure in gas or liquid service, SIGMA EXL(TM) and SIGMA(TM) Reverse Buckling Rupture Disks feature SAF(TM) Technology to accommodate range of burst pressures. Design minimizes fatigue on rupture disk, optimizing plant uptime. Pre-torqued SRB-7RS Safety Holder allows disk to be removed and inspected without having to re-torque, while circular score causes rupture disk to burst without fragmentation.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Gas Regulators minimize gas flow blockages.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Aug 2007 07:33:23 -0500

Consisting of regulators, flowmeter regulators, and flow gauges, Series 30 features Sure-Seat(TM) technology with copper and nickel filter that prevents debris and ice from entering seat during operation. Diaphragms are constructed of laminated neoprene with reinforced nylon fiber. Instead of diaphragm burst disk, high-pressure regulators feature automatic reset relief valve. Flow gauges offer CO2 outlet flow up to 35 cfh without freezing or blocking gas flow.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Gas Regulators | Flow Regulators | Flow Gages

Pneumatic Module facilitates bus passenger access.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 May 2007 07:45:34 -0500

Split System/High Boy Kneeling Module consists of manifold with machined aluminum-anodized body that houses 4 pneumatic poppet valves which inflate/exhaust axle-mounted air bags. Upon actuation, module routes compressed air, in tandem with kneeling position requirements, to lower suspension for passenger loading and then returns vehicle to proper travel height. Solution provides seamless split-level, left/right/complete kneel, and high-boy functions for safe bus passenger access.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Controls and Controllers
Mounting and Attaching Products
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Pneumatic Regulators | Pneumatic Controls | Pneumatic Positioners | Pneumatic Actuators

Rupture Panel ensures bucket elevators operate safely.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 May 2007 07:48:25 -0500

Lift-Gard provides venting and rupture notification to guard against damage caused by explosions in bucket elevators transporting powder and bulk solids. Made of stainless steel, flat venting system combines integral frame and Flo-Tel(TM) detection device in one unit. If Flo-Tel(TM) detects initial explosion inside elevator shaft, it automatically switches off elevator motors to reduce risk of further explosion and stop elevator operation with open explosion vents.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Plant Furnishings and Accessories

Search for suppliers of: Explosion Vents | Explosion Relief Doors

ASME-Approved Rupture Disc suits low-pressure applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 24 Apr 2007 07:46:49 -0500

Tested to over 100,000 cycles, Opti-Gard(TM) SoLo is ASME BPVC Section VIII-approved and supplied in corrosion-resistant Hastelloy for applications from 2 psig. Disc fits all standard and Hygienic Opti-Gard holders and offers 95% operating- to burst-pressure ratio, with performance tolerance of 3%. Pre-fitted Integral Flo-Tel(TM) non-invasive, magnetic burst-detection system is fail-safe, only operating when disc has ruptured to eliminate false alarms.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Rupture Discs

Pressure Regulator Valves suit various washing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Apr 2007 07:46:15 -0500

Designed for pressure washing industry, REG pressure regulating valves handle temperatures up to 194°F and feature all 3/8 in. F fittings. Models AL702X handles to up 8 gpm and 3,700 psi, while AL703X controls up to 10 gpm and 5,000 psi. Designed for in-field replacement, all valves will handle variety of applications.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pressure Control, Reducing, Regulating & Relief Valves

Rupture Disks suit extrusion applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 Mar 2007 07:54:28 -0500

Designed to provide emergency relief of excess pressure build-up, Rupture Disks are available for burst pressures from 1,500-15,000 psi. Intrinsically safe units provide accuracy of ±5% and feature standard melt temperature of 750°F. Choice of process connections includes ½-20 UNF mounting thread with lengths of 1.81, 3, 6, 9, and 12 in.; ½-20 UNF mounting thread with ¼ in. NPT fitting; M18 x 1.5 mounting thread; 5/8-11 NC mounting thread, and ¾-16 UNF mounting thread.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Rupture Discs

Bursting Disk features fail-safe design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 22 Feb 2007 07:38:36 -0500

Available in 316 SS, nickel, Inconel, and Monel, forward-acting, 24 in. FAS Disk is non-fragmenting, keeping disk pieces from entering piping system in event of disk burst. Unit can withstand full vacuum and will operate at up to 90% of stamped rating. Scored portion of disk is placed away from process, preventing product buildup and making it suited for sanitary applications. Non-torque sensitive design eliminates need for pre-torqued rupture disk holders.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Rupture Discs

Diaphragm Valve handles dirty fluids.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Feb 2007 07:00:13 -0500

Featuring heavy-duty construction and immediate response, Hydra-Cell C64 provides pressure as high as 2,500 psi with flow up to 40 gpm. Seal-less design eliminates need for valve plunger seals, while flow-through design minimizes wear on internal parts. Available in brass and stainless steel, pressure regulating valve suits applications requiring high pressure pumping of dirty fluids.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pressure Control, Reducing, Regulating & Relief Valves | Diaphragm Valves

Bursting Disk is designed for low-pressure applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 04 Jan 2007 07:16:02 -0500

Intended for liquid, gas, or vapor applications from 2 psig, Opti-Gard(TM) SoLo reverse-acting bursting disk features 95% operating-to-burst pressure ratio and 3% performance tolerance. Unit comes pre-fitted with integral Flo-Tel(TM) non-invasive, magnetic burst-detection system, which is fail-safe and operates only when disk has ruptured. Standard construction is of corrosion-resistant Hastelloy®, but other materials are available upon request.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Rupture Discs

High-Purity Regulators minimize possible contamination.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 20 Nov 2006 07:52:41 -0500

Cleaned for high-precision chromatographic service, miniature single- and 2-stage bar stock body, metal diaphragm regulators are designed for use with EPA protocol calibration gases, low-level VOC, and GC-ECD analyses. Cleaning process reduces contamination potential, and all-metal diaphragms will not absorb or emit contaminates into gas stream. High-purity regulators feature internal volume capacity that facilitates use and lends to economically efficient purging.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: High Purity Regulators | Gas Regulators