ThomasNet Industrial Newsroom -

Vacuum Generator is used for lifting/clamping/placement.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jul 2008 07:44:02 -0500

Powered by compressed air, E-Vac series is comprised of low-vacuum units up to 21 in. Hg for porous materials and high-vacuum units up to 27 in. Hg for non-porous materials. Vacuum pumps are available in various sizes and flows, and selection of suction cups is available for range of applications. Engineered to minimize air consumption and increase cycle speeds, series has in-line, single stage design that delivers consistent, steady vacuum without fluctuations.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Chemical Processing and Waste Management

Search for suppliers of: Vacuum Pumps | Vacuum Generators

Hemostasis Valves prevent air and fluid leakage.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jul 2008 07:29:40 -0500

Hemostasis valves function as seal by preventing air and fluid leakage around wires and instruments. Able to click into open and semi-open positions and lock with thumb lever, one-handed hemostasis valve (Part #33057) has 2 channels. Straight primary channel has silicone gasket, while angled secondary channel can be used for pressure monitoring and flushing. Self-sealing hemostasis valve (Part #33058) is high pressure and luer activated, and can connect to standard catheters.

This story is related to the following:
Health, Medical and Dental Supplies and Equipment Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Medical Valves | Airlock Valves | High Pressure Valves | Leakproof Valves

Spray Pump features displacement of 0.91 oz per stroke.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jul 2008 07:29:33 -0500

Suited for small and medium wood shops, Binks Comet 4/12(TM) pump is designed with air powered 12:1 two-ball piston pump that is capable of producing 0.4 gpm at 60 cycles/min. Created to apply water-borne and solvent-borne coatings, it can spray wood coatings at fluid outlet pressures from 300-1,200 psi. Available in wall-mount, cart-mount, or tripod-mount outfits, pump features balanced fluid section for steady, even coating flow and hard chrome coated SS pump rod.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pressure Pumps | Pumping Systems | Displacement Pumps | Spray Pumps

Sealless Pump suits crucial liquid containment applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:41 -0500

Dimensionally interchangeable with Viking Heavy Duty Bracketed packed and sealed pumps, Universal Mag Drive Series facilitates upgrade process. Sealless offering features thrust-controlled design, allowing short-term run-dry capabilities and bi-directional pump operation for application flexibility. Offered in cast iron, steel, and stainless steel, products are suited for use with hazardous, hard-to-seal liquids and offer flow rates to 200 gpm with pressures to 200 psi.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Liquid Pumps | Magnetic Drive Sealless Pumps

Piston Pumps suit medical, environmental applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:40 -0500

Rated for max flow of 2.37 cfm, Series 660/680 WOB-L® pumps incorporate wetted aluminum parts treated for corrosion protection and single-phase AC motors of permanent split capacitor design. Oil-less pistons and cylinders, in addition to intake filters, ensure non-contaminated air flow, while SS valves, piston seals, hard-coated aluminum cylinders, and permanently lubricated bearings help extend product life. Pumps provide up to 28.5 in. Hg vacuum or 45 psi pressure.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Corrosion Resistant Pumps | Air Pumps | Piston Pumps

Fire Protection Valves handle pressures to 350 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jul 2008 07:41:20 -0500

Featuring nylon-coated finish and EPDM-encapsulated disc for good closure during shut downs, GD6765-8N grooved butterfly valve is gear-operated for slow-close functionality to protect piping from water shock. It is UL-/ULC-listed to 350 psi water working pressure and UL-listed for indoor/outdoor use. Additionally, F697-0 Class 250 iron body gate valve is rated to 300 psi and carries FM/NYC MEA approvals. Grooved double door silent check valve, KG900-W 350, is also available.

This story is related to the following:
Safety and Security Equipment
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Butterfly Valves | Double Door Check Valves | Gate Valves | Grooved Valves | Fire Protection System Valves | High Pressure Valves

Chemical Metering Pump can handle up to 100 psi.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jul 2008 07:37:58 -0500

Suited for harsh processing applications, Model 520RE high-pressure chemical metering peristaltic pump offers flows of 55 gph at 30 psi to 7 gph at 100 psi. It covers range of applications including low shear feed for contamination-free transfer of acids, bases, and slurries found in chemical-based industries. With repeatability at 99.5%, self-priming pump can accommodate flow rates from 0.1 µL to 350 gpm, and can withstand pressures up to 232 psi.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: High Pressure Pumps | Chemical Transfer Pumps | Metering Pumps | Peristaltic Pumps | Self-Priming Pumps

Flow Control Valve targets liquid CO2 applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jul 2008 07:37:50 -0500

Designed to handle liquid carbon dioxide, SV91 Series features all-welded, leak-tight stainless steel construction with straight-thru flow path. Direct-acting shear seal design ensures positive shifting and sealing. Available in 2 versions rated at 350 and 1,000 psi, solenoid valve is suited for use in fog producing systems, food processing, chillers, and other temperature control devices.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Stainless Steel Valves | Solenoid Valves | Flow Control Valves

Lock Out and Exhaust Valves target packaging industry.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:28 -0500

Available with ¼ and 3/8 in. ports, manual L-O-X® Valves control airflow and are designed to meet OSHA regulations, ANSI standards, European regulation EN 1037, and Canadian Standard CSA Z460. When handle is pulled outward, air moves freely. Short inward push of handle shuts off airflow and opens exhaust port to release downstream air. Equipped with Teflon seals, valves offer indicator port option for test point verification of absence of energy downstream.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage

Search for suppliers of: Lockout Valves | Flow Control Valves | Exhaust Valves | Air Control Valves

Mix-Dispense Valve suits 2-component adhesives and sealants.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Jul 2008 07:41:16 -0500

Based on No-Drip® design that integrates carbide ball-end needles with carbide seats for fluid control, 2200-545 Series Adjustable Stroke Mix-Dispense Valve can control flow of 2-component adhesives and sealants such as silicones, epoxies, urethanes, and acrylics. Measuring 2.25 in. dia and 5.5 in. long, double air actuated valves have two 1/8 NPT ports for 4-way pneumatic connections. Rated for 3,500 psi, valve is also available with eyelet stem for attaching to tool balance.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Material Handling and Storage

Search for suppliers of: Dispensing Valves | Mixing Valves | Adhesive Dispensing Systems | Flow Control Valves | High Pressure Valves

Pressure Pump is suited for range of finishing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:41 -0500

Designed for high-flow circulation systems requiring moderate pressure, Exel(TM) pump works with water-borne and solvent-borne fluids, catalyzed coatings, high solids coatings, abrasive materials, and moisture-sensitive materials. Available in three 4:5.1 all-stainless-steel models, it delivers up to 6.85 gpm at 60 cycles/min. Pump features maximum inlet and working pressure of 100 and 450 psi, respectively, and SS wetted fluid chambers with self-priming pistons.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Pressure Pumps | Stainless Steel Pumps | Circulating Pumps

Zero Leak Check Valve weighs 3.8 g.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:41 -0500

Available in forward and reverse flow configurations, Model 250 Zero Leak Chek® miniature valve uses elastomeric seat to achieve zero leakage, while remaining components are constructed entirely of stainless steel. Valve can flow over 62 slpm (air) at 25 psid, yet has 0.250 in. dia. It comes with maximum working pressure of 3,000 psid.

This story is related to the following:
Material Handling and Storage
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Air Pressure Valves | Stainless Steel Check Valves | Miniature Valves

Hydrostatic Pump targets mobile machinery.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jul 2008 07:29:37 -0500

Utilizing integral electro-hydraulic servo piston assembly to controls rate and direction of hydraulic flow, Model H1 115/130cc is designed for high and medium power mobile machinery that demands steady, instant propulsion and precise control. Closed-circuit, variable displacement, axial piston pump supports next generation engines as industry moves toward Tier 4 emission controls. It is fully PLUS+1(TM) Compliant to interface with company's electronic machine control architecture.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Variable Displacement Piston Pumps | Axial Flow Pumps

Progressive Cavity Pumps have integrated vector drive.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jul 2008 07:38:34 -0500

MD and BW pumps are available with drive that integrates single reduction gear reducer, 4-pole TEFC, inverter-rated ½ hp electric induction motor, and vector type variable frequency drive in NEMA 4 enclosure. Pump and drive combination, covering performance band of 0.08-4.7 gpm and pressures to 360 psi, operates from 1x120 Vac, 15 A circuits with 5-15p grounded plug. Drive has H-O-A switch with 10-turn potentiometer for manual control and will accept 4-20 mA process signal.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Progressive Cavity Pumps

Pumps are designed for severe, mill-duty applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 07:32:38 -0500

Used in hard rock mining, MDX series has low specific speed that provides stable operations by harnessing variable flow conditions confronted in modern mills. Stable flow in combination with optimum head/quantity and efficiency curve ensures efficient mill operation. Also, optimal BEP ensures stable sump level over large flow variations, operational efficiency, and equipment life. Pumps also incorporates slurry diverter technology matched with adjustable suction liner design.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Mining Pumps

Slurry Pump has Linatex® rubber lined impeller.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 07:32:36 -0500

Along with proprietary impeller vane design and Solid/Fluid Flow Technology, LCC-R pump features double-wall construction with outer ductile-iron casing and inner molded-rubber liners. Thickened shrouds and vanes provide optimal wear resistance in heavier slurries, and impeller hub side clearing vanes are effective in clearing solids. Rubber-lined impeller is interchangeable with existing metal impellers. Hub side clearing vane and flat hub side designs are available.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Slurry, Slush & Sludge Pumps

Spring Check Valves prevent flow reversal in piping systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 07:32:32 -0500

Operating without any adjustments or settings, Series SCV is suited for use where backflow could potentially cause damage to pumps, filters, or process equipment. Line pressure moves plastic cone off elastomer seat, opening valve. When inlet flow stops, spring moves cone back onto seat to stop flow. True union design facilitates removal from piping system without breaking down piping connections. Valves are available in PVC with EPDM o-rings or CPVC with FPM o-rings and ½-4 in. sizes.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Spring Loaded Check Valves | Check Valves

Close-Coupled Plunger Pump has compact, direct-drive design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 07:37:26 -0500

Capable of delivering 10 gpm, 7CP6110BH103 and 7CP6110BH153 are 10 and 15 hp single-extended shaft motor-pumps, respectively, that operate at pressures to 1,460 and 2,000 psi. Products mount onto motor using bell housing and flexible coupling and are constructed with forged brass manifold and STG V-Packings. Dipstick is included for checking oil level. Applications include coolant flushing systems, dual gun prep units, and multi-gun truck wash systems.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Plunger Pumps | Close Coupled Pumps

Needle Valves control flow of liquids or gases.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jun 2008 07:45:46 -0500

Featuring fine threading and large seat area, Series HNV is available in male x male, male x female, and female x female configurations ranging in size from 1/8 to 1 in. NPT. Wetted materials are 316SS and PTFE making valves suited for use with corrosives. Tested to assure vibration and thermal stability, bar stock style valves include lock pin to prevent accidental bonnet disengagement.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Needle Valves | High Pressure Valves

Axial Piston Pump is suited for closed circuit applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 17 Jun 2008 07:35:37 -0500

With 6,500 bar nominal pressure and 9 nominal parameters that counteract reduced speed of diesel engine, A4VG variable pump with swashplate design lowers emissions for travel drives used in mobile equipment. Pump case provides manufacturers with ways to include sensors for monitoring swivel angle, high pressure, and rotational speed. Bowl-shaped design avoids high-pressure transitions at sealing points, while high-pressure ports help optimize arrangement of hydraulic lines.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Axial Flow Pumps | High Pressure Pumps | Piston Pumps | Variable Flow Pumps