ThomasNet Industrial Newsroom -

Rachet-Type Crimp Tool has slip-resistant grip handle.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 05 Sep 2008 12:16:33 -0500

Allowing installers to terminate dozens of types of wires and cables, Crimpmaster features Santoprene® textured handle that helps reduce risk of repetitive strains/injuries and extends tool service life by resisting damaging oils, fluids, perspiration, and abrasions. Twenty-one interchangeable modular plug die sets are available for Crimpmaster, including dies for co-ax, fiber optic, and AWG connectors. Dies can be changed on the fly using only screwdriver.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Portable Tools

Search for suppliers of: Crimping Tools

Adjustable Wrenches offer jaws for larger nuts and bolts.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:20 -0500

Offered in 8 lengths from 4-24 in. with chrome or black oxide finish as well as laser-etched inch and metric gradient scales, wide-opening adjustable wrench accommodates bigger nuts and bolts via extra-wide jaw opening standard on lengths 6-12 in. Jaw design is optimized for grip, preventing slippage or nut round off, while creep feed ground parallel face ensures smooth, tight operation. Four-thread knurl and non-protruding jaw promote performance in confined spaces.

This story is related to the following:
Portable Tools

Search for suppliers of: Adjustable Wrenches

Torque Wrench tightens caps/tubes without damaging them.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:17 -0500

Suited for bottle, SMA connector, and medical device manufacturers, torque wrench head can used for round knurled or non-knurled nuts as well as tube shapes that will not collapse under torque pressure. Roller grip head has soft grip material that will not damage targets, and spring-loaded design promotes snug fit. Also, break-over design limits amount of torque applied to assembly or fastening application and is controlled via tamper-proof internal adjustment system.

This story is related to the following:
Portable Tools

Search for suppliers of: Torque Wrenches

Rescue Tool targets firefighters, EMTs, and police officers.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Aug 2008 07:42:13 -0500

Weighing just over 1 lb, No. 88 Rescue Tool is made of drop-forged, 1080 high-carbon steel and combines 6 uses into one device. Tool has beveled plier head with cross-hatched teeth that twist and pull. Tapered pry wedge opens doors and windows, while spanner wrench tightens and loosens hose couplings, and hardened tool steel punch shatters safety glass. Additional features include gas shut-off valve slot and laser heat-treated cutting edges for cutting wires and cables.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Portable Tools
Safety and Security Equipment

Search for suppliers of: Hand Tools | Pliers | Spanner Wrenches | Rescue Equipment & Supplies | Hand Wire Cutters

Autofeed Screwdriver suits decking, sub-floor applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:53 -0500

Powered by 4-pole motor and 18 V LXT Lithium-Ion battery technology, cordless BFR750 has integrated autofeed design and extension handle. Aluminum dustproof housing ensures smooth sliding action, while screw guide prevents screw strip from tangling. Weighing 5 lb, this 16Â¾ in. long tool features ergonomic shape, 1Â¾-2 15/16 in. capacity range for collated screws, silent clutch design, and Â¼ in. hex bit shank. No load speed rating is 0-4,000 rpm.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Electric Screwdrivers | Cordless Screwdrivers | Automatic Screwdrivers

Cordless Screwdriver Kit handles drywall and framing tasks.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:53 -0500

Model BFS450, 18 V LXT Lithium-Ion Cordless Drywall Screwdriver Kit includes 4-pole 4,000 rpm motor, rugged aluminum dust-proof depth adjustment cone, and depth adjustment ring with 60 detent positions. Silent clutch design in forward mode uses durable materials to minimize driver noise. Screwgun weighs 4.2 lb and has ergonomic shape. Kit includes LED light and Rapid Optimum Charger that charges unit's Li-Ion battery in 30 min and also has built-in fan to cool battery.

This story is related to the following:
Portable Tools

Search for suppliers of: Cordless Screwdrivers | Drywall Tools

Impact Wrench Kits are powered by 18 V Li-Ion battery.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:53 -0500

Model BTW253 and BTW25Z 18 V LXT Lithium-Ion Cordless 3/8 in. Impact Wrench Kits deliver 155 lb-ft of torque and feature 4-pole motor which generates energy on magnetic field every 90Âº. Weighing 3.4 lb, ergonomic tools deliver 3,200 impacts/min. They include 3/8 in. square drive with detent pin for quick release, tool hook for impact driver to hang on tool belt, phosphorescent bumper ring, and LED light. Kits include 2 batteries, rapid charger, and contractor bag.

This story is related to the following:
Portable Tools

Search for suppliers of: Tool Kits | Impact Wrenches

Compact Gas Finish Nailers are lightweight and maneuverable.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:36:28 -0500

Including 3 models each with capacity of 100 nails, gas finish nailers combine lithium ion battery technology and gas fuel cell to hold fasteners up to 2Â½ in. in length. Model NT65GS applies 16 ga fasteners from straight magazine, while angled 15 ga NT65GA and angled 16 ga NT65GB allow for easy maneuverability in tight corners and spaces. Units feature double actioned nail feed and reciprocating piston system to drive intermittent cycle rate of 2 nails/sec and 1,000 nails/hr.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Portable Tools

Search for suppliers of: Finishing Equipment | Portable Pneumatic Nailers | Finishing Nails

ESD Safe Tools feature SwissGripÂ® handle.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Jul 2008 08:38:19 -0500

With soft handle surface that ensures secure grip even if hands are wet, SwissGripÂ® screwdrivers transfer rotational forces of the hand to screw, maximizing torque. Compact 8215 ESD Screwdriver Set includes ESD handle and precision screwdrivers. Designed to check screw tightening torques for assembly operations, 8315A ESD TorqueÂ® Handles come with preset torque setting range of 10 cNm to 5 Nm, which can be adjusted according to specific requirements.

This story is related to the following:
Materials and Material Processing
Portable Tools

Search for suppliers of: Hand Tools | ESD Safe Screwdrivers | ESD Products | Torque Controlling Screwdrivers

Wrench Set services automotive serpentine belts.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:46 -0500

With fine tooth ratcheting feature, 9-Piece Wrench Set No. 5333 allows positioning of wrench-driving end for tensioner access from any angle, and direct access to tensioners without removing engine accessories or frame components. Set includes 8 interchangeable adapters that allow service to most serpentine belt applications including GM, Ford, Dodge, Toyota, Saturn, and Volkswagen.

This story is related to the following:
Portable Tools

Search for suppliers of: Ratchet Wrenches | Wrench Sets | Automotive Wrenches

Tie Rod Wrench accommodates 9 sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:46 -0500

Designed to adjust tie rods on vehicles with rack-and-pinion steering, Tie Rod Wrench No. 615 works on most spline, hex, and two flat design tie rods. Spring-loaded upper jaw pivots to accommodate tie rods ranging in size from 10-18 mm and is self-adjusting. Cam action increases gripping pressure as load applied to handle increases.

This story is related to the following:
Portable Tools

Search for suppliers of: Automotive Wrenches

Crankshaft Wrenches repair Harley DavidsonÂ® motorcycles.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:46 -0500

Used for rotation of crankshaft and to check engine timing and parts clearance, 6-Spline Crankshaft Wrench No. 9270 is custom designed for 2007 Harley-Davidson Sportster and 2008 Buell 6-spline engines, while 24-Spline Crankshaft Wrench No. 9280 is suited for 2006 Dyna 24-spline engines. Reversible ratcheting wrenches are heat-treated and chrome-plated and come complete with E-Z Grip handles to optimize turning power while minimizing hand fatigue.

This story is related to the following:
Portable Tools

Search for suppliers of: Ratchet Wrenches

Finish Nailers drive 1-2 1/2 in. nails into hardwood.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jul 2008 07:36:51 -0500

Suited for woodworkers and carpenters, 15 gauge Model D51276K and 16 gauge Model D51257K are designed with Sealed Lube Dual Tech(TM) feature, which allows for oil-free or oil-lube operation. Internal piston catch provides consistent drive on each shot, while tool-free jam clear helps remove bent nails, and 360Â° exhaust cap channels air and dust away from user. Tool-free depth adjustment lets user quickly set depth for proper nail countersink. At 3.85 lb, both nailers minimize user fatigue.

This story is related to the following:
Portable Tools

Search for suppliers of: Portable Pneumatic Nailers

Hydraulic Impact Wrenches offer full and adjustable flow.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:27 -0500

Offering 400 lb-ft torque, Fairmont H8508-1/1V/2/2V turn at up to 6,500 rpm and drill holes through hardened treated wood poles in seconds. Moderate-speed H8508-3/3V offer 280 lb-ft max torque and deliver optimal control. While Â½ in. square drive is standard on select models, 7/16 in. hex quick change chuck on others facilitates and accelerates switch from drilling to driving. All models incorporate twin-hammer impact mechanism, Super Spool(TM) selector, and forward/reverse button.

This story is related to the following:
Portable Tools

Search for suppliers of: Impact Wrenches | Hydraulic Torque Wrenches | Hydraulic Wrenches

Pneumatic Screwdrivers deliver 22-115 lbf-in. of torque.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 07:37:14 -0500

Featuring ergonomic design that provides operator comfort and gripping power, direct drive Torq2(TM) HDP Series is appropriate for soft draw applications, such as wood screws, self-tapping screws, or trim screws. Sculpted thermoplastic elastomer housings help deliver balanced, non-fatigue performance, while quick-change collet facilitates bit changing.

This story is related to the following:
Portable Tools

Search for suppliers of: Ergonomic Pneumatic Screwdrivers

Ratchet Wrenches have ergonomic grips, performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jun 2008 07:45:55 -0500

Model 151 Double Shot dedicated ratchet wrench and 151T socket ratchet wrench are available with 1Â½ in. fat grip that makes using tools more comfortable and secure while reducing worker fatigue. Bolt-thru design of both models lets bolts pass entirely through socket so nuts can be secured on any threaded length. Featuring fluorescent orange sockets to optimize tool visibility, ratchets feature reversing control located in head and are semi-enclosed to minimize fouling.

This story is related to the following:
Portable Tools

Search for suppliers of: Socket Wrenches | Ratchet Wrenches

Drive System tightens bolts to their strength limit.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:46 -0500

Torx PlusÂ® Maxx concentrates highest available levels of torque directly to studs, ball studs, and threaded fasteners. Studs feature drive lobes that extend into threaded portion of fastener point, and full engagement between drive socket and assembly tool spreads surface contact. Established fastening angle enables stems to achieve up to 95% of blind hole torque before failure. Tool can also hold threaded parts, studs, and ball studs stationery while nut is torqued to proper setting.

This story is related to the following:
Portable Tools
Test and Measuring Instruments

Search for suppliers of: Nut Tighteners

Hand Tools include integrated voltage sensor.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:34 -0500

Featuring ergonomic, cushioned handles, line of Circuit Alert(TM) Tools includes screwdrivers, wire strippers, pliers, flashlights, and utility knives, all with built-in removable voltage detector that produces audio and visual alert when it detects live circuit. Tools are made of forged steel for light weight, and many are multifunctional for completing variety of tasks.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Portable Tools
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Multi-Function Hand Tools | Hand Tools | Electricians' Tools | Wire Strippers | Screwdrivers | Electricians' & Linemen's Pliers | Voltage Detectors | Utility Knives

Pneumatic Staplers suit construction sheathing/roofing tasks.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 May 2008 07:41:04 -0500

Model N5010A stapler fires Â½ in. standard-crown 16 ga staples Â¾-2 in. in lenghth. Using 15/16 in. wide-crown 16 ga staples from 5/8-2 in. long, N5021A also features dial for adjusting drive depth. Both devices weigh less than 5 lb and include nose with tool-less release for extraction; top-load, stainless steel plated plastic magazine with open design for monitoring staple quantity; and elastomer grip. Cylinder valve firing mechanism drives up to 13 staples/sec.

This story is related to the following:
Portable Tools

Search for suppliers of: Pneumatic Staplers | Industrial Staplers

Pneumatic Screwdrivers employ positive clutch design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 22 May 2008 08:03:00 -0500

Available with torque ranges from 22-115 lbf-in, Torq2(TM) HPS Series pistol grip drivers are suited for soft draw applications such as wood screws, self-tapping screws, or trim screws. Operator controls torque of positive clutch tool by varying pressure applied to driver, and ergonomic design lends to operator comfort and gripping power. While sculpted thermoplastic elastomer housings promote balanced, non-fatigue performance, quick change collet facilitates bit changing.

This story is related to the following:
Portable Tools

Search for suppliers of: Torque Controlling Screwdrivers | Ergonomic Pneumatic Screwdrivers | Pneumatic Screwdrivers