ThomasNet Industrial Newsroom -

EPON Transceiver has integrated clock and data recovery.

info@productnews.com (ThomasNet News) — Mon, 02 Nov 2009 08:41:01 -0500

Single-chip 10G EPON transceiver for next generation PON systems, GN7350 enables users to build prototype systems for in-house and field testing. CDR eliminates excessive channel noise, and ensures highest link margin and lowest jitter signal by re-timing high speed signal. Custom 10G burst mode transceiver helps reduce BOM.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers

Photoreceivers offer GPPO or coplanar waveguide RF outputs.

info@productnews.com (ThomasNet News) — Fri, 16 Oct 2009 08:40:40 -0500

Operating in 1,310 Nm wavelength band, Quad Photoreceiver Arrays are designed for 10 and 40 km transmission over single-mode fiber conforming to 100 Gigabit Ethernet standard (100GBASE-LR4 and 100GBASE-ER4). Arrays consist of 4 monolithically integrated InGaAs photodiodes on InP substrate and 4 transimpedance amplifiers (TIAs) to produce 4-channel electrical output signal, each channel running up to 28 Gbps. Power consumption is typically 200 mW per channel.

This story is related to the following:
Optics and Photonics
Communication Systems and Equipment

Search for suppliers of: Fiber Optic Receivers | Photodetectors

Transmitter/Receiver Pairs enable HDMI over fiber connections.

info@productnews.com (ThomasNet News) — Wed, 05 Aug 2009 08:28:18 -0500

Allowing HDMI device to be added in analog room, HD-TX1-F and HD-RX1-F units extend uncompressed HDMI and IR/RS-232 control signals up to 1,000 ft over single multimode fiber connection. They can also connect 2 HDMI switchers in different parts of building so source or display device can be located remotely from central equipment. Pairs include universal IR repeaters with range of up to 192 kHz, bidirectional RS-232 extenders up to 115k Baud, and 12 Vdc power pack.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics
Test and Measuring Instruments

Search for suppliers of: Fiber Optic Transmitters | Fiber Optic Receivers | Cable Extenders

GBIC Transceiver operates at wavelength of 1,470 Nm.

info@productnews.com (ThomasNet News) — Wed, 15 Jul 2009 08:31:55 -0500

Hot-swappable 1000Base-CWDW GBIC transceiver plugs into 802.3z standards-compliant GBIC port or slot of Cisco switch or router in fiber-optic networks. Suited for telecom and data communications applications, product is designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Transceivers

Optical Transceiver features G.703 connections.

info@productnews.com (ThomasNet News) — Mon, 13 Jul 2009 08:35:02 -0500

Digitalized point-to-point optical transceiver employs VLSI circuitry, digital multiplexer, and optical transmission technology for enabling high-speed data and TDM integrated access, and transmits 4E1/8E1/16E1 as fiber optic multiplexer or FMO. It has single board structure and offers transmission range of 2-120 km. Using built-in power supply switching to provide over-voltage and over-current protection, device provides selection of dual and single filament bidirectional types.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers

CCTV Video Transmitters/Receivers have self-healing feature.

info@productnews.com (ThomasNet News) — Fri, 26 Jun 2009 08:28:10 -0500

Digital fiber optic video transmitters and receivers with bi-directional data include FVTFVR1010SHR single channel with data series, FVT/FVR4014SHR with 4 video and data channels, and FVT/FVR8018SHR with 8 video and data channels. In event of broken fiber connection, video and data transmission is seamlessly re-routed when system is configured in ring topology. Bi-directional data transmission allows for camera PTZ function to be controlled from any monitoring location.

This story is related to the following:
Communication Systems and Equipment
Optics and Photonics

Search for suppliers of: CCTV Equipment | Fiber Optic Receivers | Fiber Optic Transmitters | Video Transmitters

Optical Transceivers are compatible with HP devices.

info@productnews.com (ThomasNet News) — Fri, 05 Jun 2009 08:33:40 -0500

Model J4858A HP compatible transceivers are 1000BASE-SX-SFP transceiver modules used for multimode fiber at 850 nm wavelengths. Hot-pluggable transceivers connect electrical circuitry of module with optical or copper network, and feature internal serial EEPROM that is encoded with security information. Units can be used in conjunction with any SFP module that HP device supports.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers

Transceivers are hot swappable.

info@productnews.com (ThomasNet News) — Tue, 02 Jun 2009 08:31:21 -0500

Protocol-independent 10G-XEANPK-LR compatible transceivers operate at wavelength of 1,310 nm, are designed for 10 Gb/sec SONET/SDH, Fibre Channel, Ethernet gigabit, and 10 Gb Ethernet. Targeted at MMF applications, units are Cisco and Foundry compatible. XFP transceivers offer wide variety of 10 Gb Ethernet connectivity options for operation in data centers, enterprise wiring closets, and services providing transport applications.

This story is related to the following:
Optics and Photonics
Communication Systems and Equipment

Search for suppliers of: Fiber Optic Transceivers | Wireless Transceivers

Fiber Optic Transceiver is NETGEAR compatible.

info@productnews.com (ThomasNet News) — Mon, 01 Jun 2009 08:22:53 -0500

Operating on ordinary multimode fiber (MMF) with optic link spans up to 1,815 ft long, AGM721F provides fiber connectivity to NETGEAR switches such as FSM750S, FSM726S, and FSM726. Transceiver is compliant with IEEE 802.3z standard and features 1000BASE-SX hot-swappable function.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Transceivers

Transceiver Modules streamline fiber optic digital video.

info@productnews.com (ThomasNet News) — Thu, 16 Apr 2009 08:38:09 -0500

Available in standalone or rack-mount card versions, fiber optic digital video transceiver modules are suited for use in CCTV monitoring systems and intelligent transportation systems. They support transmission of video over one optical fiber and ensure proper system operation in complex electromagnetic environments. Compatible with NTSC, PAL, and SECAM video formats, hot-pluggable units use 10-bit/20 MHz sampling technology for video digital encoding.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Transceivers

SFP Transceiver provides 40 km data link over single fiber.

info@productnews.com (ThomasNet News) — Fri, 03 Apr 2009 08:38:21 -0500

Suited for high-speed datacom applications, 2.5 Gb/s hot pluggable SFP Transceiver features upstream 1,310 DFB laser and downstream 1,490 PIN/TIA receiver. Bi-directional, optical transceiver is based on SystemOnGlass(TM) technology, which consists of mountable glass chip that integrates commercial laser diodes, photodiodes, and minimum number of electronic and electro-optic components using no free space elements.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers | Fiber Optic Transceivers

CWDM Transceivers feature SFP design.

info@productnews.com (ThomasNet News) — Tue, 31 Mar 2009 08:31:46 -0500

Compatible with SFP (small form-factor pluggable) modules, including those from CISCO, HCDTR series is designed to support SONET, Gigabit Ethernet, Fiber Channel, and other communication standards. Areas of use include telecommunication and data communication applications.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Transceivers

Transceiver is designed for use with single-mode fiber.

info@productnews.com (ThomasNet News) — Thu, 26 Mar 2009 08:27:39 -0500

Compliant with SONET/SDH recommendations for OC-48 specifications, 10/100/1000 BASE-T SFP optical copper transceiver operates at 1,310 nm wavelength and is suited for serial telecom and datacom applications. Available in small form factor package, unit is hot pluggable and consumes mimimal power. Transceiver's 2X10 pin metal housing offers EMI shielding.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Transceivers

Optical Transceivers suit serial data communication.

info@productnews.com (ThomasNet News) — Thu, 19 Mar 2009 08:32:57 -0500

Designed for Gigabit Ethernet applications, GBIC Series units provide IEEE-802.3 compliant link at data rates of 1.25 GB/sec. Housed in stainless steel package and operating from +3.3 V supply, hot-pluggable units are also compliant with ANSI specifications for fiber channel applications at 1.06 GB/sec. Receiver section incorporates 1,550 nm DFB for single-mode operation with temperature compensation and automatic power control circuit and InGaAs/InP PIN photodiode.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers

Transceivers can drive 10 Gb of Ethernet connectivity.

info@productnews.com (ThomasNet News) — Thu, 12 Mar 2009 08:29:05 -0500

Compliant with IEEE 802.3z standard, and featuring 1000BASE-SX hot-swappable functionality, NETGEAR compatible transceivers are capable of adding fiber connectivity for NETGEAR switches such as the FSM750S, FSM726S and FSM726. Interoperable with 10GBASE-SR, LR, or ER XFP optics standard, units emulate AGM721F and AGM722F GBICs; AGM731F, AGM732F, and AGM733F SFPs; and AXM751, AXM752 XFPs.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Fiber Optic Transceivers

Optical Transceivers promotes video-over-fiber quality.

info@productnews.com (ThomasNet News) — Wed, 25 Feb 2009 08:34:43 -0500

Used as a pair, MetroBlazer(TM) MB2100 Video Optical Transceivers achieve long-distance transmission of real-time, non-distorted, and non-compressed video signal. Plug-and-view components help meet high-bandwidth requirements of various video over IP applications, extending reach with single-core optical fiber. QoC is enhanced for effective interaction of video with data and voice in unified communications. To address standards variance, products are compatible with NTSC, PAL, and SECAM.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers | Fiber Optic Transceivers

Optical Transceiver suits Fibre Channel SAN applications.

info@productnews.com (ThomasNet News) — Fri, 09 Jan 2009 08:31:38 -0500

Based on 1,310 nm DFB laser, SFP+ LR Model AFCT-57D5ATPZ operates over single-mode optical fiber at signaling rates up to 8.5 GBd for distances up to 10 km. Unit includes digital diagnostic interface and provides real-time monitoring of transmitted optical power, receive optical power, laser bias current, temperature, and supply voltage information. RoHS-compliant transceiver enables production of 8 Gb/sec SAN applications, such as inter-switch links and storage replication.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers | Fiber Optic Transceivers

Transceivers offer single fiber bi-directional operation.

info@productnews.com (ThomasNet News) — Thu, 11 Dec 2008 07:43:12 -0500

Operating at dual wavelengths in 1,310-1,550 nm range, Bi-Di SFP-LC and Bi-Di GBIC-SC support data rates of 155 Mbps, 622 Mbps, and 1.25 Gbps. Transmitter section incorporates FP/DFB and IC with temperature compensation and automatic power control circuitry, while receiver section incorporates InGaAs/InP PIN photodiode with AGC for wide dynamic range. Units feature single LC or SC type fiber optic interface connection, and 5-80 km working distance range using FP or DFB light source.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers

Optical Fiber Modules are based on 650 nm wavelengths.

info@productnews.com (ThomasNet News) — Mon, 08 Dec 2008 07:46:35 -0500

Optical fiber transmitter and receiver modules, HFBR-15x5/25xx includes 4 models supporting SERCOS, Interbus and PROFibus standards. They are available with SMA and ST connector ports and are compatible with 1 mm POF/200µm HCS. Model HFBR-1505/AFZ/2505AFZ is designed for 10 MBd SERCOS, HFBR-1505CFA/2505CFZ supports 2 MBd Interbus-S, HFBR-1515BFZ/2515BFZ supports 10 MBd PROFIbus-S, and HFBR-1506AFZ/2506AFZ supports 16 MBd SERCOS. Models have operating temperature range from -40 to 85°C.

This story is related to the following:
Controls and Controllers
Computer Hardware and Peripherals
Optics and Photonics
Communication Systems and Equipment

Search for suppliers of: Fieldbus Components | Data Modules | Fiber Optic Receivers | Fiber Optic Transmitters

Optical Transceivers have range of 1,310 or 1,550 nm.

info@productnews.com (ThomasNet News) — Mon, 20 Oct 2008 07:44:53 -0500

Hot-swappable XFP modules are 100% CISCO compatible, and can be removed from host device. Pluggable interfaces include data speeds of 10/9.9 G. XFP-based systems offer features for physical network connectivity, including media converters, distance extenders, cross-connects, Ethernet switching and routing equipment, and wave division multiplexing solutions.

This story is related to the following:
Optics and Photonics

Search for suppliers of: Optical Transceivers | Modules