ThomasNet Industrial Newsroom -

Fan Speed Control targets condenser applications.

info@productnews.com (ThomasNet News) — Wed, 05 Aug 2009 08:28:19 -0500

Housed in weather-resistant enclosure, Model P266 is designed for single-phase Permanent Split Capacitor motors used in variety of outdoor low-ambient refrigeration and air conditioning condenser applications. Control includes stainless steel electronic pressure transducer that prevents refrigerant leaks, as well as field adjustable speed, pressures, start voltage, and minimum speed/cutoff.

This story is related to the following:
Controls and Controllers
HVAC
Green & Clean

Search for suppliers of: Speed Controls | Fan Controls

Motor Speed Regulator is microprocessor driven.

info@productnews.com (ThomasNet News) — Wed, 15 Jul 2009 08:31:54 -0500

In-line with all EMC standards, motor speed regulator features protection of internal temperature and against overcurrent and short-circuits. Customizable regulator offers design options including LEDs, keys instead of buttons, softstart, and remote control. Company logo or other characters can be printed on product casing.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motor Speed Regulators

Controller ICs are available for bipolar and unipolar motors.

info@productnews.com (ThomasNet News) — Thu, 11 Jun 2009 08:34:04 -0500

Models LS8297, LS8297CT, and LS8397 Stepper Motor Controller ICs offer half-step and full-step sequences in both normal drive and wave drive modes. LS8297CT and LS8397 models offer correction for torque-ripple, while LS8397 is also available with power saving holding-torque mode for maintaining drivers at reduced power level when motor is not turning. Four phase outputs and 2 inhibit outputs are provided for driving external H-bridge drivers, allowing for selection of standard driver.

This story is related to the following:
Electronic Components and Devices
Controls and Controllers

Search for suppliers of: Integrated Circuits (IC) | Motor Speed Controls | Motor Controllers

Digital Amplifier Module permits multifunctional operation.

info@productnews.com (ThomasNet News) — Wed, 20 May 2009 09:28:46 -0500

Miniaturized DEC Module 24/2 is digital 1-quadrant amplifier with speed controller for brushless EC motors with Hall Sensors up to 48 W and surface area measuring less than 5 cm². It has supply voltage range of 8-24 Vdc (alternatively 5 Vdc) and continuous output current of 2 A. Designed for maximum motor speed of 80,000 rpm, amplifier has 2 connector arrays arranged in 2.54 mm pattern for supporting connectivity and integration into OEM-side motherboard.

This story is related to the following:
Electronic Components and Devices
Controls and Controllers

Search for suppliers of: Amplifier Modules | Digital Amplifiers | Motor Speed Controls

OEM Motor Drive provides positioning control.

info@productnews.com (ThomasNet News) — Fri, 17 Apr 2009 08:38:15 -0500

Measuring 54 x 28 x 9 mm, Model EPOS2 36/2 controls brush DC motors as well as brushless EC motors, and is suited for single-axis and multiple-axis applications of miniature size. Plug-in module can be operated as speed controller or current controller in addition to position controller. Providing 36 V, 2 Amp operation, drive is designed to command and control within CANopen network, but can also communicate via USB or RS232 interface.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motion Controllers | Motor Drives | DC Drives | Motor Controllers | Speed Controls | Positioning Controls | Motion Controls | Current Controls

Brushless Motors/Controls suit adjustable speed applications.

info@productnews.com (ThomasNet News) — Mon, 13 Apr 2009 08:30:46 -0500

Available with standard NEMA face/foot mount, BSM25C and BSM33C Motors range from ¼-3 hp. BMC Series controls, using standard 115/208/230 Vac, require no programming and provide tight speed regulation of better than 0.5%. Units use industry standard input command of ±10 Vdc or optional pot input for speed control. Housed in fully protected package, combination of BSM motor and BMC control is adjustable to cover speeds to 7,000 rpm with adjustable acceleration time of 0.1-30 sec.

This story is related to the following:
Mechanical Power Transmission
Controls and Controllers

Search for suppliers of: Brushless DC Motors | Motor Speed Controls

Motors and Speed Control suit continuous-duty applications.

info@productnews.com (ThomasNet News) — Mon, 16 Mar 2009 08:30:05 -0500

Available in 24A and 33A frame motor sizes, 12 V PMDC Gearmotors and Motors can be built in combination with parallel shaft, hollow shaft, or right-angle gearheads with gearmotor output speeds from 5.6-660 rpm. Units range from 1/50-1/8 hp and can generate up to 310 lb-in. torque. Pulse-width-modulated Type WPM-12 Vdc Speed Control is suited for battery-powered, solar-powered, and other low-voltage applications that require basic, single-direction speed control.

This story is related to the following:
Mechanical Power Transmission
Controls and Controllers

Search for suppliers of: Permanent Magnet Motors | DC Motors | Motor Speed Controls | DC Gearmotors

Variable Speed DC Drives comply with ROHS directive.

info@productnews.com (ThomasNet News) — Mon, 16 Mar 2009 08:30:05 -0500

Unfiltered type UPM DC motor speed controls target PMDC gearmotors/motors operate from 115/230 Vac and offer output voltages from 0-90 Vdc at 115 Vac and 0-180 Vdc at 230 Vac, at 50/60 Hz input voltage. Offering PWM control, filtered type WPM DC motor speed controls operate from 115 Vac at 50/60 Hz line and provide output of 0-130 Vdc. Both feature 8 DIP switches and ¼ in. quick connect tabs or plug-in terminal connections.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Variable Speed Motor Drives | Motor Speed Controls | Speed Drives

Speed Regulator improves tube drilling operations.

info@productnews.com (ThomasNet News) — Thu, 12 Mar 2009 08:29:02 -0500

Configured for tube or clevis drilling, Skipchek® delivers controlled feed, followed by fast skip, and returns to controlled feed. Skip distance is not adjustable and engineered to meet application demands. Able to be configured to drill through more than 2 walls, leak-proof product is available in ½, 1, 2, 3, 4, and 6 in. stroke lengths with max capacity of 1,200 lb. It eliminates need to use 2 drill motors drilling on opposite sides of tube, producing perfectly aligned holes.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Speed Regulators

Speed Regulator suits second operation machines.

info@productnews.com (ThomasNet News) — Thu, 12 Mar 2009 08:29:02 -0500

Useful when automatic extension of plunger rod will interfere with second operation, Slow Return Kinechek® controls speed of load pushing on plunger rod with smooth, constant rate. Slow Return feature slows automatic extension of plunger rod via fixed restricting orifice built into unit's internal flow passages. Time required for plunger rod to extend can range from 6-22 sec/in. of stroke. Leak-proof solution comes in ½, 1, 2, and 3 in. versions, with max capacity of 1,200 lb.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Speed Regulators

Speed Control features motor-mounted design.

info@productnews.com (ThomasNet News) — Wed, 11 Mar 2009 08:33:52 -0500

Designed to attach directly to permanent magnet DC motors up to 1/6 hp, TightDrive(TM) offers 20:1 speed range with max output of 90 V. Variable speed SCR drive is housed in aluminum extrusion, which offers NEMA1/IP30 protection and heat dissipation. Three accessible adjustable potentiometers provide settings for minimum RPM, maximum RPM, and current limiting. Intended for 115 V 50/60 Hz operation, unit comes with 3 ft power cord and NEMA 5-15P plug.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Adjustable Speed Drives | Motor Speed Controls | Variable Speed Motor Drives | Silicon Controlled Rectifier (SCR) Drives

Head Pressure Control suits humidity-sensitive environments.

info@productnews.com (ThomasNet News) — Thu, 05 Mar 2009 08:37:32 -0500

With support for both dual pressure or temperature inputs, ICM333 operates as pressure or temperature-sensitive motor fan speed control, regulating head pressure by varying amount of airflow through condenser. Unit is compatible with single-phase systems operating at 120-480 Vac. Other features included are integral heat pump bypass circuitry, allowing for electronic bypass of speed control, and tamper-proof dials for adjusting temperature/pressure set points.

This story is related to the following:
HVAC
Controls and Controllers

Search for suppliers of: Heat Pump Controls | Fan Controls | Motor Speed Controls

High Current DC Drives offer 50-200 A continuous current.

info@productnews.com (ThomasNet News) — Thu, 29 Jan 2009 08:33:12 -0500

With operating voltage of 8-48 Vdc, QC7000 Series provides speed, torque, and braking control in variety of applications, including electric and electro-hydraulic powered vehicles and equipment. Microprocessor-based units measure 2.7 in. in height and are designed to meet IP65 environmental requirements while delivering 500 A peak and 200 A continuous power.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motor Drives | DC Drives | Motor Speed Controls

Amplifier/Controller features 4-quadrant design.

info@productnews.com (ThomasNet News) — Thu, 29 Jan 2009 08:33:05 -0500

Suited for variety of speed and positioning control applications, QC6210 Series operates across range of 7-24 Vac or 10-30 Vdc at up to 30 A. Open-frame amplifier offers adjustable current limits, loop gain, and independent ramp times for each direction, as well as multiple operating modes. Unit is suited for industrial vehicles, conveyors, machine tools, packaging machines, assembly machines, and other equipment that requires bi-directional speed, torque, or position control.

This story is related to the following:
Controls and Controllers
Electronic Components and Devices

Search for suppliers of: Speed Controls | Acceleration, Displacement & Velocity Amplifiers | Positioning Controls | Motor Speed Controls

AC Speed Control suits fans, motors, and pumps.

info@productnews.com (ThomasNet News) — Tue, 07 Oct 2008 07:51:41 -0500

Featuring onboard programming for setting various parameters, microprocessor-based SmartFan Nimbus-HP is TRIAC-based fan, pump, and motor control that operates from 85-300 Vac single-phase power source and has output power rating of 18 A. It controls induction motors (shaded pole or permanent split capacitor) approved for voltage control, and motor speed can be based on analog control signal (4-20 mA, 2-10 Vdc) or temperature at up to 3 remote sensors.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motor Controllers | Programmable Controllers | Motor Speed Controls

Motion Control offers ceramic motor specific functionality.

info@productnews.com (ThomasNet News) — Tue, 09 Sep 2008 07:38:55 -0500

Available as single or dual axis control and drive unit, FlexDC Motion Controller is designed for high performance ceramic servo motors and positioning stages. It includes PIV/PID servo control with quadrature or Sin/Cos encoders, providing nanometer-level position control with synchronized I/O. Featuring analog joystick input for manual jogging, unit provides specific ceramic motor algorithms as well as PC based GUI for programming, system tuning, and set-up.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motion Controllers | Motion Controls | Motor Speed Controls | Servo Controls | Motion Control Systems

Speed Controls survive in harsh environments.

info@productnews.com (ThomasNet News) — Mon, 21 Jul 2008 08:01:42 -0500

Fully encapsulated to meet IP65 standards, MMP 25 A Series Electronic Controls are designed for battery-powered applications that require adjustable output voltage. Measuring 1 x 2 x 4 in., they provide 25 A continuous current at 12, 24, or 48 Vdc, delivering up to 600 W of continuous output power. Units can deliver up to 40 A of peak current for peak output power capacity of 960 W and are provided with 7 quick-connect terminals for connecting to power, motor leads, and potentiometer.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Electronic Controls | Motion Controllers | Speed Controls

AC Motor Speed Controls drive inverter-duty gearmotors.

info@productnews.com (ThomasNet News) — Thu, 03 Jul 2008 07:29:54 -0500

Operating from single-phase 115 or 208/230 Vac line voltage, Pacesetter(TM) 2994 and 2998 ac motor speed controls can drive 230 Vac, 50 or 60 Hz, inverter-duty, 3-phase gearmotors and motors ranging from 1/8 to 1 hp. Model 2994 features multifunction keypad, 4-digit LED display, 6 LED indicators, on/off switch, and speed potentiometer. Housed in NEMA-1/IP40 enclosure for basic environmental protection, Model 2998 is UL and CE certified with built-in RFI (EMI) filter.

This story is related to the following:
Controls and Controllers

Search for suppliers of: AC Drives | Motor Speed Controls | Variable Speed Motor Drives

Bus Terminal controls speed of single-phase AC motor.

info@productnews.com (ThomasNet News) — Tue, 01 Jul 2008 07:38:35 -0500

Suitable for drives with quadratic load characteristics such as fans and pumps, Model KL2791 Bus Terminal I/O system enables direct connection of small, 1 A, single-phase motors rated 120 V, 60 Hz, in order to achieve setting range for flow rate from 10-100%. Set value for motor speed is specified by 16-bit value, and motor is switched on and off with mains synchronous pattern. Compact speed controller comes in standard bus terminal housing with width of 12 mm.

This story is related to the following:
Green & Clean
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Motor Speed Controls | Bus Controllers | I/O Controllers | Motor Controllers

Speed Control Systems promote crane productivity and safety.

info@productnews.com (ThomasNet News) — Thu, 05 Jun 2008 07:36:19 -0500

Designed to meet needs of industrial crane systems, DynA solutions offer continuous speed control that increases safety through reduced risk of load damage and minimized load swing. UI increases productivity by facilitating installation and start-up, while torque and brake control management uses inverter and vector control technology to promote reliability. While DynAC Vector and DynAHoist Vector suit traveling and hoisting applications, DynADrive suits traveling applications only.

This story is related to the following:
Controls and Controllers
Construction Equipment and Supplies

Search for suppliers of: Speed Controls | Crane & Hoist Controls