ThomasNet Industrial Newsroom -

Safety Contact Strips optimize safety on moving parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jul 2008 07:38:24 -0500

Offered in EPDM for resistance to ozone and weathering, Model SGE-88 mounts with double-sided tape, while Model SGE-1510 mounts with integrated angle on profile. Units are protected from damage by outer covering of non-conductive rubber that allows actuation angles up to 90°. If moving part with safety edge strikes operator, or vice versa, safety edge is depressed and will send signal to power source to stop. Applications include gates, doors, machines, automatic mixers, and scissor lifts.

This story is related to the following:
Safety and Security Equipment
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Machinery Guards | Safety Controls | Sensing Edges | Safety Products

Piezo Stage Controller offers multi-axis trajectory control.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jun 2008 07:45:57 -0500

Designed for piezo nanopositioning systems with up to 6 axes, E-712 features up to 50 kHz sensor update rate, 20-bit D/A converters, and 600 MHz processor. It has Ethernet interface for remote control, real-time operating system, integrated power amplifiers, and optional external high-power amplifiers. With higher-order polynomials-based digital linearization algorithms, unit offers positioning accuracy of 99.999% of travel range, and also eliminates tracking errors.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Digital Controls | Motion Controls | Multi-Axis Controls | Motion Controllers

Motion Control System suits precise multi-axis applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Jun 2008 07:43:05 -0500

Designed to meet machine builders' current automation needs, TMC-3D combines 8-axis motion controller and digital servo drive in same unit. Based on MotionChip(TM) technology, it controls (via CAN-bus) up to 8 Technosoft intelligent drives (including itself). Embedded servo drive is designed for dc, brushless, and step motors up to 640 W. Controller generates 3D and 2½-D trajectories and sends reference to slaves as PVT (position, velocity, time) points via CAN-bus.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motion Control Systems | Multi-Axis Controls | Servo Drives

Separator System eliminates need for separate feeder/hopper.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Jun 2008 07:43:37 -0500

Feed-Vac Vibro-Energy Separator System combines functions of conveying, storage, feeding, and screening of dry materials into one unit. It includes Vibro-Energy Separator with ability to size product into 2 to 5 fractions, combined with Accu-Feed System conical storage bin that has adjustable feed controller. Final component is adaptable vacuum conveying system capable of transporting dry powder or granule products through dedicated pipe system to Accu-Feed and separator.

This story is related to the following:
Controls and Controllers
Material Handling and Storage
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Feeder Controls | Storage Bins | Feeding Machinery | Separating & Screening Equipment & Machinery | Vacuum Conveying Systems

Piezo Controller System is available with 3 or 6 axes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 15 May 2008 07:39:17 -0500

Modular Digital Piezo Controller System E-712 offers up to 50 kHz sensor update rate. It includes 20-bit D/A converters enabling subnanometer position resolution over travel ranges of over 1,000 µm. Featuring real-time OS, it offers auto-calibration and remote control via TCP/IP interface. Software-tunable proportional-integral digital servo with 2 notch filters allows operation of piezomechanics close to resonant frequency. USB, RS-232, and Ethernet interfaces are included.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Multi-Axis Controls | Motion Controls | Digital Controls

Sorter Controls feature automated diagnostics.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Apr 2008 07:44:58 -0500

Supporting UniSort® sliding shoe and linear belt sorters, controls provide automated calibration and monitoring. Multi-speed operation allows facilities to adjust sortation operations for higher speeds on high-demand days or during peak seasons, while energy saving mode automatically shuts down sorters during periods of inactivity. Automated diagnostics, including tracking alignment, divert precision, and switch mechanism testing, provide problem identification and corrective action.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Machine Controls

Programmable Logic Controller is CE compliant.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 04 Apr 2008 07:33:14 -0500

XL OCS features built-in I/O with removable terminal blocks, daylight readable touch screen display to facilitate process visualization and machine control, operator interface, and 2 serial ports with downloadable protocol. Measuring 3.75 in. square, compact and palm-sized unit includes support for MicroSD(TM) memory modules. It is suited for applications in water treatment, packaging, and agriculture industries.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Programmable Logic Controllers (PLC) | Process Controllers | Machine Controls

Safe Camera System offers 3D safety monitoring and control.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 05 Mar 2008 07:43:47 -0500

SafetyEYE consists of a sensing device and control unit. Image data is transferred via a fiber optic cable to the control unit which evaluates the monitored area in 3D. If the control unit detects an object in a detection zone, SafetyEYE initiates a safe stop for the process or machine. The System can perform standard control functions as well as monitor multiple independent operations simultaneously.

This story is related to the following:
Safety and Security Equipment
Controls and Controllers

Search for suppliers of: Safety Equipment & Supplies | Safety Products | Safety Controls

Run Bar is intended for two-hand machine actuation.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jan 2008 07:37:47 -0500

Designed to comply with ANSI B11.19 and ISO 13851 (EN 574) Type IIIC requirements, DUO-TOUCH®l run bar interfaces with DUO-TOUCH SG 2-hand control modules, SC22-3 safety controllers, and other Type IIIC control systems. It comes with 2 preinstalled diverse-redundant, microcontroller-based photoelectric STB touch buttons that include continuous internal self-checking. Featuring 13 ga cold-rolled steel construction, bar suits general initiation of cycle on different equipment.

This story is related to the following:
Materials and Material Processing
Controls and Controllers

Search for suppliers of: Steel Bars | Machine Controls | Safety Controls

Generator Set Controls enable system monitoring via Internet.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jan 2008 07:35:20 -0500

Designed on modular platform to facilitate data communication between generator set components, Command® generator set controls are available in 3 configurations, depending on complexity of power system and customer needs. Units include main control board and HMI that provides intuitive generator set operation for all generator set functions, including metering, configuration, and fault diagnostics. Unit includes backlit graphics on LCD display and manual/off/auto function switches.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Generator Controls | Machine Controls

Preset Controller measures flow of hydrocarbon liquids.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jan 2008 07:15:40 -0500

DL8000 microprocessor-based batch delivery controller calculates flow for custody transfer using average measured product flow rates, measured temperature, pressure, and density to achieve measurement of flow at standard conditions. Double-precision math computations are enabled by Fisher® ROC-Series remote operations controller technology. Unit can be configured for different batch loading applications using ROCLINK(TM)800 software and is fully programmable for PLC tasks.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Programmable Controllers | Microprocessor-Based Controllers | Liquid Flow Controllers | Batch Controllers | Liquid Flow Measurement Systems

Cam Roller Runner Block does not require preload adjustment.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Dec 2007 07:44:40 -0500

Available in sizes of 15 and 25, eLINE Cam Roller runner block for eLINE profiled rail systems provide quiet transport of light loads at speeds up to 12 m/sec. Users can choose between runner blocks in standard length with 4 cam rollers, or short runner blocks with 2 cam rollers. Aluminum eLINE profiled rail system compensates for tolerance errors and unevenness in mounting surfaces. Rails can be mounted from above/below and come in one-piece lengths of up to 4,000 mm.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Controls and Controllers
Material Handling and Storage

Search for suppliers of: Cam Follower Roller Bearings | Plastic Cams | Cam Followers | Linear Motion Components | Precision Guide Rails | Plastic Rollers

Vision-Guided Motion Controller measures 44 x 83 x 133 mm.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 Nov 2007 07:53:58 -0500

Guidance 1400 series multiaxis robotic motion controller contains 4 motor drivers, encoder input channels, 700 MIPS processor, digital inputs and outputs, Ethernet, and RS-232 interfaces. It can output motor bus voltages from 24-48 Vdc and up to 500 W total motor power. User Interface is based on internal web server and vision software includes measurement tools and object locator that can locate multiple instances of parts in any orientation.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Multi-Axis Controls | Motion Controllers | Microprocessor-Based Controllers

Tool Control System suits vehicle fastening operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 Nov 2007 07:32:48 -0500

Used in assembly operations, Wireless Tool Control System provides complete control over selection and use of digital torque wrench. Operator logs on to wireless control system, which selects correct socket for particular vehicle. When correct socket has been selected, system transmits details of torque tasks to digital torque wrench. Wrench receives torque requirements and specifications via Bluetooth from Control System and instructs sequence of fastenings to be carried out.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Machine Tool Control Systems | Wireless Controls

Run Bar facilitates 2-handed control machine actuation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 Nov 2007 07:54:49 -0500

Minimizing possibility of accidental actuation, DUO-TOUCH® Run Bar interfaces with DUO-TOUCH SG 2-Hand Control Modules, SC22-3 Safety Controllers, or other Type IIIC control systems to facilitate actuation. Dual diverse-redundant, self-checking, MCU-based photoelectric STB Buttons minimize risk of defeat and are immune to ambient light, EMI, and RFI. Constructed of 13-gauge cold-rolled steel, ergonomic design reduces hand, wrist, and arm stresses.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Controls and Controllers

Search for suppliers of: Photoelectric Actuators | Pushbutton Controls | Machine Controls

Closed-Loop Ratio Controller regulates 2-stream blending.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Nov 2007 07:44:31 -0500

InSpec 3-term PID controller offers flexible solution for 2-stream controlled rate, or wildstream, blending and analyzer trim applications. Designed with self-tuning algorithm to optimize blending performance at fastest achievable rate, product provides user interface with operator prompting and hot keys to display key parameters or alarms. Up to 20 user-defined recipes can be configured and stored for instant recall, and recipes may also be entered on demand.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Batch Controllers

Safety Controller incorporates numerous input devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Nov 2007 07:42:52 -0500

Model SC22-3 integrates E-stop buttons, interlocking switches, safety light screens, 2-hand controls, safety mats, and rope pulls. It features 22 input terminals that monitor both contact-based and PNP solid-state input devices, and each input circuit is configurable to monitor input signal or provide 24 Vdc sources when needed. Unit meets Safety Integrity Level (SIL) 3 per IEC 62061 and IEC 61508 and Category 4 Performance Level (PL e) per ISO 13849-1.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Machine Tool Controllers | Safety Controls

Operator Panel portably controls machines and processes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 31 Oct 2007 07:44:38 -0500

Weighing 1.3 kg, IP65-rated EXTER M70 features TFT display with 640 x 480 pixels, enabling objects and images to be presented with high level of detail. Handheld unit includes red safety stop on front and can be configured with password-protected security levels so that parameters and actions can be dedicated to password holders. Designed for left- and right-handed use, panel enables connection of cable on either side and has rounded handle for comfortable grip.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Operator Interfaces | Process Controls | Machine Controls

Controller provides multi-axis motion and I/O control.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 19 Oct 2007 07:44:04 -0500

Integrating precision motion with industrial computer capable of autonomous machine control, eZMP SynqNet® Controller supports up to 64 axes of motion and up to 17,000 points of I/O control. Unit includes built-in Ethernet, USB, video, and PCI connectivity. Controller also acts as motion network master for plug-and-play SynqNet amplifiers and I/O devices. It utilizes Windows XPe OS and can be programmed using Visual Basic, C/C++/C#, or other 3rd party software.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motion Controllers | Machine Controls

Remote Controllers suit safety-relevant applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 09 Oct 2007 07:46:57 -0500

Featuring IP67 enclosure rating, Models UE4457 and UE4427 can be mounted on machine using quick-disconnect technology. Remote I/O devices feature 6 dual channel safety-capable inputs that may also function as single-channel inputs, 12 test/signal outputs, and 2 bipolar safety-capable outputs. In addition, Model UE4457 also supports 2 safety data link connections that can be used in conjunction with intelligent safety products.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Safety Controls | Remote Controls