ThomasNet Industrial Newsroom -

Acrylic Sheets are suited for architectural applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 08:11:35 -0500

Designed to reproduce look of upscale, patterned, tempered glass, Acriglas® Clear Impressions series has crystal clarity and can be made with textures on one or both sides of sheet. Textures included are Brushed, Woven Silk, Mesozoic, Precambrian, Box Mini-Flute, Waffle Iron, Techno, and Morning Dew. Offered in standard size of 4 x 6 ft and in thickness ranging from 1/8 to ½ in., sheets can be thermoformed to create custom light fixtures or configured to meet any specification.

This story is related to the following:
Services
Materials and Material Processing

Search for suppliers of: Acrylic Products | Acrylic Plastic Sheet & Sheeting

Machinable Sheet is suited for electronics test applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Aug 2008 07:51:09 -0500

With flexural modulus in excess of 1,400,000 psi and moisture absorption of .10%, Semitron MDS 100 is suited for sockets for semiconductor test and package equipment and fixtures for electronics testing. Offered in thicknesses from .04-.236 in. in sheet sizes of 9.84 and 19.68 in. square, it features coefficient of linear thermal expansion of 1.1 x 10<sup>-5</sup>, and heat deflection, or softening temperature, of 210°C.

This story is related to the following:
Services
Chemical Processing and Waste Management
Materials and Material Processing

Search for suppliers of: Machined Plastics | Heat Resistant Plastic Materials | Plastic Materials | Advanced Materials

Thermally Conductive Polymers can withstand up to 536°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:44 -0500

With ability to dissipate heat, CoolPoly® thermally conductive polymers are suited for wound coils and other electronic components and devices. Including reduced surface and part temperature, injection moldable polymers are designed for applications in molded bobbins and other wound devices such as solenoids, ignition and clutch coils, surface mount coils, and transformers.

This story is related to the following:
Services
Materials and Material Processing

Search for suppliers of: Injection Molded Plastics | High Temperature Thermoplastics | Conductive Polymers

Patterned Glass is custom-made in over 90 styles.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Jun 2008 07:28:11 -0500

Made possible by precision CNC machining and water jet cutting capabilities, Patterned Glass is available in clear soda lime, low iron, and borosilicate from over 90 different styles and can be tempered or laminated for safety glazing. Decorative glass styles include clear, opaque, etched, colored, and mirror. Customizable for all engineering specifications, all glass styles are available for cutting and sizing, hole drilling, polishing, laminating, etching, and UV bonding.

This story is related to the following:
Materials and Material Processing
Services
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Tempered Glass | Glass Specialties | Soda Lime Glass | Seeded Glass | Precision Glass | Patterned Glass | Mirror Glass | Glass Machining | Laminated Glass | Ground & Polished Glass | Glass Fabricating | Etched Glass | Waterjet Glass Cutting | Custom Glass | Colored Glass | Borosilicate Glass | Architectural Glass | Waterjet Cutting Services | Borosilicate Glass Fabricating | Precision Waterjet Cutting Services

Overmolding TPEs adhere to nylon and other resins.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 May 2008 07:58:29 -0500

STK thermoplastic elastomers adhere to polycarbonates (PC), ABS, PC/ABS blends, nylon, HIPS, and copolyesters. Available in 1,000 lb quantities in either natural or black, they feature Shore A range of softness from 50A to 70A and no drying is required. TPEs are suited for wide range of applications such as tools and hardware, housewares/utensil grips, personal care products, safety face masks, home and garden tools, and toys.

This story is related to the following:
Services

Search for suppliers of: Molded Thermoplastic Elastomers

Thermally Conductive Polymers provide no antenna effect.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Apr 2008 07:37:58 -0500

Suited for heat sinks and thermal management solutions, CoolPoly® thermally conductive injection molding grade thermoplastics offer no amplification of electromagnetic or radio frequency interference and no magnetic coupling. E-series is electrically conductive and provides inherent EMI/RFI absorption, while D-series is electrically insulative and produces no signal interference. Features include thermal conductivity of 20 w/mk, thermal diffusivity of 0.1 cm²/sec, and density of 1.7 g/cc.

This story is related to the following:
Materials and Material Processing
Services

Search for suppliers of: Electrically & Thermally Conductive Materials | Conductive Polymers

Etching Machine marks VIN numbers on automotive glass.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Apr 2008 07:34:07 -0500

Portable Model 5150 grit etching machine incorporates wide gun opening that can etch 17 character VIN number using ¼ in. high rubber numbers and letters inserted into fixture mounted on gun head. System comes with sandetcher, rubber numbers and letters, bottle of aluminum oxide grit, safety equipment, and 8 ft air hose. Model 5150 can also be fitted with fixture that holds rubber mask to create 3 x 1 in. marking area.

This story is related to the following:
Services
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Glass Etching | Etching Machinery

Injection Moldable Elastomer forms resiliant vehicle parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Dec 2007 07:44:06 -0500

Designed to automotive engine temperature, fuel, and oil resistance specifications, Silastic® 100% Fluoro Liquid Silicone Rubber (F-LSR) enables parts to operate consistently while in contact with aggressive fuels, chemicals, lubricants, and oils. Parts manufactured with this fully fluorinated, 2-part solution can also withstand temperatures from -60 to +220°C.

This story is related to the following:
Services
Materials and Material Processing

Search for suppliers of: Liquid Injection Molded (LIM) Rubber | Injection Molded Rubber | Elastomers

Pre-Preg Thermoset Composite suits slot cell insulation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Nov 2007 07:42:44 -0500

Composed of electrical grade epoxy resin combined with woven glass substrate, NP511B can be molded in conjunction with abrasion-resistant substrates such as Kevlar(TM) or Nomex(TM) to minimize or eliminate surface wear damage to copper and steel components in generators. Non-brominated resin system offers mechanical strength at temperatures to 170°C. When cured properly, NP511B retains half of its room temperature flexural strength at temperatures to 150°C.

This story is related to the following:
Services
Materials and Material Processing

Search for suppliers of: Prepregs | Thermoset Plastics | High Temperature Composites

Polymer suits injection molding and machining applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Oct 2007 07:52:20 -0500

Tri-Mack Maxton® H-3 is thermoplastic friction/wear material for producing journal- and plane bearings, vanes, seals, thrust washers, piston rings, and related parts. Able to be custom molded and machined with ±.0005 in. tolerance in complex shapes from 1/8 x ¼ in. up to 24 in. dia., material exhibits 26,400 psi flexural strength, 17,800 psi tensile strength, 3.9 psi x 106 flexural modulus, 2.9 W/MK thermal conductivity, and is non-abrasive for use against stainless steel and aluminum.

This story is related to the following:
Services
Materials and Material Processing

Search for suppliers of: Polymers | Thermoplastic Materials

LSR Molding Service can be applied to thermoplastic parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 20 Aug 2007 07:46:12 -0500

Liquid silicone rubber (LSR) used in molding service molecularly bonds with thermoplastic substrate parts. To eliminate handling and assembly of individual rubber and plastic components, tooling and overmolding techniques allow consolidation of silicone rubber and plastic into single composite part. Utilizing LSR's heat and chemical resistance, memory, and biological inertness in form of molecular-bondable material lets designers develop components that meet performance requirements.

This story is related to the following:
Services

Liquid Silicone Rubber suits high-speed manufacturers.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 May 2007 08:09:45 -0500

Designed to require minimal cycle times to accommodate high-speed manufacturers, Silastic® LC-70-2004 liquid silicone rubber (LSR) has 70 shore hardness and is formulated for optimal mechanical properties and clarity. Material meets FDA21 CFR 177.2600 and BfR, XV food contact standards and is suited for precision-production of complex parts. Applied through automated injection, material offers smooth release from mold to help produce complex parts design with optimal consistency.

This story is related to the following:
Chemical Processing and Waste Management
Materials and Material Processing
Services

Search for suppliers of: Silicone Rubber | Liquid Injection Molded (LIM) Rubber

Manufacturing Service offers line-ready custom die castings.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 May 2007 07:35:13 -0500

Providing custom high-pressure/high integrity aluminum and zinc die castings with full machining and component assembly capabilities, Die Casting manufacturing service delivers line-ready assemblies to meet just-in-time requirements. Press capabilities in zinc and aluminum range to 400 and 800 tons clamp force, respectively, while high integrity processes include squeeze casting and semi-liquid casting. Service targets hydraulic, engine, and electrical end product applications.

This story is related to the following:
Services

Search for suppliers of: Manufacturing Services

CNC Machine Tool grinds spheres and aspheres.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 17 Apr 2007 07:47:57 -0500

MicroTol(TM) features configurable work area that is totally enclosed for coolant containment. Standard X-axis travel is 8 in., while standard Z-axis travel is 4 in. Work area consists of a hydraulic chuck supported by Accura(TM)'s hydrostatic work spindle and hydrostatic bearings that provide added damping. The 20,000 rpm air bearing wheel spindle is rigidly mounted to machine base on micro-adjustable column, and grinding is performed with metal bond diamond wheel.

This story is related to the following:
Services
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence

Search for suppliers of: Optical Grinders | CNC Glass Machining | CNC Grinders

Forecasting Reports track consumption of textile products.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 Feb 2007 07:15:27 -0500

DRATEFS forecasting reports track, by volume, value, year, and country, worldwide final consumption of textile products and components they contain, such as fibers, yarns, fabrics, chemicals, and dyestuffs. Reports feature driver-based forecasting model and database with 281 distinct products analyzed into textile components and characteristics. Forecasts can be generated up to 10 yr ahead for up to 210 different countries or regions.

This story is related to the following:
Services

Counter Plate Materials offer precise production tolerance.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 06 Jun 2006 08:21:50 -0500

Used in precision creasing of paper sheets and cardboard, MC704 thermoset composite maintains thickness tolerances and withstands repetitive wear over long periods of time. Counter plates made of this material remain flat and dimensionally stable when subjected to heat and vacuum conditions. Core material provides smooth, mar-free crease when pressed against carton material. Flexible version, MC704MF, is also available.

This story is related to the following:
Services

Search for suppliers of: Thermoset Plastics

Urethane Components have customizable ESD properties.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 13 Feb 2006 07:04:27 -0500

Designed for media-transfer equipment that generates tribocharge through roller or belt friction, Durethane(TM) has conductive properties that are homogeneously modified at molecular level via RoHS-compliant additives at levels from 0.1-1% by weight of total material. Durethane ESD properties are customizable in solid materials from E5 to E10 ohm-cm at hardness of 5 Shore A-70 Shore D and in open- or closed-cell foams from E7 to E10 ohm-cm at hardness of 1A-90A.

This story is related to the following:
Services

Search for suppliers of: Molded & Cast Urethane Products | Manufacturing Services | Plastics Contract Manufacturing

Keyhole Dome Plugs suit standard/custom OEM applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 11 Jul 2005 07:45:13 -0500

Incorporating custom size and shape keyhole openings in domed hole plug, Keyhole Plugs are constructed from polyamide 6/6 nylon that conforms to ASTM standard D-4066-PA111. They lock in place with fingertip pressure, providing seal that withstands up to 35 lb of pushback force. With flammability classification of 94V-2 and ability to tolerate temperatures up to 125°C, plugs are targeted for use in electrical enclosures and housings.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Packaging Products & Equipment
Services

Search for suppliers of: Hole Plugs | Plastic Plugs | Nylon Plastic Fabricating | Polyimide Plastic Fabricating

Thermoplastic Elastomer meets Class VI standards.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Jul 2005 09:46:17 -0500

Offered as extruded tubing or injection molded components, FlexiPrene(TM) pharmaceutical grade TPE (thermoplastic elastomer) may be heat sealed, welded, or sterilized by autoclave, gamma radiation, or EtO. Injection moldable material allows for leak-free connections and eliminates entrapment issues in manifolds and assemblies. Free of silicone oils and animal-derived ingredients, flexible tubing offers resistance to kinking and comes in 3/32-1½ in. OD sizes.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications
Services

Search for suppliers of: Thermoplastic Elastomer Tubing | Molded Thermoplastic Elastomers

Molding Material is offered in halogen-free formulation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Mar 2005 07:06:06 -0500

ISODAMP C-8002 thermoplastic molding material dissipates energy internally, at molecular level, minimizing vibration amplification at resonance to restore equilibrium to sensitive, precision systems. Injection-moldable formulation is environmentally clean, wear-resistant, and adhesive-friendly. Flame-resistant to UL 94 V-0, soft and pliable product is available in custom-engineered configurations or range of standard grommets, mounts, and isolators.

This story is related to the following:
Material Handling and Storage
Mounting and Attaching Products
Services
Mechanical Components and Assemblies

Search for suppliers of: Custom Molded Thermoplastics | Plastic Grommets | Composite Products