ThomasNet Industrial Newsroom -

Permanent Double Coated Tape bonds dissimilar surfaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 23 Jul 2008 08:52:36 -0500

Double coated polypropylene and double coated paper tape products feature thick mass of aggressive adhesive that provides instant bond when applied to difficult surfaces, including low surface energy films. Various substrates can be coated on both sides, and additional substrates can be custom-coated upon request. Used in demanding applications, products are suited for bonding dissimilar or irregular surfaces.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Double Coated Tapes | Polypropylene Tapes | Paper Tapes

Adhesives and Sealants are suited for fuel cell assembly.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Jul 2008 08:01:09 -0500

Structural adhesives for metal/plastic bonding, threadlockers, thread sealants, seam sealants, and general-purpose adhesives are designed for micro- to large-size, stationary or portable fuel cell applications. Resistant to acids, coolants, and chemicals, these products are formulated to deliver gas-tight seal on components and stacks. Membrane electrode assembly (MEA) adhesives and sealants bond bipolar plates, seal MEAs, and seal between bipolar plates and end plates.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Thread Sealants | Adhesive Sealants | Structural Adhesives | Threadlockers

Bonding Material accommodates ultrathin wafers.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Jul 2008 07:41:38 -0500

Exhibiting bonded pair rigidity and thermal stability, Brewer Science WaferBOND(TM) HT-10.10 bonds fragile device wafers to rigid carriers to allow thinning and subsequent processing to create through-silicon vias (TSVs). This spin-on polymeric temporary wafer bonding material is resistant to solvents, acids, and bases. Device structure planarization with total thickness variation of less than 0.5 µm on 10 µm coating permits thinning to 50 µm and beyond.

This story is related to the following:
Materials and Material Processing
Paints and Coatings Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Semiconductor Materials | Semiconductor Material Protective Coatings | Bonded Coatings | Metal Bonding Adhesives

Ceramic Adhesive withstands up to 2,500°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:29 -0500

Ceramabond(TM) 685N is single part, dispensable, zirconium silicate based adhesive and sealant system that is used to bond ceramic honeycombs to metal frames used in construction of gas-fired ceramic radiant heaters. Thixotropic, water-dispersible, and fast-setting paste contains no asbestos or VOCs, and exhibits tensile-shear strength of 500 psi and linear shrinkage of less than 2% after curing. It is available in pint, quart, gallon, and 5 gal pails.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Adhesive Sealants | Metal Bonding Adhesives | Ceramic Adhesives | High Temperature Adhesives | Bonding Compounds

Epoxy Adhesive Paste resists high temperatures.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 07 Jul 2008 07:38:30 -0500

Formulated to cure at room temperature, 2-component Supreme 11AOHT can be applied without sagging or dripping. It has mixing ratio of 1:1, operating temperature of -100 to +400°F, thermal conductivity of 10 BTU/in/ft²/hr/°F, and dielectric strength of greater than 400 V/mil. Suited for applications involving thermal cycling, product adheres to most metals, ceramics, glass, rubbers, and plastics. Bonds are resistant to water, oil, and most organic solvents.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: High Temperature Adhesives | Epoxy Adhesives

Adhesive gels within 45 sec and is cured within 5 minutes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Jun 2008 07:37:36 -0500

Formulated for general purpose bonding, Type EP50-1 produces high strength bonds with more than 2,000 psi at room temperature that are resistant to thermal cycling and chemicals including water, oil, and organic solvents. Suited for metals, glass, ceramics, wood, and vulcanized rubbers, product is approved for service over temperature range of -60 to more than 250°F. It comes in premeasured, flexible divider pouches, disposable cartridges, and in pint, quart, gallon, and 5 gal containers.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Ceramic Adhesives | Glass Adhesives | Wood Adhesives | Epoxy Adhesives | High Temperature Adhesives | Metal Bonding Adhesives

Condensation Cured Silicone withstands temperatures to 400°F.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 07:37:28 -0500

With 2.2 Btu-in./hr/ft²/°F thermal conductivity, Master Sil 150 is 2-part, condensation cured liquid silicone system which can be used for potting and encapsulation. It features Shore A hardness of 40, 230% elongation at break, 11 x 10<sup>-4</sup> cm/cm°C thermal expansion, and less than 0.4% linear shrinkage. Able to protect sensitive electronic components/assemblies from dust, moisture, ozone, thermal shock, and vibration, product cures in contact with virtually all types of materials.

This story is related to the following:
Materials and Material Processing
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Potting Compounds | Encapsulation Compounds | Thermally Conductive Adhesives | Silicone Adhesives | High Temperature Adhesives

Hot Melt Adhesives come in finger-sized packages.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:17 -0500

Designed to replace sticky cavity packaging and associated plastic waste, select Technomelt® Adhesives come in packets that load directly into dispensing tank where packet's dry outer casing melts with adhesive. Available in EVA, polyolefin, and pressure sensitive technologies, adhesives are used to manufacture filters, packaging, pressure sensitive adhesive films, insulation, textiles, vehicles, and structures.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Hot Melt Adhesives

Instant-Cure Cyanoacrylate Adhesive forms strong bonds.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jun 2008 07:45:47 -0500

Formulated to produce bonds with shear as high as 2,800 psi, MB297 is supplied as viscous liquid adhesive with viscosity of 2,000-2,400 cps at 20°C. Colorless solution, resistant to effects of extreme humidity, has refractive index of 1.48 and service operating temperature range of -65 to 185°F. Cures are moisture activated, and bonds are instantaneously formed with glass, metals, ceramics, plastics, and elastomers. Shore A hardness is 85.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Instant Adhesives | Cyanoacrylate Adhesives

Adhesives suit folding carton and glued lap applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 13 Jun 2008 07:45:20 -0500

VelocityP3(TM) 33-711A and 33-711B multi-purpose non-contact extrusion adhesives provide fiber-tearing bonds on all substrates. Type 33-711A offers high pressure of 600 cps, while Type 33-711B offers low pressure of 300 cps. Solvent free, low-VOC adhesives have above average heat and cold resistance, and support machining, allowing clean cut-off and restart recovery. They are compatible with extrusion systems from Bobst, HHS, Valco, Nordson, and Pafra.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Packaging Adhesives | Industrial Adhesives | Adhesives

Tape Layer suits composite production and part conversion.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Jun 2008 07:43:07 -0500

Designed for aircraft/aerospace industry, CHARGER(TM) Series of automated small flat tape layers with bed-type configuration are used in production of long narrow flat parts, nested multi-part laminates, and drape-formed skins. Enabling transition from metal to composite structures and from hand lay-up to automated tape lay-up, it features CM100 computer control. Tape layer produces laminates up to 47 in. wide on standard width machine and up to 100 in. wide on wide version platform.

This story is related to the following:
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Laminated Tapes | Aircraft Tapes

Pressure Sensitive Adhesive Products suit medical market.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Jun 2008 07:43:03 -0500

Products in Electrofix line are single-coated with medical grade acrylic adhesives in varying tacks and remove easily without leaving residue. They are supplied on range of flexible and conformable foam, film, non-woven, and laminate backings with heavy-duty glassine release liners. Dimensionally-stable and suitable for high speed conversion and die-cutting, products are available in white finishes or as clear polyethylene films. Other colors, including tan, are available on request.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Medical Device Adhesives | Pressure Sensitive Adhesives | Pressure Sensitive Products Adhesives | Medical Adhesives

UV Adhesive is USP Class VI approved for medical devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Jun 2008 07:28:23 -0500

Suited for metals, glass, ceramics, and most plastics, optically clear UV10MED is 100% reactive and does not contain solvents or other volatiles. One-part adhesive has cure times ranging from 5-10 sec upon exposure to UV lamp to 2-3 minutes at ambient temperatures. Service operating temperature range is -60 to 250°F, and low viscosity UV10MED exhibits tensile strength greater than 4,000 psi, shore D hardness greater than 60, and elongation of less than 5%.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Medical Device Adhesives | Optically Clear Adhesives | Ultraviolet (UV) Adhesives

Acrylic Adhesive promotes assembly, laminating productivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 03 Jun 2008 07:42:13 -0500

Designed for use by OEMs, FFVSA exhibits optimal grab and holding power when applied to wood, painted surfaces, and plastics. It is .005 in. thick, comes in widths from 3/16-54 in., and resists damage from water, humidity, and UV rays. Offered on 180 yd long standard rolls, product is suited for splicing fabric, film, and foil; laminating nameplates, metal, foams, and fabrics; as well as general-purpose mounting and holding.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Chemical Processing and Waste Management

Search for suppliers of: Adhesive Tapes | Acrylic Adhesives

Light-Curing Adhesive suits needle bonding applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Jun 2008 07:43:35 -0500

Designed for bonding syringes and other stainless steel cannula to polycarbonate, PVC, glass, and polypropylene hubs, MD® Medical Device Adhesive 1162-M produces clear bonds and has low viscosity for air-free dispensing into needle hub cavities. Capable of curing upon exposure to UV/visible light, it is designed for high-speed and high-volume automated syringe assembly. For in-line inspection, adhesive fluoresces blue under low-intensity black light.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Material Handling and Storage

Search for suppliers of: Medical Device Adhesives | Metal Bonding Adhesives | Ultraviolet (UV) Adhesives | Adhesive Dispensing Equipment

Dipping Paste combines solder spheres and flux vehicle.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:55 -0500

Comprising of Sn96.5/Ag3.0/Cu0.5 with solder powder size of 4-24 microns, LFM 48 N paste suits package warpage and package-on-package fluxing applications during reflow. Paste delivers consistent dipping transfer characteristics coupled with strong tack performance to hold large devices firmly in position on high speed Pick and Place systems. It features designed Open Time in dipping tray of 8 hr (at 23°C and 50% RH) and up to 8 hr process window time between dipping and reflow.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments
Materials and Material Processing

Search for suppliers of: Adhesive Paste

UV Curable Adhesive targets medical device manufacturing.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:47 -0500

Adhering to metals, glass, ceramics, and most plastics, optically clear UV10MED is USP Class VI approved, resistant to chemicals and sterilants, and has service operating temperature of -60 to 250°F. Product is 100% reactive and does not contain any solvents or other volatiles. Curing in 5-10 sec with UV lamp and 2-3 min at ambient temperatures, UV10MED offers tensile strength greater than 4,000 psi, Shore D hardness greater than 60, and less than 5% elongation.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Adhesives | Medical Device Adhesives

Adhesive protects windows from impact.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:24 -0500

Applied around frame, 3M(TM) Impact Protection Adhesive bonds glass, window film, and frame together, protecting against severe weather damage, bomb blasts, or intruders. Combined with 3M Ultra Safety and Security Window Film, adhesive offers various levels of protection. Level 1 holds shards of glass together, while Level 2 creates stronger barrier to keep unwanted elements out. Level 3 incorporates gasket-style 3M Impact Protection Profile, which bonds filmed window and frame using 3M VHB tape.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Window & Door Adhesives

Transfer Adhesive attaches membrane to structural framing.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:09 -0500

For structural and decorative use, Unifilm® U802 is used to attach architectural tension membranes to wide array of metal frames. Product laminates to variety of substrates including low surface energy plastics and untreated polyolefins. It provides high initial adhesion and builds to peel strength of 149 oz/in. Able to withstand environmental extremes, acrylic transfer adhesive offers UV, humidity, chemical, and temperature resistance.

This story is related to the following:
Chemical Processing and Waste Management
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Acrylic Adhesives | Transfer Adhesives | Structural Adhesives | Construction Adhesives

Transfer Tapes have planetary or spool wound configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 27 May 2008 07:17:04 -0500

Line of transfer tapes includes 1-4 mil unsupported transfer tape; up to 10 mil double coated tape with polyester, non-woven or paper support; and paper or poly liners either flood coated or extended, with or without print. Tapes are manufactured with adhesives ranging from general purpose permanents and removables to specific applications requiring LSE or HSE formulations.

This story is related to the following:
Adhesives and Sealants Sponsored by: Henkel Corp. - World Leader in Adhesives, Sealants & Surface Treatments

Search for suppliers of: Double Coated Tapes | Paper Tapes | Polyester Tapes | Transfer Tapes