ThomasNet Industrial Newsroom -

PLC Module controls company's MAC motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:27:54 -0500

With 8 digital inputs, 4 digital outputs, and 1 analog input, Nano-PLC module is compatible with all JVL MAC motors and suited for stand-alone solutions or as intelligent slave in larger systems. It includes multi-operator calculator for motor registers and variables, branching feature with conditional code-line jump, and 16 command types in addition to Remarks and Binary Commands. There are 3 hardware models available: with SubD connector, cable glands, or M12 connectors.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Programmable Logic Controllers (PLC) | Motor Controllers

I/O Module features 18 digital inputs and CAN output.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Jul 2008 07:42:27 -0500

Operating on 12 V or 24 Vdc input, Model AX030300 features IP67 packaging and connectors for harsh environments. Ten digital inputs are user-selectable as active high/active low, while 8 digital inputs are user-selectable as active high/active low, disable input, PWM signal, pulse, or counter. Equipped with Windows-based Electronic Assistant(TM) for configuration, saving, and writing settings, AX030300 is suited for engine controls for power generation, co-generation, and stationary power.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Digital Controls | I/O Modules | Engine Controls

Soft Starter facilitates energy efficient induction motor operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Jul 2008 07:41:27 -0500

Based on DSP control, WEG SSW07 soft starter provides both low inertia start and high breakaway torque load start, and limits initial voltage drop while avoiding high current spikes or inrush current. Built-in bypass minimizes power losses and heat dissipation in thyristors and operates at ambient temperatures up to 55°C without down grading or current reduction. With 1.3-5 kg weight, unit is available in sizes ranging from 162-276 mm high, 95-223 mm wide, and 157-220 mm deep.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Soft Start Motor Starters

AC Motor Speed Controls drive inverter-duty gearmotors.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jul 2008 07:29:54 -0500

Operating from single-phase 115 or 208/230 Vac line voltage, Pacesetter(TM) 2994 and 2998 ac motor speed controls can drive 230 Vac, 50 or 60 Hz, inverter-duty, 3-phase gearmotors and motors ranging from 1/8 to 1 hp. Model 2994 features multifunction keypad, 4-digit LED display, 6 LED indicators, on/off switch, and speed potentiometer. Housed in NEMA-1/IP40 enclosure for basic environmental protection, Model 2998 is UL and CE certified with built-in RFI (EMI) filter.

This story is related to the following:
Controls and Controllers

Search for suppliers of: AC Drives | Motor Speed Controls | Variable Speed Motor Drives

Digital DC Drives are available up to 1,050 A.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 02 Jul 2008 07:49:12 -0500

Offered with both 2 and 4 Quadrant options, PL/X range of 12-1,050 A digital dc drives include 40 character alphanumeric backlit displays, range of software blocks, and fully controlled field for extended speed range. They offer range of communications that support motor control applications. Compact units are UL, cUL, and CE approved.

This story is related to the following:
Controls and Controllers

Search for suppliers of: DC Drives

Bus Terminal controls speed of single-phase AC motor.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jul 2008 07:38:35 -0500

Suitable for drives with quadratic load characteristics such as fans and pumps, Model KL2791 Bus Terminal I/O system enables direct connection of small, 1 A, single-phase motors rated 120 V, 60 Hz, in order to achieve setting range for flow rate from 10-100%. Set value for motor speed is specified by 16-bit value, and motor is switched on and off with mains synchronous pattern. Compact speed controller comes in standard bus terminal housing with width of 12 mm.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Motor Speed Controls | Bus Controllers | I/O Controllers | Motor Controllers

Press Brake Control System facilitates input and operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jun 2008 07:31:56 -0500

Used on PPEB and Easy-Form series press brakes, CADMAN® Touch combines CNC technology and IR touch screen programming system running on Windows® XP embedded PC-based control unit. It works with LVD integrated intelligent bending database and on-board LVD CADMAN-B 3D (bending) software, creating and storing interactive integrated databases for bend allowance, angle corrections, and spring-back. GUI minimizes control input, lessening steps between drawing to completed part.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Controls and Controllers

Search for suppliers of: Press Brakes | Brake Controls

Positioning Stages offer ball screw drive decoupling system.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 07:37:27 -0500

Utilizing mechanical cross roller bearings for decoupling of ball screw drives, PMT 160 series stages achieve straightness and flatness runout of 50 nm or less. Decoupling system isolates any transverse movement of ball screw from linear bearing system and saddle of stage. Stages offer travel from 50-300 mm, with standard positioning accuracy of less than 10 µm and repeatability of ±0.5 µm when driven by dc servomotor or dc stepper motor.

This story is related to the following:
Controls and Controllers
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: DC Drives | Linear Motor Driven Stages | Precision Ball Screws | Positioning Stages

PCB-Mounted Servo Drive enhances multi-axis designs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Jun 2008 07:37:26 -0500

Accelnet-Micro servo drive, mounted directly onto OEM circuit boards, works in range of system architectures and is compatible with various feedback devices. Along with built-in camming and electronic gearing capability, product offers several standard command interfaces. Drive exploits Copley Virtual Machine capability in stand-alone mode, enabling it to function as system controller. Solution delivers 6 A peak @ 90 V for brushless and brush-type servo motors.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Servo Drives

Motor and Drive offer efficiency better than NEMA Premium.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:20 -0500

With outputs from 20-200 hp, WMagnet Motor/Drive Packages offer efficiencies of 95-97%. Motors use rare earth permanent magnets in rotor to limit temperature rise during operation. Utilizing vector control technology algorithm, CFW-09 drive enables control without use of encoder/position sensor. As synchronous motor, WMagnet cannot be started directly from power supply because accurate synchronization of supply waveforms with rotor position is continuously required.

This story is related to the following:
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors
Controls and Controllers

Search for suppliers of: Synchronous Motors | Permanent Magnet Motors | Vector Drives | Motor Drives | Variable Speed Motor Drives

Frequency Converter is optimized for use within wind turbines.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 19 Jun 2008 07:44:42 -0500

Model ACS800-77LC transfers AC power from turbine generator through to utility or transmission switchgear. Frequency converter is available for full converter systems with permanent magnet or asynchronous generators as well as for doubly-fed asynchronous generators covering powers up to 5 MW. Power-converting components and controlling electronics are liquid-cooled and enclosed in cabinet with no air inlet or outlet openings for protections from dust, salt, and extreme temperatures.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: AC Drives | Frequency Converters

Stepper Motor Controller is IP20-rated.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jun 2008 08:00:51 -0500

Designed for X20 controller and I/O system, X20 stepper motor controller features 4 inputs for end switches/encoders, and automatic motor detection when booting and stall detection that identifies overload situations or any unwanted blocking of motor. Stepper motor connections can resolve each full step into up to 256 microsteps. Offering integration with Automation Studio and Soft CNC, unit is designed for bipolar 2-phase stepper motors, 1 A (24 V) or for 3 A (18-48 V) rated current.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission Sponsored by: BALDOR - Energy Efficient Electric Motors

Search for suppliers of: Stepping Controls | Stepping Motors | Motion Controllers

Motion Control System suits precise multi-axis applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Jun 2008 07:43:05 -0500

Designed to meet machine builders' current automation needs, TMC-3D combines 8-axis motion controller and digital servo drive in same unit. Based on MotionChip(TM) technology, it controls (via CAN-bus) up to 8 Technosoft intelligent drives (including itself). Embedded servo drive is designed for dc, brushless, and step motors up to 640 W. Controller generates 3D and 2½-D trajectories and sends reference to slaves as PVT (position, velocity, time) points via CAN-bus.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motion Control Systems | Multi-Axis Controls | Servo Drives

VFDs power medium voltage, 500-4,500 hp motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Jun 2008 07:28:23 -0500

Delivered in self-cooled IP41/NEMA 1 enclosure, MVW-01 family offers variable speed control solution for medium voltage motors powered from 2,300, 3,300, and 4,160 Vac mains in high volume pumping, mixing, and milling applications. Multiprocessing control architecture is powered by 32-bit processor with 64-bit bus and floating point capability. Users can specify 12- or 18-pulse input rectifier configuration that provides high power factor to meet IEEE-519 standards.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Variable Frequency Drives (VFD) | Variable Speed Drives

Adjustable Speed Drives offer Ethernet communications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 29 May 2008 07:40:20 -0500

Models AC890 and AC890PX are available with 7 protocols, including Ethernet/IP and Modbus/TCP cards, which plug into option slot and can be configured with DSE Lite software. Compatible with AC890 firmware v3.2 and later, cards deliver Ethernet communication options that facilitate networking on factory floor. Cards also work with DSE Lite, DSE890, and DSD software as well as FireWire 1394B and Windows Vista(TM).

This story is related to the following:
Controls and Controllers

Miniature Servo Drive delivers up to 5 kW continuous power.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 May 2008 07:47:39 -0500

Included within ExtrIQ Extended Environmental Conditions product line, The Hawk is suited for military and extended environmental conditions with ambient temperature operating range of -40 to +160°F; mechanical vibration ratings from 20-2,000 Hz, 14.6 g; altitude qualifications from -1,000 to 510,000 ft; and ±20 g mechanical shock resistance. Solution can operate in position, velocity, and current modes and offers range of feedback and I/O options.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Servo Drives

Motion Controller drives ceramic servo motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 23 May 2008 07:41:12 -0500

Combining high performance motion controller with 1 or 2 axes of Nanomotion drivers, Flex DC is supported with easy to use GUI for machine set up and tuning. The 8 kHz control seamlessly integrates into any FB series linear or rotary stage and is provided in stand alone package or with rack mounting kit. Optional sine/cosine encoder input allows for high resolution motion control.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motion Controllers | Motor Controllers

Power Modules drive 2-phase switched reluctance motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 21 May 2008 07:43:05 -0500

Separately supplied in 45 x 28 mm SIP package, SRM-SPM® power modules FCAS20DN60BB and FCAS30DN60BB both integrate 2 HVICs, one LVIC, 4 NPT IGBTs, 4 FRDs, 2 bootstrap diodes, one thermistor, and various protection functions. RoHS-compliant products utilize Pb-free terminals and are designed for driving 2-phase switched reluctance motors (SRM) in small-motor applications such as vacuum cleaners. Moisture sensitivity meets Pb-free reflow requirements of IPC/JEDEC standard J-STD-020.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Controls and Controllers

Search for suppliers of: Power Modules | Motor Drivers

AC Drives are designed to handle VFD applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 16 May 2008 07:35:08 -0500

Offered with power range from 15-30 hp for VFD applications, SMVector NEMA1 drives incorporate programmable digital input, terminals for RS-485 communications, and keypad. They also offer capability to wire RS485 directly into drive and give users immediate access to drive operation if external control is removed. Featuring 4 modes of operation, auto-tuning products deliver dynamic speed regulation and accept input from 120 Vac, 1-phase to 600 Vac, 3-phase.

This story is related to the following:
Controls and Controllers

Search for suppliers of: AC Drives

Controller operates piezo stepping linear motors.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 15 May 2008 07:39:17 -0500

Designed for setup and automation of NEXACT® linear motors, Model E-861 provides open and closed-loop modes. For closed-loop operation, high-resolution linear encoder input is provided, backed up by required DSP processing power. For open-loop-operation, step size, count, and frequency can be set by software. Velocity of 10 mm/s and more with nanometer resolution is obtained. Up to 16 controllers can be networked and controlled over single PC interface.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motor Controllers