ThomasNet Industrial Newsroom -

Cable carries Fieldbus Foundation certification.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Sep 2008 07:23:50 -0500

Featuring round and smooth jacket that facilitates secure installation in cable glands, DataCELL FOUNDATION fieldbus cable is FF-844 certified by Fieldbus Foundation(TM). All versions are ITC (instrument tray cable)/PLTC (power-limited tray cable) rated for exposed-run applications and pass crush/impact tests for metal-clad cable under UL 1569. Single-pair or multi-paired bus cables, offered with as many as 12 pairs in one cable, are available with multiple shield options.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Controls and Controllers

Search for suppliers of: Shielded Cables | Instrument Cables Support Tray Systems | Instrumentation Cables | Fieldbus Cables | Cables | Fieldbus Components

USB 2.0 Flash Media Readers promote throughput, flexibility.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 Jul 2008 07:43:36 -0500

Suited for consumer electronics and computing applications, USB2240 and USB2250 Hi-Speed USB 2.0 controllers offer read and write support for 24 Flash media formats and help reduce bottlenecks with throughput speeds to 35 Mb/s. Series USB2240 uses multiplexed Flash media interfaces in 36-pin QFN package, while USB2250 comes in 128-pin VTQFP and supports simultaneous access to different Flash media formats. Both fully integrated, single-chip solutions support -40 to 85°C operation.

This story is related to the following:
Computer Hardware and Peripherals
Controls and Controllers

Search for suppliers of: Bus Controllers | Memory Controllers

PXI Controllers offer 20, 50, or 80 MHz performance.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:27:57 -0500

Incorporating normally external SCANFLEX® transceivers into 1 slot/3U unit, SCANFLEX® SFX/PXI1149/C4-FXT Boundary Scan Controllers feature ADYCS(TM) II propagation delay compensation and dynamic HYSCAN(TM) data splitting. TAP interface cards are linked externally, and 4 auto-identified TIC types are available. Differential signal interface ensures secure transmission of TAP signals, even through multiple interconnections and with over 4 m of cable length, maintaining TCK clock frequency up to 80 MHz.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Communications Controllers | Bus Controllers

Bus Terminal controls speed of single-phase AC motor.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jul 2008 07:38:35 -0500

Suitable for drives with quadratic load characteristics such as fans and pumps, Model KL2791 Bus Terminal I/O system enables direct connection of small, 1 A, single-phase motors rated 120 V, 60 Hz, in order to achieve setting range for flow rate from 10-100%. Set value for motor speed is specified by 16-bit value, and motor is switched on and off with mains synchronous pattern. Compact speed controller comes in standard bus terminal housing with width of 12 mm.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Motor Speed Controls | Bus Controllers | I/O Controllers | Motor Controllers

Junction Bricks connect multiple devices on fieldbus trunk.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 21 May 2008 07:43:16 -0500

Vertical mount JRBS junction bricks for FOUNDATION fieldbus(TM) are available with 4, 6, 8, 10, or 12 ports and feature removable terminals located on both sides of brick. Units provide short circuit protection for all ports, as well as visual status with bright LED indicators located on each spur. DIN-mounted vertically or horizontally, they are also available with optional overmolded, pluggable terminating resistor for use with 3-pole terminal blocks.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Fieldbus Components

Decentralized I/O Platform combines safety and control.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Mar 2008 07:49:42 -0500

PSSuniversal consists of head module, which undertakes all communication and processing functions, and base modules, connected to head modules, used for installing electronic modules as well as connecting I/O signals. Up to 64 components, each consisting of one base and one electronic module, may be operated per head module. Combining intelligent safety and standard control functions, system is established automatically; included software tool facilitates setup.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Profibus I/O Multiplexing Distributed Control Systems | I/O Modules | I/O Controllers

FOUNDATION Fieldbus Temperature Transmitter is bus-powered.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Dec 2007 07:44:48 -0500

Requiring 10.5 mA to operate, programmable Model TFZ allows up to 32 field devices (126 with repeaters) to be networked onto one FOUNDATION Fieldbus H1 segment. It has 20-bit input resolution, RFI/EMI protection, ambient temperature compensation, and operates in -40 to +85°C temperatures. Rated NEMA 4X/IP66, TFZ can be set from control room over segment wiring to handle 14 RTD types, 9 thermocouple types, as well as direct mV and resistance/potentiometer inputs.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Fieldbus Components | Programmable Transmitters | Temperature Transmitters

Power Hub suits fieldbus applications requiring redundancy.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 22 Oct 2007 07:52:22 -0500

FieldConnex® High Density (HiD) Power Hub includes motherboards and power supplies that use 25 V to supply 360 mA load output. They offer heat dissipation of less than 2 W, and can be mounted in any direction. Choice of motherboards exist to fit any control system, and can be pre-installed using connectors with retaining screws or tailor-made versions with system plugs of DCS. Two power supply modules are load sharing, and can be plugged into motherboard's sockets when system is energized.

This story is related to the following:
Computer Hardware and Peripherals
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Motherboards | Fieldbus Components | Power Modules | Modular Power Supplies

I/O Stations integrate I/O into PROFIBUS-DP networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jul 2007 07:43:34 -0500

Suited for pharmaceutical, chemical, and material handling industries, FDP20 I/O Stations are available in versions with 16 inputs, 16 inputs/outputs, and 8 inputs paired with 8 inputs/outputs. Glass-filled nylon housing with integrated DIN-rail connector provides IP 20 protection and makes stations suitable for integrating I/O in existing panels onto PROFIBUS. Nine-pin female D connector provides connection to PROFIBUS-DP, and all power is derived from separate power source.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Profibus I/O Multiplexing Distributed Control Systems

I/O Expansion Boards are suited for embedded designs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 17 Jul 2007 07:48:39 -0500

Available for standard and custom functions, RoHS-compliant Serial Peripheral eXpansion(TM) (SPX(TM)) modules implement SPI Bus that operates on 14-pin interconnect cable. Offerings include 8-channel analog input module, CANbus controller, 4-channel analog output module, TTL I/O port expansion, and 8-channel solid state switch. Up to 4 SPX modules, of identical or different functionality, can be used per system (bolted to host board or located up to 2 ft away).

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: I/O Modules | Bus Controllers

Diagnostics Module analyzes fieldbus physical layer .

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 May 2007 07:45:33 -0500

Designed for FOUNDATION Fieldbus H1 and PROFIBUS PA installations, Mobile Advanced Diagnostic Module provides exact segment and individual device data needed for fieldbus physical layer analysis without need for permanent connection. Passive input circuits and external power supply leave physical layer untouched. Also included, Diagnostic Manager offers commissioning wizard, alarming and data logging, and built-in oscilloscope for displaying in-depth detail of fieldbus signals.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Fieldbus System Controls | Diagnostic Instruments | Diagnostic Equipment & Supplies

USB Controllers promote industrial connectivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Apr 2007 07:36:38 -0500

Both MCF5221x MCUs with Full-Speed USB On-The-Go (OTG) and MCF5253 embedded processor with Hi-Speed USB OTG come with USB software stack, enabling developers to streamline design process. USB OTG gives option of using on-chip USB module as USB device or USB host. It also allows multiple USB devices to communicate without host interface. Integrating USB transceivers on chip, 32-bit ColdFire® USB devices provide integrated embedded control for designers who need USB connectivity.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Bus Controllers

USB to GPIB Controller Module helps run test programs.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 28 Feb 2007 07:55:51 -0500

Used for controlling test instruments and collecting data, Model 488-USB2 converts any PC with USB 1.1/2.0 interface into full-function, IEEE 488.2-compatible bus controller. Plug-and-play device operates from any open GPIB connector and has 1 MBps data rate. Along with 488.2V3 Driver Library that supports up to 16 GPIB Controllers, product comes with Explorer utility that automatically locates, displays, and configures GPIB controllers and devices in system.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Bus Controllers

Power Conditioner is designed for Fieldbus(TM) H1 networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Dec 2006 07:43:29 -0500

Available in simplex (non-redundant) and duplex (redundant) models, FPS200 TRUNKGUARD Fieldbus Power Conditioner provides conditioned power in general purpose and non-incendive applications. Simplex configuration allows up to 8 modules to be installed on single DIN-rail carrier, with each module providing 350 mA at 26 V of isolated power, fully compliant with FF831-1 specification. Duplex configuration provides redundant, load-sharing, and hot-swappable power conditioners.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Power Line Conditioners | Fieldbus Components

Device Coupler is designed for hazardous area applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 31 Oct 2006 07:42:09 -0500

ATEX-certified TG300 TRUNKGUARD Device Coupler connects FOUNDATION Fieldbus H1 or PROFIBUS PA fieldbus devices in flameproof Zone 1 and 2 locations. Available in 4 or 8 fieldbus device models, coupler can accommodate additional field devices and link with other units to power as many devices as segment can support. TG300 has short-circuit protection, Automatic Segment Termination, and LED status indicators.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Couplers | Fieldbus Components

Module monitors fieldbus installations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Oct 2006 07:41:58 -0500

Suitable for FOUNDATION Fieldbus and Profibus installations, Advanced Diagnostic Module for FieldConnex® Power Hub generates network documentation for each segment and device and controls fieldbus by monitoring physical layer. Built-in oscilloscope can be set to trigger on numerous events, allowing maintenance personnel to pinpoint fault locations from control room utilizing Device Type Manager. During commissioning, ADM makes snapshot of communication quality for trending changes over time.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Network Monitors | Fieldbus Components

Redundant Fieldbus System helps avoid process shutdown.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 06 Oct 2006 07:46:12 -0500

Providing redundancy and automatic switchover in case of segment fault, TRUNKSAFE(TM) fieldbus system helps prevent loss of segment and potential process failures. Unit consists of 2 redundant TPS200 fieldbus power conditioners, 2 fieldbus cables, and 1 TS200 fail-safe device coupler to handle 6 or 10 fieldbus devices. System also offers hard-wired alarm to alert plant operators about cable fault, while LEDs indicate exactly which cable and what type of fault has occurred.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Industrial Process Alarms | Fieldbus System Controls

Power Supply meets single-segment power requirements.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Sep 2006 07:40:37 -0500

Supporting redundant 24 V power, Model KLD2-FBPS-1.25.360 galvanically isolated Foundation Fieldbus power supply provides 25 V and 360 mA of supply current with minimal heat dissipation, allowing modules to be mounted adjacent to one another without concern for spacing. Passive power conditioning (signal filter) makes it suitable for single segment power needs, and it supports connection to mobile advanced diagnostic module for physical layer diagnostics.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Fieldbus Components | Redundant Power Supplies

I/O System provides Profibus connectivity.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Sep 2006 07:40:34 -0500

Suited for applications where in-cabinet mounting, high-density I/O count, and modular design are required, IP20 BradControl(TM) Block I/O System connects industrial I/O devices to PLC or PC controller over industrial network. It is comprised of network adapter and up to 32 expansion modules mounted in enclosure. Ribbon cable-based expansion bus, which handles inter-module communication, operates at 11 MBaud and can accommodate up to 10 groups of modules.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Profibus I/O Multiplexing Distributed Control Systems

Bus Controller is based on ETHERNET Powerlink.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 28 Aug 2006 07:43:29 -0500

Comprised of base module, power supply module, and fieldbus interface, 1.5 in.-wide X20 bus controller enables real-time Ethernet cycle times of 200 µs. Entire bus-independent backplane can be preinstalled, and 2 RJ45 interfaces make daisy chain wiring possible. To transfer or receive I/O data on fieldbus, bus controller works by configuring fieldbus master and does not need to be programmed. Product is fully synchronized to network and all axes connected to it.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Bus Controllers | Communications Controllers