ThomasNet Industrial Newsroom -

Drying System dries solvent and water-based inks.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 02 Jul 2008 07:38:28 -0500

Featuring flat or vertical design, Sheet and Web Contact Drying System thoroughly dries wet inks from material surface to top side, avoiding residual moisture problems. System uses heated vacuum plate with transport belt on bottom of material being dried. Integrated heated air blower furthers drying process and helps eliminate solvent fumes. With system, screen printed materials that previously required 2 hours to dry can be dried within 30 seconds.

This story is related to the following:
Chemical Processing and Waste Management
Textile Industry Products

Search for suppliers of: Web Dryers | Ink Dryers

RF Web Drying System can operate at speeds up to 1,500 fpm.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 Jul 2008 07:38:42 -0500

Designed for high-speed drying of water-based patterned glue and coatings, Macrowave(TM) RF Drying System selectively heats only patterned coatings on web and leaves bound moisture in substrate intact, preventing over-drying, distortion, and shrinking. It needs 1/3 to 1/5 of floor space required for hot air and IR dryers, and permits lower web temperatures. Unit can handle webs up to 120° wide and meets OSHA safety regulations and FCC standards on communication non-interference.

This story is related to the following:
Chemical Processing and Waste Management
Textile Industry Products

Search for suppliers of: RF Dryers | Textile Dryers

Compact Dryer can handle up to 600 lb of product/hr.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Jun 2008 07:39:38 -0500

Able to remove moisture to enhance shelf life of fresh-cut produce, Compact Dryer is suited for small to medium volume fresh-cut processors producing variety of products such as shredded and chopped lettuce, leafy salad mix, cabbage, and cut vegetables. Designed to withstand harsh, hot water washdowns, stainless steel unit can be sanitized inside and out, and features magnetic lock with smooth profile. With footprint of 23 x 38 x 30 in., it fits into most plant environments.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Food Processing and Preparation
Chemical Processing and Waste Management

Search for suppliers of: Vegetable Processing Machinery | Food Processing Machinery | Food Processing Equipment | Food Dryers | Vegetable Dryers | Moisture Control Dryers

Dewatering-Drying system removes oversize/undersize particles.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 May 2008 07:40:08 -0500

Model K30-2-SS 30 in. dia circular vibratory screener integrated with Model K40/48-1FBD-SS 40 in. dia circular fluid bed dryer remove off-size particles while dewatering and drying on-size material. System removes up to 50 gpm of water and dries up to 700 lb of on-size particles per hr. Screener is equipped with imbalanced-weight gyratory motor that vibrates screening chamber, which is suspended on springs. Circular fluid bed dryer requires only one air inlet and outlet.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Dewatering Equipment | Drying Systems | Fluid Bed Dryers | Dewatering Screens | Vibrating Screens

Dryer System delivers contaminant-free compressed air.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 07 May 2008 07:37:16 -0500

In conjunction with large air compressors and systems, SKF® SFD dryer system dries compressed air for pneumatic applications directly from tank. Compact device incorporates 3-in-1 system to remove oil, contaminants, and moisture, operating up to 175-200 psi. Installing on wall or directly to compressor top plate, it can be supplied for 12, 24, and 120 Vac, or fully pneumatic requiring no electrical connection. Basic flow rates up to 40 cfm can be achieved.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Industrial Dryers | Compressed Air Dryers

Drying System supplements gas sample conditioning systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Apr 2008 08:06:59 -0500

Able to lower sample's dew point from +4 to below -15°C, SDS(TM)-Series Supplemental Drying System eliminates formation of acid mists, including downstream SO3 formation in high SO2 services. Offered for single (up to 10 Lpm) or dual (up to 5 Lpm each) samples streams, unit also features corrosion resistant NEMA 12 enclosure. Dryer can be added on to compensate for undersized chillers, helping boost chiller performance in sample conditioning systems used in refineries and chemical plants.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Moisture Control Dryers

Hopper and Feeder handle dry materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 17 Apr 2008 08:06:57 -0500

Available in sizes from 5-2,000 lb, TUFF-WRAP Hopper features gasketless access door and utilizes air distribution cone to dry all resin down to slide gate. Non-conductive TUFF-WRAP outer covering resists dents and scratches and helps optimize drying system efficiency. Fabricated from stainless steel, MINI-FEED system moves dried material from drying hopper to feed throat of molding machine or extruder. Amount can be as small as 7 g, depending on shot size of mold.

This story is related to the following:
Chemical Processing and Waste Management
Material Handling and Storage

Search for suppliers of: Drying Systems | Small Parts Feeders | Feed Hoppers

Dryer-Dehumidifier-Cooler processes bulk solid materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 22 Feb 2008 07:45:40 -0500

Intended for 3-A and USDA applications as well as applications involving contamination-sensitive materials, Rotary Batch Dryer-Dehumidifier-Cooler features all-stainless contact surfaces, continuous polished welds, and external removable seals. Configurations are available for both direct and indirect drying, dehumidifying, and cooling. Offering usable batch capacity of 20 cu-ft and total capacity of 48 cu-ft, unit can also blend ingredients in parts as small as 1 ppm with 100% uniformity.

This story is related to the following:
Chemical Processing and Waste Management
HVAC
Material Handling and Storage

Search for suppliers of: Batch Dryers | Rotary Dryers | Condensation Prevention Dehumidifiers | Rotary Coolers | Solids Handling & Process Systems

Batch Mixer dries/dehumidifies/cools bulk solid materials.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Feb 2008 07:25:12 -0500

With all-stainless contact surfaces and suitable for 3-A and USDA applications, Rotary Batch Dryer-Dehumidifier-Cooler uses diagonal, vertical tumbling and spilling motion to optimize particle exposure. This, along with lifters inside drum, minimizes material degradation and promotes process efficiency. Lifters also serve to direct material into discharge spout for 100% evacuation. Ingredients can be blended in parts as small as 1 ppm with 100% uniformity in less than 3 min.

This story is related to the following:
Materials and Material Processing
Chemical Processing and Waste Management

Search for suppliers of: Batch Mixers | Batch Dryers

Vibratory Screener-Fluid Bed Dryer has circular design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Jan 2008 07:52:26 -0500

Self-contained system scalps and de-dusts 2,500-3,000 lb of bulk material per hour using double-deck, 30 in. dia circular vibratory screener and then dries material in 40 in. dia circular vibratory fluid bed processor. Requiring one air inlet and outlet, system is designed to remove oversize and undersize material while drying only on-size material. Elements of construction include imbalanced-weight gyratory motor, spring-suspended screening chamber, and quick-disconnect housing.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Fluid Bed Dryers | Screeners

Infrared Conveyor Dryer suits in-line pad printing.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Nov 2007 07:43:25 -0500

Measuring 60 in. long, Model PP1860-W-1 conveys pad printed parts through drying chamber for post-treatment. Conveyor belt is 18 in. wide with 6 in. clearance inside chamber, which is 30 in. long. Temperature at face of heating element reaches 700°F, and at belt level, temperature is approximately 300°F. Unit comes equipped with adjustable heat shields at both ends of chamber, and conveyor belt speed dial to control amount of time printed item spends in chamber.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Infrared Dryers | Conveyor Dryers

Vacuum Dehydrator removes contaminants from hydraulic fluids.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 30 Jul 2007 07:54:53 -0500

Designed for high volume applications in industries including power generation, pulp and paper, steel, and plastics, Model SVD simultaneously removes water, gases, and solid contaminants from hydraulic fluids. Vacuum dehydrator features standard saturation and temperature sensors and comes with automated touch screen which can also be operated manually. Its frame is 48 in. at bottom, allowing unit to fit into bed of pickup truck.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Filtration Equipment | Vacuum Dehydrators

Rotating Wheel Dryer dries resin and regenerates desiccant.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 09 Jul 2007 07:45:07 -0500

Offered to resin processors as alternative to twin-tower dryers, NovaWheel(TM) Dryer continuously puts dry desiccant into service while regenerating saturated desiccant in same rotational cycle. Models, available for 45-2,270 kg/hr, use steel link drive chain to drive cylindrical wheel, which contains desiccant-impregnated honeycomb divided into 3 sections. Consistent dew point performance is ensured by eliminating spikes and deviations that would otherwise occur due to changeover.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Rotary Dryers | Resin Dryers | Desiccant Dryers

Packaged Drying System replaces compressed air blow-offs.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 08 Jun 2007 07:44:47 -0500

Designed to remove debris and moisture, PowerDry(TM) System incorporates centrifugal blower that develops air flow and pressure from 3 hp motor. FDA compliant hose carries airflow to 6-nozzle air tube that delivers successive hits of high impact air. As alternative to compressed air, PowerDry eliminates potential contamination from oils and scale in compressed air supply. It features washdown design suited for food, beverage, and packaging operations.

This story is related to the following:
Cleaning Products and Equipment
Chemical Processing and Waste Management
HVAC

Search for suppliers of: Dryer Blow-Off Kits | Drying Systems | Centrifugal Blowers

Ultrasonic Spray Dryers target laboratory applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 May 2007 07:41:43 -0500

Equipped with non-clogging, ultrasonic atomizing nozzle, SonoDry Models 750, 1000, 1500 operate at up to 750, 1,000, and 1,500 ml/hr, respectively. Designed to handle both aqueous and solvent-based liquids, machines use twin cyclone capture system with possible yields exceeding 95%. All include software that allows for recipe storage and data logging of all functions. Fully integrated magnetic stirrer and hot plate are standard on SonoDry 1000 and SonoDry 1500.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Spray Dryers

Membrane Air Dryers offer quiet operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 01 May 2007 07:45:03 -0500

RequBalston® IT Series Membrane Air Dryers provide pure, dry compressed air at dewpoint of 35°F and flow rates from 1 to 50 scfm. They remove all compressed air contaminants down to 0.01 micron in size. Without any moving parts, units come with prefilters, auto drains, and membrane modules, and require no electricity.

This story is related to the following:
Cleaning Products and Equipment
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Drying Systems | Membrane Dryers

Aggregate Dryer/Cooler minimizes energy usage.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 26 Apr 2007 08:12:27 -0500

Utilizing 2 exhaust air streams, Ventura 130(TM) Fluid Bed Dryer/Cooler captures and re-uses latent heat. One off cooling section is at 110°F, while one off heat exchangers/heat recovery units is 95°F. With this concept, lowest possible amount of energy is used for drying. In most applications of 4% moisture and above, dryer will use approximately 1,200 BTU/lb of water evaporated or less.

This story is related to the following:
Chemical Processing and Waste Management
HVAC

Search for suppliers of: Fluid Bed Dryers | Fluid Bed Coolers

Cycling Air Dryers are energy efficient.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 Mar 2007 07:45:49 -0500

Available for flows from 20-885 scfm in pressures up to 230 psig, Secotec(TM) Refrigerated Dryers deliver optimal efficiency by using thermal mass medium for storage and operating refrigerant compressor only when necessary. Air-to-air heat exchanger minimizes load on refrigeration system by pre-cooling inlet air. Stainless steel separator and electric demand drain provide reliability, and dryer construction facilitates access to all components.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SWAGELOK CORPORATION - Pressure Regulators for Industrial Applications

Search for suppliers of: Air & Gas Dryers | Refrigerated Air Dryers

Dryer provides gentle handling for minimum dust fines.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 02 Feb 2007 07:05:31 -0500

Designed for continuous operation, rotary tray TURBO-DRYER® dries capsules, pellets, beads, and tablets to final moisture or volatiles level as low as 0.001%, and insures that individual particles are treated for same length of time under controlled conditions. Unit provides containment of product, gases, and odors, and includes solvent recovery ability.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Tray Dryers | Rotary Dryers

Freeze Dryer facilitates transplantable cell stabilization.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Oct 2006 07:58:17 -0500

Max Series helps stabilize transplantable cells and tissues with features such as full PC/PLC control, optional 21 CFR Part 11 software, and instrumentation options that include capacitance manometer and moisture sensor. Along with shelf area up to 20 ft² and condensing capacity to 30 l, product can be supplied with full validation documentation and work books for IQ/OQ.

This story is related to the following:
Chemical Processing and Waste Management

Search for suppliers of: Freeze Dryers