ThomasNet Industrial Newsroom -

Air Density Trim System manages fuel/air ratio in burners.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 30 May 2008 07:54:31 -0500

Designed to sense combustion air temperature, Temp-A-Trim(TM) automatically varies burner fan speed to create constant mass airflow, maintaining optimal combustion efficiency in burner, regardless of combustion air temperature. System requires no special setup or programming. Compatible with linkage and linkage-less controls, Temp-A-Trim minimizes noise levels in boiler rooms as well as need for seasonal tuning of burners.

This story is related to the following:
Test and Measuring Instruments
HVAC
Controls and Controllers

Search for suppliers of: Temperature Sensors | Combustion Controls

Exhaust Management Systems feature idle mode.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Dec 2007 07:31:03 -0500

ATLAS(TM) and TPU families of combustion exhaust management systems are available with idle mode that allows abatement systems to go into standby mode with reduced fuel and water consumption when exhaust is not flowing from attached process equipment. Available with 1-6 inlets, ATLAS systems provide exhaust management for CVD and etch processes (PECVD, HDPCVD, and WCVD), and are suited for treating exhaust streams containing fluorine (PFCs), SiH4, TEOS, WF6, and NH3.

This story is related to the following:
HVAC
Controls and Controllers

Search for suppliers of: Exhaust Systems | Combustion Control Systems

Gas Abatement Systems target semiconductor manufacturers.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 05 Apr 2007 07:46:31 -0500

Equipped with 1-6 inlets, ATLAS(TM) Abatement Systems combine combustion abatement and wet scrubbing stages for optimal powder handling and immunity to corrosion. They offer temperature management system, flow capacity up to 600 slm, and color touch-screen display that facilitates operation and maintenance. ATLAS TCS addresses common CVD gases, while ATLAS TPU addresses PFC gases in CVD and etch processes, and ATLAS Kronis addresses low-k CVD gases in next-generation processes.

This story is related to the following:
HVAC
Controls and Controllers
Chemical Processing and Waste Management

Search for suppliers of: Fume Abatement Systems | Combustion Control Systems | Wet Scrubbers | Gas Scrubbers

Ignition Control handles 2 burners as integrated system.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Nov 2005 07:05:00 -0500

Developed for gas-fired applications utilizing 2 separate burners, Series 35-62 controls single gas valve and simultaneously lights and monitors both gas burners. Features include 24 Vac, microprocessor-based DSI control; system diagnostic LED; selectable number of tries for ignition; and pre-purge and inter-purge timings of 0, 15, or 30 sec. Direct spark gas ignition system also provides remote flame sensing with dual flame sensor inputs.

This story is related to the following:
Controls and Controllers
Transportation Industry Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Gas Burner Controls | Ignition & Starter Switches

Gas Ignition Controls run on 24 or 120 Vac.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Jul 2005 08:07:56 -0500

Intermittent Pilot models 35-73 and 36-63 are microprocessor-based and polarity insensitive. With repeatable timing sequences, they provide TFI times up to 120 sec, local and remote flame sense options, as well as thermostat/power off and automatic reset options. Fenwal 35-73, available in PCB only, case and cover, and potted configurations, is suited for controlling pilot and main gas valves, monitoring flame, and igniting LP and natural gas burners.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Gas Burner Controls

Carbon Control System suits non-conventional furnaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 18 Mar 2004 07:40:20 -0500

Sentinel-FCP pairs extractive lambda probe with Dual Pro dual-loop process controller. Lambda probe, capable of oxygen sensing from ppm up to 15% oxygen, draws sample from furnace and provides oxygen measure to controller, which calculates furnace atmosphere carbon levels and dewpoint. Unit then automatically adjusts trim gas and furnace temperature. Sentinel-FCP can be located remotely and is not susceptible to vibration and thermal shock.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers Sponsored by: Keyence Corporation of America - The Internet Resource for Sensor Solutions

Search for suppliers of: Oxygen Sensors | Combustion Controls

Water Heater inhibits ignition of flammable vapors.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 May 2003 07:42:17 -0500

Residential water heater, with Shield Combustion System(TM), employs Lock-Shield flame arrestor plate with 18,000 air louvers that prevent ignited flammable vapors from traveling backwards out of combustion chamber/water heater. Thermal switch detects increases in heat and shuts down gas supply to pilot and main burner. Piezo igniter provides pushbutton ignition of pilot flame, while sight glass allows unrestricted view into combustion chamber for observation of burner and pilot flames.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Gas Fired Water Heaters | Combustion Control Systems

Control Panels manage combustion processes.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Apr 2003 07:40:24 -0500

CP series control panels provide solution for managing combustion processes and optimizing system performance. CPL models are basic, single burner control panels, while CPM models provide larger enclosures and dual burner control. CPH models are designed for higher voltages and 3-phase currents required by large burner blowers. All CP control panels include ignition transformer and provide purge sequence, automatic start, damper modulation, and one alarm.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Combustion Control Panels

Burner Controller can be configured by keypad or PC.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 06 Jun 2002 08:03:52 -0500

PMA Model KS 40-1 controls multiple industrial burners with modulating or sequential control functions. Control can be switched from on/off of sequential burners to motorized control of modulating burners, allowing use of different fuels. It can operate burners in parallel, as positioner that follows output signal from another controller, or it can accept second temperature or pressure input as process variable for boiler drum level control applications.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Burner Controls

Transmitter offers combustion trim control.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 02 Jan 2002 13:37:36 -0500

Oxymit(TM) DIN-rail transmitter module provides raw signal processing, oxygen and temperature re-transmit (4-20mA), intelligent probe diagnostics and performance verification, as well as RS485 communications with Modbus protocol. Unit is designed for fossil fuel-fired environments including steel reheating, glassmaking, power generation, petroleum and petrochem refining, kilns and incinerator installations.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
HVAC
Optics and Photonics Sponsored by: Keyence Corporation of America - The Source for Digital Microscopy Solutions

Search for suppliers of: Transmitters