ThomasNet Industrial Newsroom -

Ignition Circuit is designed for industrial oil/gas burners.

info@productnews.com (ThomasNet News) — Tue, 29 Sep 2009 08:30:40 -0500

CoronaArc circuit incorporates additional high-voltage transformer and supporting diode to create continuous high-voltage DC spark at firing end. Spark current at surface of igniter electrode enables spark gap to be referenced to ground potential and concurrently serve as directed pathway through which stored energy of capacitor discharges high-current arc.

This story is related to the following:
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled
Thermal and Heating Equipment
Waste Handling Equipment
Controls and Controllers

Search for suppliers of: Spark Plugs | High Energy Igniters | Gas & Oil Igniters | Flare Igniters | Electric Igniters | Igniters | Pilot Flares & Igniters | Burner Management Controls | Combustion Equipment | Conversion Burners | Boiler Accessories

Automated Blowdown System increases boiler efficiency.

info@productnews.com (ThomasNet News) — Tue, 14 Apr 2009 08:30:54 -0500

Featuring intelligent controller design, Model 61 BBS modulates blowdown control valve to allow maximum level of dissolved solids, regardless of load conditions, in order to maximize boiler maintenance efficiency. Plug-and-play system has modular design that includes 316 SS sediment trap and sample cooler, temperature gauge, sample control valve, and safety relief valve. Its 4-20 mA output may be configured as PID control output.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Boiler Blowdown Systems

Air Density Trim System manages fuel/air ratio in burners.

info@productnews.com (ThomasNet News) — Fri, 30 May 2008 07:54:31 -0500

Designed to sense combustion air temperature, Temp-A-Trim(TM) automatically varies burner fan speed to create constant mass airflow, maintaining optimal combustion efficiency in burner, regardless of combustion air temperature. System requires no special setup or programming. Compatible with linkage and linkage-less controls, Temp-A-Trim minimizes noise levels in boiler rooms as well as need for seasonal tuning of burners.

This story is related to the following:
Controls and Controllers
HVAC
Test and Measuring Instruments

Search for suppliers of: Temperature Sensors | Combustion Controls

Exhaust Management Systems feature idle mode.

info@productnews.com (ThomasNet News) — Wed, 26 Dec 2007 07:31:03 -0500

ATLAS(TM) and TPU families of combustion exhaust management systems are available with idle mode that allows abatement systems to go into standby mode with reduced fuel and water consumption when exhaust is not flowing from attached process equipment. Available with 1-6 inlets, ATLAS systems provide exhaust management for CVD and etch processes (PECVD, HDPCVD, and WCVD), and are suited for treating exhaust streams containing fluorine (PFCs), SiH4, TEOS, WF6, and NH3.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Combustion Control Systems | Exhaust Systems

Boiler Instrumentation optimizes drum level monitoring.

info@productnews.com (ThomasNet News) — Tue, 11 Dec 2007 07:45:24 -0500

Designed for ASME code compliance, LevelMax enables local and remote monitoring of boiler drum levels. This combination Drum Level Instrument Assembly utilizes Electro Eye-Hye System (Remote Drum Level Indicator) with water gauge glass attached for local, direct viewing of drum level. Electro Eye-Hye System is available with design pressures of 450, 1,000, 1,800, and 3,000 psig.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers
Test and Measuring Instruments

Search for suppliers of: Water Level Gages | Tank Level Gages | Boiler Monitors | Boiler Monitoring Systems

Water Deaerators optimize boiler feed water.

info@productnews.com (ThomasNet News) — Mon, 04 Jun 2007 07:43:59 -0500

Providing capacities from 3,500-51,750 lb/hr, Tray and Spray Feed Water Deaerators reduce residual oxygen level in make-up water to below 7 ppm or .005 cc per liter. Carbon dioxide is virtually zero, optimizing boiler feed water and minimizing chemical usage. Deaerators incorporate electronic features and have few moving parts.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Deaerators

Gas Abatement Systems target semiconductor manufacturers.

info@productnews.com (ThomasNet News) — Thu, 05 Apr 2007 07:46:31 -0500

Equipped with 1-6 inlets, ATLAS(TM) Abatement Systems combine combustion abatement and wet scrubbing stages for optimal powder handling and immunity to corrosion. They offer temperature management system, flow capacity up to 600 slm, and color touch-screen display that facilitates operation and maintenance. ATLAS TCS addresses common CVD gases, while ATLAS TPU addresses PFC gases in CVD and etch processes, and ATLAS Kronis addresses low-k CVD gases in next-generation processes.

This story is related to the following:
Chemical Processing and Waste Management
Controls and Controllers
HVAC

Search for suppliers of: Gas Scrubbers | Wet Scrubbers | Combustion Control Systems | Fume Abatement Systems

Boiler Blowdown Systems capture waste energy.

info@productnews.com (ThomasNet News) — Wed, 28 Dec 2005 07:06:21 -0500

Pre-engineered Series BDHR recovers up to 95% of heat energy normally lost with conventional blowdown separators. Resulting condensate can be used to preheat boiler makeup water, while resulting flash steam can be used to heat deaerator tank. As systems recycle waste energy, they cool boiler blowdown to 140°F or less, acceptable for discharge to municipal wastewater systems. Centrifugal blowdown vessels come in 8 sizes from 8-26 in. with capacities from 100-100,000 lb/hr.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Boiler Blowdown Systems

Ignition Control handles 2 burners as integrated system.

info@productnews.com (ThomasNet News) — Mon, 14 Nov 2005 07:05:00 -0500

Developed for gas-fired applications utilizing 2 separate burners, Series 35-62 controls single gas valve and simultaneously lights and monitors both gas burners. Features include 24 Vac, microprocessor-based DSI control; system diagnostic LED; selectable number of tries for ignition; and pre-purge and inter-purge timings of 0, 15, or 30 sec. Direct spark gas ignition system also provides remote flame sensing with dual flame sensor inputs.

This story is related to the following:
Controls and Controllers
Transportation Industry Products Sponsored by: Terra Environmental Technologies, A Terra Industries Co. - Untitled

Search for suppliers of: Gas Burner Controls | Ignition & Starter Switches

Wire Harness works with residential low water cut-offs.

info@productnews.com (ThomasNet News) — Wed, 20 Jul 2005 07:33:15 -0500

Universal Wire Harness is designed for use with RB-24 low water cut-off for 24 V residential hot water boiler applications. Field-assembled harness allows installing contractor to plug directly into OEM's wiring harness without cutting wires. Model UWH-RB-24-A is designed for atmospheric boilers with 6-pin aquastats or vent damper, while UWH-RB-24-S is designed for sealed combustion boilers that use integrated burner controls or electronic aquastats.

This story is related to the following:
Controls and Controllers
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Low Water Cutoffs

Gas Ignition Controls run on 24 or 120 Vac.

info@productnews.com (ThomasNet News) — Fri, 15 Jul 2005 08:07:56 -0500

Intermittent Pilot models 35-73 and 36-63 are microprocessor-based and polarity insensitive. With repeatable timing sequences, they provide TFI times up to 120 sec, local and remote flame sense options, as well as thermostat/power off and automatic reset options. Fenwal 35-73, available in PCB only, case and cover, and potted configurations, is suited for controlling pilot and main gas valves, monitoring flame, and igniting LP and natural gas burners.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Gas Burner Controls

Programmable Controller remotely monitors boilers.

info@productnews.com (ThomasNet News) — Fri, 15 Oct 2004 08:12:47 -0500

Model S1000B features 16 inputs permitting addition of temperature sensors and prove switches. Data logging feature records information such as water temperature, number of cycles, sequences, and run times of boiler modules and circulator pumps. Users can view and monitor system, download data logs, and change system settings from remote locations through password-protected access on web. Featuring VFD display, unit comes in corrosion-resistant, stainless steel enclosure.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Boiler Control Systems | Programmable Controllers

Air Blower keeps machine window clear of debris.

info@productnews.com (ThomasNet News) — Fri, 06 Aug 2004 08:19:45 -0500

With no moving parts, Air Disk Window Blowoff keeps window of machines clear of coolant, chips, and debris, ensuring process and part visibility at all times. Compact disk delivers 360° airstream that blows out across entire window surface. Using proprietary airflow technology, disk ejects compressed air through thin-slotted ring nozzle. Peel and stick adhesive permanently bonds aluminum Air Disk to glass or polycarbonate surface.

This story is related to the following:
Cleaning Products and Equipment
Controls and Controllers
HVAC

Search for suppliers of: Blower Blow-Off Kits | Air Wipes

Carbon Control System suits non-conventional furnaces.

info@productnews.com (ThomasNet News) — Thu, 18 Mar 2004 07:40:20 -0500

Sentinel-FCP pairs extractive lambda probe with Dual Pro dual-loop process controller. Lambda probe, capable of oxygen sensing from ppm up to 15% oxygen, draws sample from furnace and provides oxygen measure to controller, which calculates furnace atmosphere carbon levels and dewpoint. Unit then automatically adjusts trim gas and furnace temperature. Sentinel-FCP can be located remotely and is not susceptible to vibration and thermal shock.

This story is related to the following:
Controls and Controllers
Sensors, Monitors and Transducers

Search for suppliers of: Oxygen Sensors | Combustion Controls

Acid Dewpoint Monitor maximizes boiler efficiency.

info@productnews.com (ThomasNet News) — Wed, 03 Mar 2004 07:43:18 -0500

Conserver IV - Model 440 determines acid dewpoint temperature in order to meet Clear Skies Initiative and reduce maintenance problems associated with SO3 in boiler operation. Unit offers 6 programs, each with custom display: SO3; SO3 calculation to indicate relationship to condensables; Minimum metal temperature calculation; SO3 calculation to indicate relationship to corrosion potential; efficiency calculation; and Rate of Acid Build Up graph.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Boiler Monitoring Systems | Dew Point Monitors

Condensate Recovery System handles temperatures to 392°F.

info@productnews.com (ThomasNet News) — Tue, 02 Mar 2004 07:39:22 -0500

Available in cast iron or cast steel, GP14 PowerTrap(TM) pumps high-temperature condensate for vented receivers, sumps, and other pump applications. Non-electric design ensures no cavitation or seal leakage, and externally removable motive medium intake valve is protected by internal screen. Able to handle temperatures to 392°F and pressures to 200 psig, product has Inconel compression spring and connection sizes of 3 x 2 NPT, 2 X 2, and 3 x 2 flanged.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled

Search for suppliers of: Condensate or Condensate Return Pumps | Condensate Return Systems

Water Heater inhibits ignition of flammable vapors.

info@productnews.com (ThomasNet News) — Tue, 13 May 2003 07:42:17 -0500

Residential water heater, with Shield Combustion Systemâ"¢, employs Lock-Shield flame arrestor plate with 18,000 air louvers that prevent ignited flammable vapors from traveling backwards out of combustion chamber/water heater. Thermal switch detects increases in heat and shuts down gas supply to pilot and main burner. Piezo igniter provides pushbutton ignition of pilot flame, while sight glass allows unrestricted view into combustion chamber for observation of burner and pilot flames.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Gas Fired Water Heaters | Combustion Control Systems

Control Panels manage combustion processes.

info@productnews.com (ThomasNet News) — Thu, 03 Apr 2003 07:40:24 -0500

CP series control panels provide solution for managing combustion processes and optimizing system performance. CPL models are basic, single burner control panels, while CPM models provide larger enclosures and dual burner control. CPH models are designed for higher voltages and 3-phase currents required by large burner blowers. All CP control panels include ignition transformer and provide purge sequence, automatic start, damper modulation, and one alarm.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Combustion Control Panels

Liquid Level Control suits low level cutoff protection.

info@productnews.com (ThomasNet News) — Wed, 22 Jan 2003 07:34:37 -0500

Single probe LLC8 series uses AC current sensing to prevent thermal runaway and excessively high internal pressure in hot water tanks by detecting presence of conductive liquids. With open board design and UL353 recognition, it offers factory fixed time delay of 1â�"60 sec and is available for input voltages of 24, 120, or 230 Vac, 50/60 Hz. Sense resistance is factory fixed from 5Kâ�"250K ohms. SPDT relay contacts are rated 10 A resistive at 120/240 Vac.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Liquid Level Controls | Low Water Cutoffs

Controllers provide multi-function capabilities.

info@productnews.com (ThomasNet News) — Mon, 11 Nov 2002 07:47:09 -0500

Conductance actuated level devices control burner circuits, pumps, motor starters, and electric valves. Dual-function 750B-LP-120 models have low-water cutoff and pump control capabilities, while 750B-DLP-120 models have tri-function capabilities, with 2 low-water cutoffs and pump control. Both controllers are available in panel mount configurations and are CSD-1 compliant. Series 750B controllers provide low-water cutoff protection and level control.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Water Level Controls | Pump Controls | Low Water Cutoffs