ThomasNet Industrial Newsroom - Controls & Controllers

SMT DC Switching Regulator suits space premium applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Jul 2009 08:34:10 -0400

Measuring 15.24 x 8.50 x 7.00 mm, compact V78XX-500-SMT series offers efficiencies of up to 96% and does not require heat sink. It offers wide input range from 4.5-28 Vdc and regulated output voltages of 3.3, 5, 12, and 15 Vdc. Output current is 500 mA with operating temperature range of -40 to +71°C at 100% load, derating to 60% load at 85°C. Other features include short circuit protection, thermal shutdown, low ripple and noise (10 mV p-p typical), and MTBF of 2 million hr.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Controls and Controllers

Search for suppliers of: Switching Regulators | Voltage Regulators

Programmable Automation Controller is based on Linux OS.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Jul 2009 08:34:09 -0400

Available for PPC Cubes, GigE Cubes, and RACKtangle Chassis, UEIPAC v2.0 I/O controller supports Xenomai Real-Time OS and Eclipse IDE. It offers independent 1G Ethernet and USB 2.0 ports for communication and diagnostics. Suited for high speed PID loops (8 channels > 20 kHz), device can be programmed in C in either Linux or Windows environments. Linux applications written using UEIPAC v2.0 can run fully standalone on any of UEI platforms without dedicated host PC.

This story is related to the following:
Controls and Controllers
Test and Measuring Instruments

Search for suppliers of: Automation Controllers | I/O Controllers | Programmable Controllers

Stepper Motor Controller has resolution of 1,600 step/rev.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Jul 2009 08:34:08 -0400

Supplied as 57 x 57 mm PCB, SMC75 offers everything required to solve modern control task as standalone controller or controlled from PLC/PC via serial commands or I/O. It incorporates RS485 and CANbus serial interface as well as 8 I/Os that can be configured as inputs, outputs, or analog input - controllable via nanoPLC and MacTalk graphic programming. MODBUS RTU and CANopen facilitate and accelerate connection to PLC, while ActiveX/OCX driver is available for PC or IPC.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Motor Controllers | Stepping Controls

Feeder Controller is compatible with existing models.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Jul 2009 08:34:08 -0400

Plug-compatible with existing 196NT controls, DT-9 Feeder Controller includes color graphics touchscreen interface; multiple communications interfaces, including Profibus, Modus, and Ethernet; redundant microprocessors; and PC configuration software. Versions include DT-9 for new feeders, DT-9 Upgrade to upgrade existing feeder controls to new display, and DT-9 Legacy which allows customers to keep existing 196NT display.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Feeder Controls | Electronic Controls

PD Controllers with Switchers address PoE+ standards.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Jul 2009 08:34:05 -0400

Offered as interface controllers with integrated switching regulators, LTC4269-1/-2 and LTC4278 comply with IEEE 802.3at - Power over Ethernet (PoE+) - standard and are intended for Powered Device (PD) applications up to 25.5 W and beyond. They support 2-event classification, are backward-compatible with IEEE 802.3af devices, and integrate PD controller and synchronous flyback controller (LTC4269-1 and LTC4278) or synchronous forward controller (LTC4269-2).

This story is related to the following:
Controls and Controllers
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Power Controllers | Integrated Circuits (IC)

Rate Controller has stainless steel NEMA 4x enclosure.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 02 Jul 2009 08:39:03 -0400

Offered with AC or DC power, HI 4060 rate controller includes standard EtherNet 10/100 Base T port, with embedded web server and RS 232 printer or scoreboard display port. It features INTEGRATED TECHNICIAN® (IT) for system diagnostics and troubleshooting and has secure memory module with SD card (SMM®-SD), which allows manual transfer of configuration data to another instrument or PC using SD technology. Product can be slaved to other devices for ration metric control.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Industrial Controllers | Volumetric Controllers | Weighing Controls

Temperature Profiler verifies oven processes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Jul 2009 08:34:14 -0400

Oven Tracker XL2 consists of data logger, thermal barrier, thermocouples, and analytical software. It comes standard in 6 or 8 channels, but up to 16 channels can be supported via use of Dual Interface Block. Also included, Smartpaq LED indicator immediately shows, upon oven exit, if process is in control and run is successful. Along with hardwired telemetry and configurable transducer interface, system features memory capable of handling 10 consecutive runs before requiring download.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Temperature Profilers

Panel-Mount Thermal Loop Controller comes in 1/8 DIN size.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 01 Jul 2009 08:34:14 -0400

Offered in horizontal/vertical configurations, EZ-ZONE® PM 1/8 DIN allows for integration of power controller with PID controller and over/under limit controller in one package. Character and button size promote usability, and case slots aid in removal of control hardware from front-pluggable DIN chassis. Features include dual-channel PID control, cascade control, square-root linearization, and wet/dry bulb capability as well as ratio and pressure to altitude compensation curves.

This story is related to the following:
Controls and Controllers
HVAC

Search for suppliers of: Temperature Controls | Temperature Controllers | Thermoelectric Controls | Thermoelectric Controllers

Booster helps fine-tune control valves.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:35:01 -0400

Featuring precisely manufactured bypass restriction, booster can be adjusted exactly and lead-sealed in that set-up, eliminating trial and error procedures of fine tuning control valves. It is completely pressure balanced and provides stable output, even under fluctuating pressure conditions. When used in combination with positioner, booster allows control valves with large pneumatic actuators to be controlled precisely in applications with high flow rates or significant pressure drops.

This story is related to the following:
Controls and Controllers
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies

Search for suppliers of: Valve Controls | Boosters

Safety Camera System is built for flexible integration.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:34:59 -0400

Suited for point-of-operation safeguarding applications, V200/V300 WS Safety Camera Systems are single-unit devices that require no alignment or software configuration. They can be mounted in corner of rectangular frame opening to safeguard areas where operators must reach into machine and use invisible LED light beam to illuminate reflective strips that define protective coverage area. Any interruption to that area is detected by camera, and dangerous movement is stopped.

This story is related to the following:
Sensors, Monitors and Transducers
Controls and Controllers
Test and Measuring Instruments
Vision Systems

Search for suppliers of: Press & Machinery Safety Devices | Production Controls | Visual Inspection Cameras

Zigbee Control System suits MDU applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:34:58 -0400

Intended for commercial and residential multi-dwelling units, MX-880z ZigBee RF and IR Remote Control combined with MRZ-260 ZigBee RF-to-IR Base Station will eliminate RF collisions caused by simultaneous button presses. ZigBee allows installation of as many remotes as required, each with its own ZigBee network ID. PC-programmable MX-880z can control up to 48 devices, with up to 8 pages for each device, while MRZ-260z provides 4 independently routed IR outputs and built-in IR blaster.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Remote Controls | Infrared Controls

Control System offers ruggedized modular, scalable design.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Jun 2009 08:34:56 -0400

TITAN® Plus provides control, diagnostic, and trending capabilities, enabling operators to run complex sheet extrusion systems. It is designed in ergonomic console with triple touchscreen capable panel that swivels 180° and features color printer access,storage cubbies, and USB and AC ports and plugs. System can email, page, or text administrators if machine goes down or needs maintenance. Voice annunciation feature announces cause for alarms in 1 of 4 languages.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Industrial Control Systems | Extrusion Controls

Process Control System is designed for small extruders.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 29 Jun 2009 08:33:52 -0400

Based on MACO® Compact System platform, EM-3c control system can be used for extruder temperature and pressure control or complete line control. It utilizes CE.net operating system and offers preconfigured screens and sequence login to simplify installation. System's temperature card is designed for single-screw, twin screw, co-extrusion, or blown film applications and features fully automatic adaptive tuning as well as conventional tuning.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Process Control Systems | Extrusion Controls

Flat Motor offers high nominal torque of up to 0.83 mNm.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:13 -0400

Measuring Ø10 x 12.5 mm, EC 9.2 Flat motor has 10 mm OD that includes protective cover to protect against contact and as mounting aid during installation of motor. It provides stall torque of up to 1.29 mNm and is equipped with 8-pole Neodymium permanent magnet and preloaded ball bearings. Available with or without Hall sensors, drive meets ISO 13485 medical technology quality standard and suits applications where space is at premium.

This story is related to the following:
Controls and Controllers
Mechanical Power Transmission

Search for suppliers of: Motor Drives | Medical Equipment Device & Instrument Motors

Flyback Controller operates at junction temperature of 150°C.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 26 Jun 2009 08:28:08 -0400

Available in 6-pin ThinSOT(TM) package, H-grade version of LTC3803-3 current mode flyback DC/DC controller can be powered by input ranging from 9-75 V. Unit maintains 300 kHz operating frequency and offers adjustable slope compensation for optimized transient response with minimum output capacitance, and soft-start function that minimizes inrush current/output voltage overshoot. Operating in -40 to +150°C temperatures, IC features 40 µA start-up and 240 µA quiescent current.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Controls and Controllers

Search for suppliers of: Voltage Controls | Integrated Circuits (IC) | DC To DC Converters | Current Controls

Door Entry System is offered in kit form.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 25 Jun 2009 08:28:43 -0400

Supplied with everything required for installation, AV2058/51 T-Line Villa Kit consists of entry panels combined with T-Line audio and video house phones. Kits for audio and video entry systems secure residential or commercial buildings from unauthorized access. For video systems, 5-wire technology minimizes installation time and effort by eliminating need for coaxial cable.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Access Control Systems

Cooling Tower Control eliminates excess chemical feeds.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 25 Jun 2009 08:28:39 -0400

Comprised of Model 22 Controller, Model PHS10 pH sensor, and Model CS10 conductivity sensor, Model 2122 Cooling Tower Control System applies various chemicals to prevent corrosion, scaling, and fouling. Rack-mounted, plug-and-play system controls acid feed, blowdown, and inhibitor feed in cooling processes. Timer-based overfeed function locks out blowdown cycle or acid/base feed function, and triggers process alarm if acid feed or blowdown cycle proceeds longer than predetermined cycle time.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Cooling Tower Controls

Compact Embedded Controller suits CANbus applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Jun 2009 08:27:48 -0400

Compact CANminiBOX(TM) weighs less than 1 lb and features AMD Élan 133 MHz SC520 processor with 128 MB internal SD-RAM and 512 MB SD-RAM CompactFlash. It offers front-panel availability for 10/100 MBit/sec Ethernet, status LED's, RS232 serial port, CAN port, and one USB 1.1 port. Using 10-28 Vdc power, unit operates within ambient temperatures of 0 to +50°C and features 2 kV ESD protection on all inputs. DIN-rail mounted unit consumes less than 6 W and measures 3 x 2 x 4.7 in.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Embedded Controllers

Wireless Controller is designed for green applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Jun 2009 08:27:29 -0400

MeshScape® 6424 Wi-Controller supports configurations of analog and digital outputs to control actuators and relays serving points of energy consumption such as boilers and heaters. Device can receive direct/supervisory control variables over MeshScape® wireless sensor network and may be configured for continuous regulatory, on-demand, scheduled, and/or timer-based control. Remote/local overrides and fail-safe modes ensure proper functionality even if wireless communication is disrupted.

This story is related to the following:
Controls and Controllers
Green & Clean Sponsored by: Siemens Corporation - Answers for the Enviornment

Search for suppliers of: Wireless Controls | Supervisory Controls | Power Controls | Wireless Controllers | Power Controllers | Controllers

PTZ Camera Controller seamlessly switches between inputs.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Jun 2009 08:27:28 -0400

Used for classroom automation, live event production, and videoconferencing, automated and robotic ControlVIEW XHD features HD, RGBHV, and SD video switching; video transitions; and camera preset trigger functionality. Up to 72 preset camera positions can accommodate up to 6 PTZ cameras with seamless switching between inputs. This 6 x 1 switcher accepts analog SD, HD, and RGBHV on all inputs and up/downscales signals to dual program outputs at either SD, HD, or RGBHV resolution.

This story is related to the following:
Controls and Controllers

Search for suppliers of: Controllers