ThomasNet Industrial Newsroom -

Wiper/Scraper Mats are wear-, fade-, and crush-resistant.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 18 Aug 2008 07:38:36 -0500

Combining coarse fibers and heavy-duty vinyl, Windsor(TM) wiper/scraper matting systems suit high-traffic areas such as restaurants, office buildings, hotels, museums, malls, and other public facilities. Available in navy blue, charcoal, and brown as well as in custom cuts and lengths, mats have multidirectional pattern that brushes away dirt, grit, and moisture.

This story is related to the following:
Plant Furnishings and Accessories
Services

Search for suppliers of: Custom Mats | Scraper Mats | Vinyl Mats

Construction Mats are made from fiber reinforced polymer.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 18 Jun 2008 08:00:55 -0500

FRP Pads and Mats offer corrosion resistant foundations and support surfaces that minimize amount of soil preparation required prior to starting development work. Providing portable access for heavy traffic or equipment to environmentally sensitive or challenging areas, lightweight, molded, and non-slip pads can be used as temporary roadways, helicopter landing pads, outrigger pads, trench plates, or supports for building relocation.

This story is related to the following:
Materials and Material Processing
Services
Architectural and Civil Engineering Products
Mechanical Components and Assemblies

Search for suppliers of: Foundation Pads | Fiberglass Mats | Custom Mats | Molded Composites

Custom Fittings suit aerospace and other applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Apr 2008 07:52:40 -0500

Service verifies performance of vacuum cups.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Apr 2008 07:52:37 -0500

With Match and Test program, Vi-Cas engineers match customer-supplied custom vacuum cups against extensive selection of standard parts and suggest alternate materials and configurations that can yield shorter lead-times with performance that typically exceeds original parts. If no suitable standard cups are available, Vi-Cas manufactures custom vacuum cups in materials to suit most any application including lifters, manipulators, pick-and-place systems, and packaging.

This story is related to the following:
Services

Search for suppliers of: Design & Build Engineering Services | Manufacturing Services

Custom Manufacturing Service produces passive devices.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 14 Aug 2007 07:43:24 -0500

HighQ(TM) copper on silicon integrated passive device (IPD) manufacturing services are available for those with ready-for-production product and those needing custom product designs. This 8 in. wafer technology, for production of passive devices used in portable and wireless applications, offers thick copper inductors, MIM capacitors (0.62 fF/µm²), and TiN resistors (9 <font face='Symbol'>W</font>/square). Products withstand -65 to +150°C temperature cycling and can operate in 150°C for up to 504 hr.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Services

Search for suppliers of: Manufacturing Services | Passive Power Components

Services help channel partners add value and gain profit.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 20 Jun 2007 07:40:52 -0500

Lexmark Fleet Manager lets channel partners leverage Lexmark enterprise-managed print services capabilities for their customers. With this service, channel partner establishes its own contract directly with customer, delivers value-added service, and provides visibility and control of output environments. ValuePrint program gives partners way to bundle device and supplies costs with partner-led management and break-fix services into single monthly payment for their customers.

This story is related to the following:
Communication Systems and Equipment
Services

Search for suppliers of: Printing Services | Value-Added Contract Manufacturing | Value-Added Communication Networks

Deep Drawn Stampings are manufactured up to 12 inches deep.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 May 2007 08:20:01 -0500

Deep Drawn Stampings can be manufactured from materials such as aluminum, steel, and brass, as well as other metals. Available tooling library will result in minimal initial tooling investment to develop new parts. Machinery also can perform small metal stamping parts such as: spring metal stampings, clip metal stampings, and cup metal stampings, produced with progressive dies, compound dies, or single operation dies. All parts are made to meet individual requirements.

This story is related to the following:
Services

Search for suppliers of: Metal Stampings | Deep Drawn Stampings | Contract Manufacturing

Manufacturing Service offers line-ready custom die castings.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 May 2007 07:35:13 -0500

Providing custom high-pressure/high integrity aluminum and zinc die castings with full machining and component assembly capabilities, Die Casting manufacturing service delivers line-ready assemblies to meet just-in-time requirements. Press capabilities in zinc and aluminum range to 400 and 800 tons clamp force, respectively, while high integrity processes include squeeze casting and semi-liquid casting. Service targets hydraulic, engine, and electrical end product applications.

This story is related to the following:
Services

Search for suppliers of: Manufacturing Services

Neo Magnet Assemblies are offered in various configurations.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 18 Jan 2007 07:05:17 -0500

Assemblies made with Neodymium (Neo) magnets are available in 3 main styles: round base, channel, and sandwich. Each is constructed with magnet encased in plated or powder-coated steel cups, channels, or plates. Coatings are available for outdoor use, and rubber boots provide scratch resistance. Use of Neo magnets increases capacity of 30 lb assembly to 100 lb while staying within given size and shape requirements.

This story is related to the following:
Services

Manufacturer produces die cast parts for off-road vehicles.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 28 Nov 2006 07:43:31 -0500

Providing custom-manufactured die cast parts with high strength and pressure tightness, Die Casting Services include conventional high pressure die casting, squeeze casting, and semi-liquid process casting. Company's Buhler 630 SC High Pressure Die Casting machine is fully automated with Thermtronix melting/holding furnace, Rimrock autoladle and die spray units, Sterlco die thermal control unit, and ABB 5-axis robot for part extraction/trim press loading.

This story is related to the following:
Materials and Material Processing
Services

Search for suppliers of: Die Casting Automation Equipment | Manufacturing Services

Manufacturing Service provides custom preforms.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 15 Sep 2006 07:38:36 -0500

Utilizing Direct Nanoparticle Deposition process, custom manufacturing service provides single-step deposition of highly doped core preforms. DND's nanoparticles mitigate onset of clustering and related effects such as photodarkening in ytterbium fibers. Process is suitable for large mode area fibers requiring flat refractive index profiles and/or radially doped profiles. Each preform is delivered fully characterized with refractive index profile and absorption data.

This story is related to the following:
Welding Equipment and Supplies
Services

Search for suppliers of: Manufacturing Services | Preforms

RFIC Assembly/Test Services suit commerical/defense markets.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 12 May 2006 07:58:33 -0500

Radio Frequency Integrated Circuit (RFIC) services include design, manufacture, and testing of RFIC multi-chip modules for ceramic, BGA, LGA, and chip scale devices. Process capabilities for RFIC assembly and packaging include auto epoxy and eutectic die attach, auto ball and wedge bonding, and low volume SMT (0201 placement). Design, manufacture, and test competencies include test interface development, test automation and data analysis, and process engineering.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Services

Search for suppliers of: Manufacturing Services | RF Integrated Circuits

Service provides customized harnessing assemblies.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 21 Mar 2006 07:08:56 -0500

Harness design team works with customers to produce design that meets application requirements for electrical performance, mechanical attributes, sizes, shape, and durability. Integrated harness systems meet range of environmental sealing specifications, and can be designed for long-term fluid immersion and resistance to various fluids including NBC agents. Materials are available for lightweight and small size needs as well as flammability requirements.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Safety and Security Equipment
Services

Search for suppliers of: Harness Assemblies | Manufacturing Services | Design & Build Engineering Services

Urethane Components have customizable ESD properties.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 13 Feb 2006 07:04:27 -0500

Designed for media-transfer equipment that generates tribocharge through roller or belt friction, Durethane(TM) has conductive properties that are homogeneously modified at molecular level via RoHS-compliant additives at levels from 0.1-1% by weight of total material. Durethane ESD properties are customizable in solid materials from E5 to E10 ohm-cm at hardness of 5 Shore A-70 Shore D and in open- or closed-cell foams from E7 to E10 ohm-cm at hardness of 1A-90A.

This story is related to the following:
Services

Search for suppliers of: Molded & Cast Urethane Products | Manufacturing Services | Plastics Contract Manufacturing

Reverse Engineering Service offers custom/standard gears.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Jun 2005 07:48:31 -0500

Using REVWORKS and GearTrax Add-Ins to Solidworks and Faro Titanium Arm, reverse engineering service produces parts from existing sample parts. Made-to-order custom and standard gears of all types are available. Quantities range from 1 piece replacements or prototypes to 10,000 piece production runs. Examples include spur gears, helical gears, worm gears, gear racks, internal gears, bevel and miter gears, spiral bevels, pinion shafts, timing pulleys, and sprockets.

This story is related to the following:
Services

Search for suppliers of: Manufacturing Services

Aluminum Extrusions include 7000 Series alloys.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 12 Feb 2004 07:50:07 -0500

Aluminum Extrusions are available with walls as thin as 0.030 in. and circle sizes to 35 in. Tongue ratios, or relationship of leg length vs distance between legs, are achievable as deep as 40:1. Finishes range from conventional anodizing and power coating to electrophoresis, which is decorative and increases corrosion resistance. Machine-applied, peel-away tape protects finishes.

This story is related to the following:
Services

Search for suppliers of: Custom Aluminum Extrusions

Holding Assemblies suit mass-market applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 02 Jun 2003 07:42:15 -0500

ValueMagâ"¢ Magnetic Holding Assemblies are offered with Alnico, Ceramic, and Rare Earth magnet materials. They are suitable for use with jigs, fixtures, dies, and metal working tools. Other industrial uses include applications in metal-cutting equipment, machine tools, and tool accessories. Assemblies suit consumer-oriented products such as antenna mounts, tool and part racks, sign and banner mounts, chart holders, and door latches.

This story is related to the following:
Material Handling and Storage
Services

Blocks and Runners are designed for one-way shipping.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Dec 2001 15:09:54 -0500

HexaBlokâ"¢ components facilitate material handling for bins and other large containers. They are applied to bottom of container by standard PSA, hot melt adhesives, or glues. Hexacomb honeycomb structure is made from kraft paper and water-based adhesives. Vertical cell orientation handles heavy loads. Blocks are available in 6 in. lengths, 6 in. widths, and heights of either 3 or 4 in. Runners are 60 in. long with same width and height.

This story is related to the following:
Material Handling and Storage
Services

Search for suppliers of: Material Handling Equipment | Pallet Parts | Honeycomb Structures | Paperboard Pallets