ThomasNet Industrial Newsroom -

Framing Clamp System has 1,000 lb capacity per end clamp.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 16 Jul 2008 07:35:50 -0500

Designed for installing HVAC equipment, exhaust fans, vents, and skylights, framing roof openings, and supporting loads above or below roof decks, Framing Clamp System requires no welding or specialized tools for installation. System consists of End Clamps, T-Brackets, and Perforated Channels which are available in lengths up to 10 ft. In typical framing application, 4 End Clamps are attached to 2 parallel bar joists or beams, and each End Clamp occupies 1¼ x 3 in. space between joists.

This story is related to the following:
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Material Handling and Storage

Search for suppliers of: Structural Framing Systems | Clamping Systems

Steel Framing System allows for spans of up to 65 ft.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 09 May 2008 07:33:40 -0500

Designed for commercial/industrial applications, ConXL(TM) long-span steel framing system is available for parking structures, hospitals, and data centers, as well as pipeline, pipe rack, and refinery structures for oil/gas industry. Robotically welded unit features bi-axial special moment frame (SMF) joint that meets special detailing requirements for high seismic areas, OSHPD (California's Office of Statewide Planning & Development) requirements, and U.S. DoD anti-terrorism standards.

This story is related to the following:
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Building Framing Systems

Structural Framing System suits cleanroom applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 15 Aug 2007 07:49:15 -0500

Cleanroom Profile System provides cleanroom manufacturers with series of modular aluminum framing components specifically designed for contaminant-sensitive environments. Due to its modular nature, product line facilitates configuration and allows for reconfiguration as needed when building machine bases, material shuttles, tables, cabinets, and more. System uses bolt-together construction and includes smooth surfaced aluminum extrusions and aluminum cover strips.

This story is related to the following:
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Laboratory and Research Supplies and Equipment

Search for suppliers of: Structural Framing Systems | Cleanroom Equipment

T-Slot Framing System offers stainless steel leveling feet.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 23 Jul 2007 07:58:14 -0500

T-slotted aluminum framing system, The Industrial Erector Set, accepts leveling feet. Eight bases made from 304 SS are available with or without floor mount holes, in diameters of 30-120 mm, with load capacities up to 8,800 lb and anti-slip rubber pads. Additional options for feet include choice of stainless steel threaded stems in 15+ different lengths, available in metric sizes from M8-M20 and imperial sizes from ¼-20 to ¾-10.

This story is related to the following:
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Material Handling and Storage
Mounting and Attaching Products

Search for suppliers of: Structural Framing Systems | Metal Framing | Iron & Steel Feet

Display Frames feature front-loading design.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 14 Jun 2007 07:34:45 -0500

With ability to attach to walls and windows, EuroSign(TM) DisplayFrames are available in 8½ x 11 and 36 x 48 in. sizes. Standard units are made of plastic/aluminum frame profiles and feature integrated radius corners with backer boards. Contoured frame profiles are factory applied onto Flex-Hinges that allow frame and corner to open and close and hold graphics securely. Frames include clear anti-reflective lenses, mounting holes, double side corner tape, and screws.

This story is related to the following:
Material Handling and Storage
Retail and Sales Equipment
Labels, Tags, Signage and Equipment
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Custom Frames | Display Case Frames | Sign Frames | Wall Frames | Window Frames

Wall-Mounted Frame provides compact storage solution.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 May 2006 08:05:56 -0500

With proper anchors and strong wall, multipurpose frames offer 300 lb capacity for storing objects using wall space (up to 500 lb with set of 3 frames). Products measure 72 in. high and can be cut in two 36 in. frames or four 18 in. frames. Perforated every 1 in. for adjustment of accessories, frames can be combined with accessories such as overhead workstation lights, louvered panels for plastic bins, and overhead tool rails.

This story is related to the following:
Material Handling and Storage
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Storage Systems | Wall Frames

Flexible Metal Track suits curved framing applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Oct 2005 09:31:36 -0500

Flex-Lite provides way for builders to frame curves by utilizing flexible metal track or plate with wood or metal studs. Product is manufactured from 25-gauge G-40 galvanized sheet metal and is available in 3 5/8 in. x 10 ft long pieces. Each piece includes 20 pivotal sections that achieve 15 in. radius. Flex Lite can be formed by hand and secured by self-tapping or sharp point screws. Pre-punched holes in flanges and web plate facilitate installation.

This story is related to the following:
Material Handling and Storage
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Wall Frames | Metal Edging Frames

Wall Plates/Frames accommodate interchangeable jack modules.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 30 Nov 2004 07:50:08 -0500

TradeMaster® Keystone Wall Plates and Decorator Frames accept any combination of UTP and multimedia jack modules. Modules are available with F connectors for video coax cable; Category 5e jacks for data, telephone, camera, and audio; binding posts for speaker wiring; RCA to F connectors for sub-woofer pre-out; and blank modules to fill unused jack module spaces. Wall plates and frames come in 1, 2, 3, 4, and 6 port variants in ivory, light almond, and white.

This story is related to the following:
Mounting and Attaching Products
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Wallplates | Wall Frames

Profiles provide flexible alternative to welded steel.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 23 Sep 2004 07:47:30 -0500

Aluminum structural framing profiles in Series 40/50 include closed-slotted and radius profiles for clean applications, as well as profiles with 50 x 150 mm and 80 x 120 mm cross sections for heavy-duty applications. Profiles employ connectors that provide bolt-together construction to facilitate assembly and reconfiguration. Accessories give users ability to develop complete applications from single source.

This story is related to the following:
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags
Mechanical Components and Assemblies

Search for suppliers of: Extruded Aluminum Profiles

Framing System suits material handling applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 18 Jun 2004 07:55:06 -0500

HT Series modular aluminum framing system is suited for designing carts, gravity feed racks, or integrating with existing T-slotted aluminum lumber. Product line offers 20 styles of bars to meet project requirements. Working with HT Series requires users to cut bars to length and select connection method. Accessories, such as joining plates, doors, and panels, are available.

This story is related to the following:
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Structural Framing Systems

Framing System uses alloy 6005T6 for higher strength.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 21 Mar 2002 08:24:28 -0500

Aluminum-profile Series 60, for machine support, linear motion, frame building, and material handling applications, is based on 60 x 60 mm cross-sections. Profiles up to 120 x 240 mm can be complemented by foam-filled combination profiles for cross-section dimensions of 420 x 240 mm. T-Slots permit use of M12 connecting elements, withstanding 2.5 times load of customary M8 screw joints. Alloy 6005T6 provides 10% higher stiffness than more commonly used alloy 6063T6.

This story is related to the following:
Material Handling and Storage
Architectural and Civil Engineering Products Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Aluminum Frames | Structural Framing Systems