ThomasNet Industrial Newsroom -

Permeable Composite Pavers are made of recycled material.

info@productnews.com (ThomasNet News) — Tue, 28 Apr 2009 08:28:37 -0500

Manufactured from 95% recycled rubber tires and plastics, VAST Permeable Composite Pavers offer eco-friendly stormwater management option. With infiltration rate of more than 400 iph when installed with open-graded base, they can decrease rate and volume of rain runoff from parking lots, driveways, sidewalks and patios. Measuring 3 x 6 in., pavers weigh 11 lb/sq ft and provide structural strength, durability, and appearance to replace segmental concrete.

This story is related to the following:
Architectural and Civil Engineering Products
Materials and Material Processing
Green & Clean

Search for suppliers of: Stormwater Management Products | Recycled Rubber Products | Patio Blocks

Stormwater Chambers are offered with internal manifold.

info@productnews.com (ThomasNet News) — Thu, 17 Jul 2008 07:41:41 -0500

Recharger® 180 and 280 incorporate internal manifold feature, which introduces design flexibility to stormwater management system and decreases required installation footprint. Located on chamber, 2 side portals allow manifolding to take place at any point within system, eliminate need to build external manifolds, and optimize cross-feed capabilities. High Volume Low Velocity (HVLV) FC-24 Feed Connectors, open on both endwalls, are inserted into side portals to construct manifold.

This story is related to the following:
Architectural and Civil Engineering Products

Search for suppliers of: Stormwater Management Products

Septic Leaching Chamber offers 20° articulation connection.

info@productnews.com (ThomasNet News) — Fri, 07 Mar 2008 07:36:17 -0500

Made from high-density polyethylene, BioDiffuser® ARC 18 is 5 ft long with secure joint connection that enables units to be installed in straight or contoured applications. Diamond plate traction pattern on external corrugations provides non-slip surface, while optional side port coupler snaps onto chamber for clean-out access and to provide additional plumbing options. Corrugated design optimizes load bearing in trench, meeting H-10 (16,000 lb/axle) specification.

This story is related to the following:
Waste Handling Equipment
Architectural and Civil Engineering Products

Search for suppliers of: Leaching Chambers | Septic Systems

Stormwater Chamber offers storage capacity of 52.2 ft³/unit.

info@productnews.com (ThomasNet News) — Fri, 08 Feb 2008 07:56:02 -0500

Measuring 30.5 in. high x 52 in. wide, and 8.5 ft long, Recharger® 330XL holds nearly 475 gallons and will provide minimum of 80 cu ft of storage when surrounded in stone. Two side portals allow manifolding to take place at any point within system, eliminating need to build external manifolds. Constructed of high-density polyethylene for chemical resistance, chamber can accept up to 24 in. dia pipe into endwall when greater flow rates are required.

This story is related to the following:
Architectural and Civil Engineering Products

Search for suppliers of: Stormwater Management Products | Stormwater Containment Products

Lathe Chuck Shields provide OSHA and ANSI safety compliance.

info@productnews.com (ThomasNet News) — Wed, 06 Dec 2006 08:07:02 -0500

Able to deflect chips and coolant, 3/16 in. thick polycarbonate heavy-duty lathe chuck shields provide barrier between chuck, workpiece, and operator. Shields hinge up to left and out of way for changing chuck, using chuck key, and changing the workpiece. Operator doesn't need to reach over chuck to change workpiece, and shields will not interfere with lathes that have rear guard/backsplash.

This story is related to the following:
Machinery and Machining Tools
Safety and Security Equipment
Architectural and Civil Engineering Products

Search for suppliers of: Machinery Shields | Safety Shields | Splash Shields

Bulkhead Systems helps users customize their vans.

info@productnews.com (ThomasNet News) — Fri, 03 Nov 2006 07:41:39 -0500

Featuring 16 gauge steel construction and 3/16 in. steel top mounting angles, WEATHER GUARD Van Solutions bulkheads fit Ford and Chevy vans. Bulkheads have 9 x 12 in. Dog Hatch(TM) in bottom for safe transportation of long-length material and include 14 in. wide steel shelving. Product's 57½ in. tapered high end panels allow closer installation to sidewall and provide additional cargo space in middle of both Sprinter and full-size vans.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Architectural and Civil Engineering Products

Search for suppliers of: Wide Span Shelving | Bulkheads

Lathe Chuck Safety Shields deliver operator protection.

info@productnews.com (ThomasNet News) — Tue, 31 Oct 2006 07:42:17 -0500

Designed for protection against exposure to rotating chuck, flying chips, and coolant splash, lathe shields come in sliding, crosslide-travel, small and large steel, as well as transparent versions. All shields have polycarbonate window that promotes visibility into point of operation, and various mounting rods, hinges, and brackets are available for mounting to lathe headstock. Frames can be fabricated of steel or impact-resistant, transparent polycarbonate and extruded aluminum.

This story is related to the following:
Machinery and Machining Tools
Safety and Security Equipment
Architectural and Civil Engineering Products

Search for suppliers of: Splash Shields | Safety Shields | Machinery Shields

Permeable Drain Insert aids in compliance of 40 CFR 122.26.

info@productnews.com (ThomasNet News) — Tue, 24 Oct 2006 07:50:56 -0500

Designed to fit rectangular storm drains up to 30 x 40 in. and round drains up to 30 in. diameter, hydrophilic PIG® Drain Insert Plus helps keep hydrocarbons and sediment from entering drains and water system. Filter strips remove floating oil and other hydrocarbons, while 18 in. deep accumulation pocket collects oil, sediment, and other contaminants. Excess flow port avoids blockage during periods of high water flow.

This story is related to the following:
Chemical Processing and Waste Management
Architectural and Civil Engineering Products

Search for suppliers of: Storm Drain Filtration Systems | Drainage Filters

Articulating Chamber suits septic leach field applications.

info@productnews.com (ThomasNet News) — Fri, 24 Mar 2006 07:05:00 -0500

Featuring injection molded, lightweight design, BioDiffuser ARC 36 offers 20° integral articulating joint suited for straight or contoured septic leach field applications. True corrugated design eliminates flat surfaces and optimizes load bearing capability in trench. Modified post and dome engagement mechanism adds strength at critical joint connections. Measuring 5 ft long, ARC 36 can be installed by one person into 3 ft wide trench.

This story is related to the following:
Architectural and Civil Engineering Products

Search for suppliers of: Leaching Chambers

Retention/Detention Chamber manages storm water runoff.

info@productnews.com (ThomasNet News) — Mon, 20 Mar 2006 07:06:13 -0500

Engineered with secure, overlapping joints, sidewall openings, and open bottom, LandSaver(TM) meets demands of subsurface storm water management applications. Open bottom design retains storm water and then lets it infiltrate slowly into soil, assisting in recharging groundwater. Chamber can also be used for detention to relieve peak flows through outlet control structure. Chamber suits commercial, industrial, recreational, and residential developments.

This story is related to the following:
Architectural and Civil Engineering Products

Search for suppliers of: Drainage Chambers | Stormwater Management Products | Stormwater Containment Products

Underground System manages stormwater runoff.

info@productnews.com (ThomasNet News) — Thu, 05 Jan 2006 07:06:37 -0500

Engineered to stabilize stormwater runoff, Optimizer(TM) underground detention system contains flow control devices that use pressure head to begin immediately discharging at max allowable rate from multiple orifices. Corrugated metal pipe detention solution reduces required storage volume as well as excavation and backfill requirements. Multiple sizing tanks, set up independently, accommodate equally for all storms that need to be met by designer.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Architectural and Civil Engineering Products

Search for suppliers of: Stormwater Management Products | Drainage Systems

Filter System retrofits to stormwater catch basins.

info@productnews.com (ThomasNet News) — Fri, 26 Aug 2005 09:38:11 -0500

Fit to any flat-grated or combination curb-grated catch basin, EnviroSafeâ"¢ captures and retains pollutants from stormwater run-off. Product provides over 7 ft³ of storage for sediment (28 x 44 in. size) and employs hooded bypass that eliminates flooding potential while retaining captured sediment and debris. Available in rectangular and circular configurations, product accepts cartridges that may be configured to target particular pollutants.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Waste Handling Equipment
Architectural and Civil Engineering Products

Search for suppliers of: Waterworks Filters | Wastewater Filters | Sediment Filters | Strainer Filters | Stormwater Containment Products

Stormwater Chamber suits septic applications.

info@productnews.com (ThomasNet News) — Fri, 17 Jun 2005 08:01:30 -0500

Recharger® 150 detention/retention chamber measures 8.5 ft long, 33 in. wide, and has storage capacity of 160 gal. It includes built-in endwall on each chamber and overlapping rib connection for easy installation and strong connection between chambers. Constructed of high-density polyethylene, chamber is resistant to chemicals contained in parking lot runoff.

This story is related to the following:
Architectural and Civil Engineering Products

Search for suppliers of: Drainage Chambers | Stormwater Management Products

Software models stormwater/wastewater collection systems.

info@productnews.com (ThomasNet News) — Thu, 21 Apr 2005 07:54:28 -0500

Available for power ArcGIS (ESRI, Redlands, CA) users, InfoSWMM v2.0 sewer network analysis program provides GIS-centric modeling and design solution for management and operation of stormwater and wastewater collection systems. Urban drainage modeling product integrates all operations of sanitary, storm, and combined sewer system in one geoengineering environment, optimizing BMP and LID designs. Software includes multiple reporting and graphics features.

This story is related to the following:
Software
Architectural and Civil Engineering Products

Search for suppliers of: Modeling Software | Stormwater Management Products

Storm Water Chambers offer design flexibility.

info@productnews.com (ThomasNet News) — Thu, 02 Sep 2004 07:48:09 -0500

StorMasterâ"¢ storm water management system incorporates chambers, injection molded in high-density polypropylene, that ensure uniform sidewall leaching ports on each unit. Each chamber is 50 in. long and weighs 43 lb, allowing one-person handling. Chambers are available with prefabricated inlets and are equipped with carrying handle that promotes safe installations. Amount of inspection/vent ports promotes jobsite and maintenance flexibility.

This story is related to the following:
Architectural and Civil Engineering Products

Search for suppliers of: Stormwater Management Products

Electrocoagulation System produces recyclable water.

info@productnews.com (ThomasNet News) — Mon, 24 May 2004 07:40:54 -0500

Stormwater Management Electrocoagulation Systemâ"¢ uses controlled electrical current to remove multiple contaminants from industrial wastewater, washwater, and stormwater. Monitored and maintained by on-board control system, system reduces operator time by 95% and draws approximately 15 A on 230 V, 3-phase circuit at 5 gpm. Use of electrocoagulation water processing system results in nearly 100% of cleaned water that can be recycled.

This story is related to the following:
Waste Handling Equipment
Architectural and Civil Engineering Products

Search for suppliers of: Water Treatment Systems | Stormwater Treatment Systems

Catch Basin Insert complies with EPA storm-water regulations.

info@productnews.com (ThomasNet News) — Thu, 10 Jul 2003 07:46:05 -0500

STORM SENTINELâ"¢ Adjustable Catch Basin Insert eliminates non-point-source oil and other contamination of water supplies. Insert, with optional Non-Leaching Co-Polymer sock, traps oil, grease, sediment, litter, and debris carried in runoff. Self-supporting product, made of 8 oz, non-woven, geotextile fabric, has overflow rate of 300 gpm max. Rectangular type fits drains from 16 x 20 to 24 x 36 in, while round type fits drains with 27â�"29 in. diameter.

This story is related to the following:
Architectural and Civil Engineering Products

Search for suppliers of: Stormwater Containment Products

Dike diverts liquid without absorbing it.

info@productnews.com (ThomasNet News) — Wed, 11 Jun 2003 07:34:31 -0500

SPILLBLOCKER® Dike confines liquid with two 5 ft dikes and keystone connectors. Sections can be combined to form longer dikes. Made of flexible polyurethane, non-absorbent material resists oil, water, and many chemicals. Reusable, 3 in. high 2-layer construction features hard top layer and soft, tacky bottom. Product is available in yellow, black, and lime green with available corners to create a 45° angle between dikes.

This story is related to the following:
Waste Handling Equipment
Architectural and Civil Engineering Products

Search for suppliers of: Dikes | Hazardous Material Containment | Spill Kits | Spill Containment Systems | Spill Control Products

Snow Shieldâ"¢ protects filters by melting snow.

info@productnews.com (ThomasNet News) — Thu, 26 Dec 2002 07:37:40 -0500

Deep pocket design prevents snow from clogging air filters and diminished air flow into buildings. Design also provides constant drainage, prevents refreezing of snowmelt, and eliminates stagnant water pools. Extracting snow flakes from air as it enters buildings, product installs into factory built air handlers and field built HVAC systems. It is available in various panel sizes for 3,000â�"30,000 cfm range; multiple panels can handle over 100,000 cfm.

This story is related to the following:
HVAC
Materials and Material Processing
Architectural and Civil Engineering Products

Search for suppliers of: Snow Melting Systems | Air Handling Systems | Ice & Snow Melters | Snow Filters

Fluid Containment Dike is chemical resistant.

info@productnews.com (ThomasNet News) — Wed, 16 Oct 2002 07:41:28 -0500

Flexible, reusable PIG® SPILLBLOCKER® Dike, in high-visibility lime green, promotes safety and reduces tripping hazards. Constructed of 100% polyurethane, dike contains and diverts flow of liquids without absorbing them. It is available in 4½ and 6¾ in. sizes for controlling different volumes of liquid. Built-in connectors at each end allow 5 ft long dikes to be connected to reach desired length.

This story is related to the following:
Architectural and Civil Engineering Products

Search for suppliers of: Dikes