ThomasNet Industrial Newsroom -

Circulation Heater suits gas and liquid applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Sep 2008 07:41:16 -0500

Constructed of helical coiled tube cast into aluminum body with replaceable cartridge heater in center, CAST-X 500 is intrinsically safe and will not burn fluids. Stainless steel fluid path assures compatibility with various materials. Non-welded construction supports operation up to 3,000 psi and 350Â°F, minimizes potential leakage, and self drains when mounted vertically. Since gas or liquid never come in contact with heater, CAST-X 500 suits applications requiring fluid cleanliness.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Gas Heaters | Circulation Heaters

Heater and Furnace recycle used oils into free shop heat.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 28 Aug 2008 07:42:18 -0500

Rated for 250,000 BTU input, RA-250 standard unit space heater and RAD-250 ductable furnace offer full swing-out door, large service panels, and maintenance/service shelf to facilitate combustion chamber and heat exchanger access. Along with oil-preheating system, backflow ash/draft sensor, and operation hour meter, units incorporate air atomizing burner, on-board air compressor, positive displacement fuel metering pump, and automatic thermostat-controlled operation.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Space Heaters | Fuel Oil Heaters | Industrial Oil Fired Furnaces

Medical Equipment Heaters have polyimide film construction.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 19 Aug 2008 07:42:53 -0500

Custom-designed to meet application and power supply needs, flexible polyimide heaters can operate in temperatures down to -319Â°F. Polyimide construction, resistant to radiation, solvents, and chemicals, exhibits tear resistance, dimensional stability, and minimal outgassing. Products are suited for medical device applications and clinical diagnostic instrumentation requiring low-mass heaters. Examples include IV heaters, respirators, and eye surgery endoscope warmers.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation
Health, Medical and Dental Supplies and Equipment Sponsored by: Siemens Corporation - Banner w/DoubleClickTags

Search for suppliers of: Flexible Heaters | Custom Heaters | Medical Equipment Heaters

Flexible Heaters wrap and bend while providing uniform heat.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Aug 2008 07:43:33 -0500

Sandwiched between layers of flexible insulation, etched foil or wire-wound heater elements can have uniform or profiled heat patterns. Heaters can integrate temperature sensors, flex circuits, instruments, or other electronics to provide total heating solution. End-users can choose from various standard configurations or request custom heating solution. Available types include Polyimide (KaptonÂ®) Thermofoil(TM), Silicone Rubber, Thermal-Clear(TM), Mica, and All-Polyimide Heaters.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Etched Foil Heaters | Flexible Heaters | Mica Heaters | Silicone Rubber Heaters

Line Heating System features modular design.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Aug 2008 08:07:43 -0500

Offering precisely controlled heat distribution, RELIALINE(TM) 170 is automatically self-regulating for temperature uniformity. System fits outer diameter of standard tubing, creating close contact with maximum surface coverage. Internal rails are spring loaded to allow for click-on fit and maximum contact force for optimal thermal transfer. Incorporating double pane design that uses air as insulator, insulation system ensures outside surface temperatures are safe-to-touch.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Heaters | Process Heaters | Pipeline Heaters

Thick Film Heaters optimize temperature uniformity.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 25 Jul 2008 07:42:19 -0500

Developed to address photovoltaic industry's transition to processing PV cells on large glass, stainless steel, and polymer substrates, Large Thick Film Flat Panel Heaters can be produced in single sheets or array of small heaters to achieve dimensions of larger than 47.24 x 55.11 in. with process heater temperatures up to 1,022Â°F. Units are suited for both atmospheric and vacuum environments, and with single-piece construction, they can be manufactured with .13 in. profile.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Polymer Thick Film Heaters

MEMS Micro Hot Plates suit chemical sensor applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jul 2008 07:29:55 -0500

Featuring platinum resistive thin-film microheater attached between freestanding thin-film silicon nitride and silicon dioxide membranes, KMHP-100 MEMS microhotplate can operate continuously at up to 650Â°C. It consists of micromachined silicon die attached to gold-plated TO-18 package, which insures stable operation in harsh/hostile environment. Freestanding thin-film silicon nitride membrane thermally/electrically isolates platinum microheater from silicon substrate microstructure.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Hot Plates | Microelectromechanical Systems (MEMS)

Clear Heaters deliver heat while transmitting light.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jun 2008 07:42:44 -0500

Featuring micro-thin, etched foil or wire-wound elements sandwiched in between optical-grade polyester sheets, Thermal-Clear(TM) Heaters provide uniform or profiled heat patterns without blocking light. Units can integrate temperature sensors, flex circuits, controllers, or other electronics to provide total heating solution. Available in sizes up to 280 x 560 mm, heaters are RoHS-compliant and suitable for heating LCDs, cockpit displays, outdoor card readers, and portable military radios.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Transparent Heaters | Etched Foil Heaters

Electric Process Heater offers 4,160 V operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:31 -0500

Available in capacities of 9 kW to 13 MW with flange sizes of 3-24 in., 4kV Series(TM) electric process heater can be located away from its power source, such as 1 mile below grade for any down-hole oil production heater. It also enables multi-megawatt heating applications for heating and vaporizing water, steam, ammonia, and glycol. Unit is based on INFI-SEAL(TM) technology, which seals heating elements so they exhibit resistance to ground and do not absorb or retain moisture.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Heaters | Process Heaters

Unit Heater is built with explosion-proof design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 20 Jun 2008 07:38:18 -0500

In addition to T3C, 320Â°F ignition temperature code rating, ULTRA-SAFE(TM) EXP features dual over-temperature protection with automatic and manual reset over-temperature cutouts. Product uses non-toxic propylene glycol heat transfer fluid and has 70 psig relief valve setting. Three available corrosive-resistant construction options are available for use in dry, non-corrosive areas; wastewater treatment plants; and chemical plants where chlorides are present.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Unit Heaters | Hazardous Area Heaters | Explosion Proof Heaters

Induction Light Fixture suits hazardous environments.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Apr 2008 07:36:42 -0500

Rated for NEC Class I Division 2 locations, 165 W Mercmaster(TM) III delivers 100,000 hours of virtually maintenance-free operation. Unit features corrosion-resistant materials and operates safely in temperatures down to -50Â°C. Mercmaster(TM) III is suitable for industrial, chemical processing, and refining operations where flammable gases and vapors are present, as well as non-hazardous locations subject to extreme weather and excessive dirt and moisture.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Lighting Fixtures | Induction Fixtures

Preheater enables soldering at lower operating temperatures.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 28 Mar 2008 07:41:43 -0500

PCT-1000 Programmable Preheater is benchtop system delivering forced convection heat that can be controlled with 4 time and temperature zones and additional cooling zone. External thermocouple input can be used for control of output temperature based on board or component temperature and also as process monitor. Designed to create convection vortex, system can be operated in manual or programmable automatic mode where up to 50 thermal profiles can be stored.

This story is related to the following:
Materials and Material Processing
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Preheaters

Electric IR Spot Heater warms commercial decks and patios.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Feb 2008 07:55:51 -0500

Designed for commercial and residential deck and patio applications, HZE X5C 015 series has curved back design and compound reflective IRLens(TM) that focuses IR energy into central beam. Unit requires 1,500 W of electric power at 120-277 V and will raise temperature of people and objects in 14 ftÂ² area by 15Â° or more from 8 ft away. Heater can be wall-, ceiling- or post-mounted.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Electric Infrared Heaters | Patio Heaters | Infrared Heaters

Automatic Fill System features integrated adhesive melter.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jan 2008 07:35:40 -0500

Combining melter and adhesive feed system, ProBlueÂ® Fulfill(TM) System automatically maintains desired adhesive levels in melter tanks. Integrated capacitance sensor detects low adhesive levels and transmits signal to suction lance. Using vacuum, system conveys adhesive as pellets, pastilles, and mini-slats from supplied closed adhesive storage container directly to melter tank. Adding small quantities of adhesive at regular intervals prevents sealed tank from running dry.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Omni Metal Finishing, Inc. - Finishing with Excellence
Material Handling and Storage
Packaging Products & Equipment
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Glue Melters | Hot Melt Adhesive Machinery | Automatic Feeders

Nozzle Heater is suited for hot runner systems.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 11 Jan 2008 07:30:47 -0500

THERMASLEEVE(TM) Hot Runner Nozzle Heater comes with rapid thermal response that allows heat to be created precisely where it is needed. Designed to have intimate contact with surface of nozzle which optimizes heat transfer, it features laser structuring to create customized temperature profile. Self-clamping electric heater can be installed and removed from nozzle with custom installation and removal tool, and accommodates thermocouple secured to external body of heater.

This story is related to the following:
HVAC
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Nozzle Heaters

Compact Heaters utilize ceramic PTC technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Jan 2008 07:08:52 -0500

With rated power output to 1,500 W, PTC Heaters can accommodate wide array of self-regulating PTC thermistor elements, which operate at nearly constant temperature over range of voltage and environmental conditions. Heaters require no thermostat and have virtually unlimited life with no moving parts. Applications include space heaters, CCTV cameras, mat/cushion heaters, telecommunications equipment, and vehicle/windshield heaters.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Positive Temperature Coefficient (PTC) Heaters

Indirect Heating Systems offer clean heat to workspaces.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 13 Dec 2007 07:49:13 -0500

Self-contained models HD-7.5 and HD-3, along with process air blower that allows for single-point power and duct connections, integrate indirect fired heat exchanger designed to keep products of combustion and moisture separate from conditioned air. Both feature adjustable air flow and safe control of outlet temperature. HD-7.5 has 100Â°F temperature rise at 8000 SCFM with high temperature limit of 230Â°. HD-3 has 100Â°F temperature rise at 2500 CFM with high temperature limit of 179Â°.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Indirect Fired Heaters

Bulk Melt Systems include performance enhancing parts.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 03 Dec 2007 07:42:28 -0500

Designed for quiet operation and optimal process efficiency, Therm-O-Flow 20 and 200 incorporate NXT(TM) Air Motor, Mega-Flo(TM) platen, and sensors that signal when drum changes are needed. EasyKey(TM) control displays actual and set point temperatures, and material totalizer can be reset to track material usage. Along with 7-day automatic startup timer, systems feature self-diagnostics support, which allows for predictive and preventative maintenance strategies.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Glue Melters

Adhesive Melters deliver optimized flexibility and control.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 08 Nov 2007 07:43:52 -0500

Suited for product assembly, packaging, and paperboard converting operations, AltaBlue(TM) TT melters use variable-speed ac motors with spur gear pumps and process range of materials. All-electric solutions, used in manual, semi-automatic, and automatic applications, have TeflonÂ®-coated tube tank that eliminates dead corners and minimizes adhesive char. To facilitate operation, features include status-at-a-glance indicators and 7-day clock.

This story is related to the following:
Packaging Products & Equipment
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Glue Melters | Hot Melt Equipment

Waste Oil Heaters range from 155,000 to 500,000 btu.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 24 Oct 2007 07:47:21 -0500

Offering alternative to disposing of used oil, Waste Oil Heaters come in 4 models with integrated air compressor that produces clean, dry air and eliminates need for shop air plumbing. Multi-directional air louvers give user ability to direct heat where they need it, while swing-out removable burner enables access for cleaning and maintenance.

This story is related to the following:
Thermal and Heating Equipment Sponsored by: TEMPCO - Electric Heater Corporation

Search for suppliers of: Oil Fired Heaters