ThomasNet Industrial Newsroom -

Bottle Caps prevent escape of chemicals and solvent vapors.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 21 Nov 2008 07:41:28 -0600

Suited for laboratories, Omnifit® T-Series bottle caps and accessories feature PTFE inner portion for chemical compatibility. Units have anti-twist design that allows inner body of cap to spin freely, and prevent tubes from becoming twisted when cap is fitted or removed. This eliminates need to disconnect fluid lines before unscrewing cap. They require no fittings, and standard 1/8 in. laboratory tubing is pushed through luer ports on top of cap.

This story is related to the following:
Laboratory and Research Supplies and Equipment
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Packaging Products & Equipment

Search for suppliers of: Laboratory Instruments | Laboratory Tubing | Can & Jar Bottle Caps

Caps protect cap screws and socket heads.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 10 Jul 2008 07:28:27 -0600

Hexagon cover caps start at size M5 and increase to M16 with socket head version available from M5 to M20. Black polyethylene hexagon cover caps are protect hexagon bolts and nuts from foreign inclusions and grey polyethylene socket heads protect hexagonal holes of cap screws.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Plastic Caps | Bolt & Nut Caps | Socket Caps

Tethered Vinyl Cap can be removed and reapplied frequently.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 03 Jul 2008 07:29:48 -0600

Used as protective cover for wide variety of fittings, pipe ends, or threaded connectors, tethered vinyl cap features tethered end that allows cap to hang freely from application when not in use. It features high gloss finish with smooth, contoured ends and smooth flat top. Cap does not tear when stretched, rip when slipped over sharp edges, or shred when forced over threaded fittings.

This story is related to the following:
Packaging Products & Equipment
Plant Furnishings and Accessories

Search for suppliers of: Vinyl Caps | Protective Covers | Vinyl Covers

Polyethylene Caps provide thread protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Mar 2008 08:14:15 -0600

Suited for automated feed systems, CAT Series Caps offers product protection with flexibility to remove and replace cap as needed. Units are molded in low-density polyethylene with LDPE service temperature of 150°F. Designed to protect products with or without O-rings, caps are natural in color and available for standard, NPT, and metric thread protection.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Thread Protector Caps | Plastic Caps

Protective Caps seal M8 threaded connectors to IP67.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 28 Aug 2007 07:43:22 -0600

Suited for use in factory automation and process control applications, Series M8 protective caps feature PA (polyamide) body, PUR (polyurethane) retaining strap, and nitrile rubber (NBR) seal. Caps for use on cable plugs include retaining ring which allows cap to be fixed onto cable. When caps are correctly applied to unmated connectors, they ensure that connectors are waterproof to 1 m depth for 30 minute time period.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Thread Protector Caps | Connector Caps

Plastic Caps come in various colors, textures, and sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 21 Aug 2007 07:45:03 -0600

Offered in range of colors and chemical formulations, vinyl plastic caps protect products from edge, thread, contaminant, and transit damage and can also be used as masks for plating, painting, and coating operations. Industrial-grade, dip-molded, flexible products come in standard diameters from .062-5.500 in., with molding capabilities up to 20 in. dia and 24 in. long. In addition to specialty material formulations, textures include high-gloss, matte, and foam finishes.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Vinyl Caps | Plastic Caps

Closure targets automated capping operations.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 27 Jul 2007 08:03:32 -0600

Preserving concentric shape of caps via nested stack, 120 Deep Skirt TaperStack(TM) Closure features stacking shelf that enables caps to nest together. Forming stacked logs protects the closures' shape during shipping and warehousing to maintain structural integrity. Tapered edge of caps reduces incidence of cross threading during capping operations, and closures are available with gloss or mat top, smooth sides or ribbed sides, or printed.

This story is related to the following:
Packaging Products & Equipment
Mechanical Components and Assemblies

Search for suppliers of: Custom Closures | Bottle, Can & Jar Closures | Can & Jar Bottle Caps

Polymer Caps feature non-sloughing design.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Jun 2007 07:43:39 -0600

Available in wide variety of sizes, Series MSS RQ2, DS Q3, and MSC YQ2 are made of inherently conductive polymer compound that meets stringent requirements of M5501/31 for non-sloughing conductive material. Caps will resist sloughing/crayoning when rubbed briskly against hard, flat laminated surface. They have volume resistance of 105 <font face='Symbol'>W</font> and include required electrostatic discharge symbol per ASTM D 5445, Symbol 28.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Plastic Caps

Protective Caps keep snap-in connectors sealed to IP67.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 01 Jun 2007 07:43:39 -0600

Designed for 620 Series snap-in connector system, Protective Caps are available for male and female cable connectors and panel-mount sockets. Caps for cable connectors include 125 mm strap, which can be used to secure cap, while caps for sockets include 70 mm strap, which can be mounted to panel. Using O-ring to provide IP67 seal, connectors with caps are suited for hand held devices and medical applications.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Packaging Products & Equipment

Search for suppliers of: Waterproof Connectors | Snap-In Connectors | Circular Connectors | Cable Connectors | Connector Caps

Custom Closures come in 63, 89, 110, and 120 mm sizes.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 30 May 2007 08:46:54 -0600

TaperStack(TM) caps feature stacking shelf located within each closure that enables caps to nest together, forming stacked logs that protect closures' shape during shipping and warehousing. They help improve consistency of proper seating on jars and packaging sustainability through source reduction, and reduce incidence of cross threading during capping operations. Offered with various rib finishes and liner innerseals, closures can be decorated with custom embossing, debossing, or printing.

This story is related to the following:
Packaging Products & Equipment
Mechanical Components and Assemblies

Search for suppliers of: Custom Closures | Plastic Bottle Caps

Caps are suited for high temperature masking.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Apr 2007 07:46:34 -0600

Designed to mask fittings during finishing processes such as powder coating, e-coating, or plating, HJS series can withstand temperatures up to 500°F. Featuring soft, flexible feel and pull-tab with special finger grips, caps maintain flexibility even after masking process is over. Pull-tab can be removed after processing or be left on as shipping protection.

This story is related to the following:
Materials and Material Processing
Packaging Products & Equipment

Search for suppliers of: Powder Coating Masks | Plating Masks | Rubber Caps

Aseptic Vial Cap prevents lyophilized drug contamination.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 17 Nov 2006 07:41:39 -0600

Useful in pharmaceutical laboratories, .5 or .8 in. plastic Lyoseal cap seals vial and its standard stopper in one step inside lyophilizer's sterile environment eliminates risk of microbiological contamination. Product enables sealing of all medicine vials in lyophilizer itself in (class A) aseptic area, eliminating crimping and re-handling operations. Stopper top remains sterile when end-user removes flip-off cap, and cap cannot be put back on once it has been removed.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Tamper-Evident Caps | Plastic Caps

Security Cap System protects expensive/sensitive equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 24 Apr 2006 08:21:07 -0600

Cap-Lok(TM) protects equipment from theft by preventing access to nuts and bolts. Caps snap on to fasteners and are removable or can be permanently locked. Type B is solid cap for use on bolts and Type N is for application on nuts. Once product has been applied, it can only be removed by Cap-Lok(TM) unlocking device. Uses include securing surveillance cameras, ATMs, vending machines, hospital equipment, or items that are not to be removed by unauthorized personnel.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Packaging Products & Equipment

Search for suppliers of: Security Bolts | Bolt & Nut Caps

Electrical Connector Caps are made of polyethylene.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 12 Apr 2006 08:06:28 -0600

Polyethylene electrical connector caps are designed to protect male-threaded electrical connectors from dents as well as dust and moisture. They include flange feature that is devised to assist in insertion and removal of cap. All products conform to MIL Standard Spec MS 90376.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Plastic Caps | Connector Caps

End Caps protect ends of tubes, pipes, or rods.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 07 Apr 2006 08:05:42 -0600

Compliant with ASTM, MIL, and NAS standards, polyethylene end caps are suited for protecting tube ends during shipping. They provide snug friction grip for positive seal in low-pressure situations, and are available in more than 27 sizes.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Tube End Caps | End Caps

Display Panels come in plain or full-featured versions.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 23 Aug 2005 10:26:46 -0600

End Cap/Power Panels are available in basic version measuring 14.5 x 4 x 48 in. and come in powder coated colors. Each includes universal mounting hardware with ties, screws, and metal brackets for installation onto any gondola, shelf unit, or vertical surface. Fully outfitted selling system versions come with header sign holder, hooks, and open wire shelves in addition to shelf edge and hook label holders, and 2 styles of side-wing vertical sign holders.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: End Caps

Pipe End Caps are machined from 6063 aluminum.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 06 Jul 2005 07:58:24 -0600

Type A Machined Drive-On End Caps, Type E Flat Machined Drive-On Disks, and Type G Machined Drive-On Caps can be used with Schedule 40 pipe sizes ranging from ??2? in. Knurled sleeve design allows for secure interior connection to pipe with no welding. Aluminum matches alloy of most pipe and allows cap to be color anodized.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Packaging Products & Equipment

Search for suppliers of: End Caps | Pipe Caps

Pull-Ring Plugs offer product protection.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 22 Mar 2005 06:55:39 -0600

Series PR protects OEM parts and products during shipping, storage, and masking or other operations. Tapered-style, low-density polyethylene units feature built-in lift rings to facilitate removal and are available to fit NPT, SAE, and JIC sizes. Seventeen sizes are offered to plug openings from 0.361â�"2.49 in. Plug depths range from ¼â�"½ in., and outer diameter of pull rings ranges from 0.745â�"3.075 in.

This story is related to the following:
Packaging Products & Equipment

Search for suppliers of: Plastic Plugs | Thread Protectors

Bushings and Plugs accommodate panels up to 0.250 in. thick.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 10 Feb 2004 07:37:21 -0600

Bushings and Plugs are available in 10 sizes that fit ½â�"2 in. dia access holes for electrical and telecommunications cables, tubing, hose, rope, and utility lines. They fill un-used panel ports; prevent debris, insect, or moisture penetration; and provide abrasion resistance and vibration resistance to through-routed wires. Bushings and plugs snap into holes without using tools and withstand pushback forces up to 35 lb. They are constructed from high-impact Type 6/6 nylon.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Fluid and Gas Flow Equipment Sponsored by: Parker Hannifin Corporation Pneumatic Division - Engineering Your Success - The Global Leader in Motion & Control Technologies
Packaging Products & Equipment

Search for suppliers of: Abrasion Resistant Bushings | Snap Bushings | Cable Protectors | Conduit Protectors | Insulating Bushings | Hole Plugs

Protector Caps cover exposed ends to prevent worker injury.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 04 Nov 2003 11:32:42 -0600

Used around construction sites, PC-110 BarGard® caps protect workers from serious injury from exposed rods, rebar, pipe-end, and stems. They meet CAL OSHA Standards and fit Rebars No. 3â�"8, 3/8 to 1 in. dia. Products are bright lime green in color for visibility and withstand varied weather and temperature conditions. They install by slipping on and locking into place.

This story is related to the following:
Packaging Products & Equipment
Safety and Security Equipment
Mechanical Components and Assemblies

Search for suppliers of: End Caps | Safety Equipment & Supplies