ThomasNet Industrial Newsroom -

Natural Gas Engine targets gas compression applications.

info@productnews.com (ThomasNet News) — Tue, 17 Nov 2009 08:44:52 -0500

Rated 3,375 bhp at 1,000 rpm, 12-cylinder Model 12V275GL includes Engine System Manager, which optimizes engine performance by integrating spark timing control, turbocharger control, speed governing, knock detection, start-stop control, diagnostic tools, fault logging, engine safeties, and air/fuel ratio control. In addition, engine includes factory-mounted lube oil and cooling systems, and oil filtration system with plate-type oil cooler and spin-on disposable lube oil filter elements.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Natural Gas Engines

Diesel Hybrid Electric Powertrain provides all-wheel drive.

info@productnews.com (ThomasNet News) — Wed, 28 Oct 2009 08:34:09 -0500

Configurable for specialized military and commercial applications, 4-wheel Q-Force features SCADA system, hybrid control system that minimizes battery size through optimized charge controls and regenerative braking, and advanced traction motor/transmission system. In one configuration, diesel engine produces 75 hp, while electric motor provides 133 hp, and power train yields 5,463 lb-ft of torque after reduction.

This story is related to the following:
Mechanical Power Transmission
Controls and Controllers
Green & Clean

Search for suppliers of: Powertrain Components | Motor Drives | Electric Motor Drives

Fuel Injection Engines feature electronic control unit.

info@productnews.com (ThomasNet News) — Mon, 16 Mar 2009 08:30:09 -0500

Available in 653 or 720 cc configurations, EH72 V-Twin and EH72 UTV deliver outputs from 20-27 hp, suitable for welders, generators, pressure washers, and lawnmowers. Engines feature 2-barrel manifold with fuel injector for each cylinder, allowing cylinders to operate independently of each other. Using sensors to detect manifold pressure, ambient temperature, and throttle position, Electronic Control Unit constantly relays information to injector, which delivers proper air-to-fuel ratio.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Lawn & Garden Equipment Engines | Gasoline Engines

Diesel Generator provides mobile power.

info@productnews.com (ThomasNet News) — Wed, 03 Sep 2008 07:35:18 -0500

Measuring 30 ft long, trailer-mounted 800 kW Rental Power Unit features Cummins QSK23-G7 engine, which meets Tier 2 emissions requirements. Unit addresses loads between 500-1,000 kW and offers fuel storage safety with 110% fluid containment system. Cooling system allows generator to operate in temperatures up to 122°F. Generator's container is insulated with sound attenuation to keep noise levels down.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Portable Diesel Engines

Jet Engines minimize environmental emissions and noise.

info@productnews.com (ThomasNet News) — Tue, 29 Jul 2008 07:58:09 -0500

PurePower(TM) PW1000G engine features gear system allowing engine's fan to operate at different speed than low-pressure compressor and turbine. It is designed for use in Mitsubishi Regional Jet and Bombardier CSeries. Selected to power Citation Columbus business jet, PurePower PW810C incorporates fan, compressor, turbine, and low-emissions TALON(TM) combustion system. Both centerline engines feature efficient fuel burn and are capable of operating on alternative fuels.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Jet Engines

Type 6, 24-Cylinder Gas Engine runs on natural gas.

info@productnews.com (ThomasNet News) — Tue, 26 Jun 2007 07:52:09 -0500

Designed for commercial on-site power applications, J624 GS Jenbacher gas engine outputs up to 4 MW and provides fuel flexibility (including landfill and coal mine gas or alternative fuels). It produces 3.6 MW of heat, allowing for overall plant efficiencies up to 90% while requiring 870 m³ of natural gas per hour. Lean burn, turbocharged, and mixture-cooled engine offers high heat recovery rate via customer-tailored, hydraulic integration of heat exchangers.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission
Green & Clean

Search for suppliers of: Electric Generator Sets | Natural Gas Engines

Diesel Engine meets Tier 2 emissions requirements.

info@productnews.com (ThomasNet News) — Wed, 03 Jan 2007 07:30:23 -0500

Designed for minimal noise and optimal fuel economy, power delivery, and idle stability, QSK38 employs in-cylinder combustion system that meets Tier 2 NOx levels. Modular Common Rail fuel system enables full-authority electronic control over fuel timing, quantity, pressure, and delivery rate shape. Supplied in 38 L, V12 configuration with single-piece FCD pistons, engine is rated from 900-1,500 hp and provides up to 4,570 lb-ft torque at 1,000 rpm.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Diesel Engines

Engines power commercial equipment.

info@productnews.com (ThomasNet News) — Thu, 26 Oct 2006 07:45:38 -0500

Suited for use with 5.5-6.5 hp commercial equipment, CP550 and CP650 single-cylinder engines have compact Overhead Valve design, dual ball bearing crankshaft, and Dura-Bore cast iron cylinder sleeve. One-start carburetor enables one-pull starts and promotes smooth operation. Along with fuel shut-off valve and Lo-Tone muffler, engines incorporate high-mount oil-fill, low-oil sensor, and panel-style air filter with pre-cleaner and debris-ejection slots.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Industrial Engines

Commercial Power Engines come in vertical shaft models.

info@productnews.com (ThomasNet News) — Thu, 26 Oct 2006 07:45:37 -0500

Vanguard(TM) V-Twin BIG BLOCK(TM) air-cooled engines are offered in vertical shaft models, 895 and 993 cc, for powering commercial applications. Along with centrifugal, multi-stage industrial air cleaner, engines incorporate debris management system that allows for cool and clean operation. Both models, based on V-Twin/Overhead Valve technology, feature aluminum block and steel-backed aluminum bearings. Tuned intake and exhaust systems minimize noise.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Air Cooled Engines

Irrigation Pump Engine produces ultra-low exhaust emissions.

info@productnews.com (ThomasNet News) — Thu, 27 Jul 2006 08:10:17 -0500

Designed for extended duty applications, 120 hp, natural gas-fueled Model ENP 8.1 is based on Greenergy(TM) Technology, which supports organic agricultural systems. Technology combines induction system refinements, combustion chamber re-design, optimized air-fuel mixing, exhaust flow control and treatment, and electronic engine controller incorporating software tailored to meet application requirements. Engine produces less then 0.05 g/hp-hr of Nox and less than 0.60 g/bhp-hr of CO.

This story is related to the following:
Mechanical Power Transmission
Services

Search for suppliers of: Pumping Engines | Industrial Engines

Engines are suited for power generators and AG pumps.

info@productnews.com (ThomasNet News) — Fri, 14 Jul 2006 08:06:49 -0500

Featuring cylinder heads that perform at 20,000 hr life-cycle span, Endura(TM) integrated systems provide on-site, continuous-duty power utilizing multi-fuel energy sources. They can produce electricity in tandem with, or independent of, utility grid systems or direct shaft power. Products are suited for fielded power generation units as well as low-emissions agricultural (AG) irrigation pumps.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Power Transmission

Search for suppliers of: Natural Gas Engines | Industrial Engines | Engines

Diesel Engines are compliant with emission regulations.

info@productnews.com (ThomasNet News) — Mon, 23 Jan 2006 07:05:40 -0500

Available in 8-, 12-, and 16-cylinder models, Vector Diesel Engines offer displacements of 20, 30, and 40 L and gross power ratings of 1,184, 1,777, and 2,368 hp, respectively. They have V-type cylinder configuration with 4 valves per cylinder. Featuring high-pressure common rail injection system, engines are turbo-charged, aftercooled, and can be configured to meet any application in industrial, marine, and power generation industries.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Diesel Engines

Slant Cylinder Engine has overhead valve design.

info@productnews.com (ThomasNet News) — Fri, 30 Sep 2005 07:41:03 -0500

Weighing 68 lb with height of 17.32 in., EH36 OHV slant cylinder 4-cycle engine offers max power output of 11.5 hp and meets EPA Phase 2 and CARB Tier II requirements. Features include aluminum alloy block, cast iron cylinder liner, and forged steel crankshaft with dual ball bearing support. QuickStart® starting system and HotSpark® electronic ignition system enable one-pull starts. Engine is suited for use in construction, rental, and agricultural equipment.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Tractor Engines | Lawn & Garden Equipment Engines | Construction Equipment Engines

V-Twin Cylinder Engines help lower fuel consumption.

info@productnews.com (ThomasNet News) — Wed, 24 Aug 2005 08:58:56 -0500

Suited for industrial and construction equipment, V-Twin cylinder 4-cycle OHV (overhead valve) gasoline engines provide smooth torque throughout rpm range. All models feature aluminum alloy block, cast-iron cylinder liners, and forged steel crankshaft in addition to full pressure lubrication system with trochoid type oil pump and air cleaner with dual elements. Offered in 18â�"25 hp models, engines meet EPA Phase 2 and CARB Tier II requirements.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Industrial Engines

OHV Engine provides max output of 13.5 hp.

info@productnews.com (ThomasNet News) — Tue, 23 Aug 2005 10:26:45 -0500

Featuring overhead valve design, Subaru Robin EH41 slant cylinder, 4-cycle engine is designed with aluminum alloy block, cast-iron cylinder liner, and forged steel crankshaft with dual ball-bearing support. Splash type lubrication system and large capacity air cleaner with dual elements provide protection. Engine offers one-pull starts by teaming QuickStart® starting system and HotSpark® electronic ignition system with automatic decompression system.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Compressor Engines | Gas Engines

Industrial Engines suit mobile and stationary applications.

info@productnews.com (ThomasNet News) — Thu, 19 May 2005 07:59:52 -0500

Four-cycle, 4-cyl Vortec 3000 is available in factory-installed multiport fuel injection gasoline version, and gaseous fuel version with 35 kW genset rating. With MPFI version, fuel injectors are positioned in intake ports of cylinder head and spray fuel on back of intake valves, promoting complete combustion. On high-output gaseous fuel engine, cylinder head combines with 10.5:1 compression ratio, resulting in ratings of 65 and 60 hp at 1,800 rpm with propane and natural gas, respectively.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Gasoline Engines

Generator Drives provide power ratings of 353â�"558 hp.

info@productnews.com (ThomasNet News) — Thu, 08 Jul 2004 07:33:15 -0500

Comprised of base engine, cooling system, and air filter, Cursor Gen-Drives connect to any power generator. Diesel engine, with 4 valves per cylinder, features electronic management of high-pressure fuel injection system, which cuts fuel consumption values to 0.325 lb/hphr. Rear-gear drive design enables noise levels to stay below 95 dBA. Available in 50 and 60 Hz versions with 12 or 24 V electrical system, Gen-Drives meet EPA Tier 2 and EC 97/68 Stage 2.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Generator Drives | Diesel Engines

Mini Four-Cycle Engines suit hand-held equipment.

info@productnews.com (ThomasNet News) — Fri, 04 Jun 2004 08:05:43 -0500

Models EH035 and EH035V are overhead valve engines that are horizontally and vertically mounted, respectively. Air-cooled, single-cylinder units produce max power output of 1.6 hp and use standard automotive gasoline and engine oil. Weighing 8 lb, engines feature silicone-constructed, abrasion-resistant, aluminum piston; chrome-plated cylinder; forged-steel rocker arm, and powder-metal-inserted cam gear. Lubrication system offers 360° operation.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Air Cooled Engines | Gasoline Engines

Diesel Engines range from 240â�"493 hp.

info@productnews.com (ThomasNet News) — Thu, 13 May 2004 07:45:57 -0500

CURSOR Series consists of 6-cylinder, 24-valve diesel engines that can be configured to meet applications in industrial, agricultural, marine, and power generation industries. Available in 8, 10, and 13 liter versions, engines have total electronic control to monitor operating conditions. Compliant with emission and noise regulations, engines feature noise level below 95 dBA at maximum power. Select models offer variable geometry turbochargers.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Diesel Engines

Compact Engine suits power generation applications.

info@productnews.com (ThomasNet News) — Mon, 15 Mar 2004 07:37:10 -0500

Hitting 20 kVA power node, 404C-22G ElectropaK is offered in 50 and 60 Hz specifications with ratings of 1,500, 1,800, and 3,000 rev/min. Complying with all emissions legislation, it emits 2 Bosch Smoke Units and bare engine noise to 3 bB(A). Cooling pack, coupled with low air filter position, enable engine to provide optimum power density. Single canopy cross section fits entire range, and regular service intervals occur every 500 hr.

This story is related to the following:
Mechanical Power Transmission

Search for suppliers of: Industrial Engines