ThomasNet Industrial Newsroom -

Chiseling Hammer is designed for optimal user control.

info@productnews.com (ThomasNet News) — Thu, 12 Feb 2009 08:29:24 -0500

Measuring 18 in. long and weighing less than 17 lb, SDS-max MHE 56 provides 0-2,840 bpm with up to 14 J/impact, suited for precision removal of concrete and stone. It features 14 A motor, Vario Tacho Constamatic electronic soft start, and service indicator light. D support handle has integrated damping system and can be fitted at 3 different points on tool, and chisel is lockable in 12 positions. Tool comes with auto-stop carbon brushes and carbon brush wear indicator.

This story is related to the following:
Portable Tools

Search for suppliers of: Concrete Chisels | Chipping Hammers | Power Tools

Drilling and Chiseling Tool suits construction applications.

info@productnews.com (ThomasNet News) — Wed, 06 Sep 2006 07:42:41 -0500

Weighing 17.4 lb, TE 76-P utilizes 1,400 W motor and incorporates internal theft-protection system. It has drilling range from ½-6 in. dia and works with selection of chisels. For additional control, product incorporates active torque control device, which constantly monitors tool rotation of tool and disengages drive system if it senses housing beginning to rotate quickly. Unit is capable of drilling into wood or steel, setting anchors, and mixing grouts.

This story is related to the following:
Portable Tools

Search for suppliers of: Chisels | Hand Drills

Chisel and Punch Tools are designed for safe use.

info@productnews.com (ThomasNet News) — Mon, 21 Mar 2005 09:20:32 -0500

Chisel and punch product line features unbreakable polymer cap and oil-resistant cushion grip for worker safety and ergonomics. Tool design helps reduce noise, vibration, and spalling associated with hand struck tools, while optimizing cutting force and durability. Striking surface eliminates flying chips as well as mushrooming heads.

This story is related to the following:
Portable Tools

Search for suppliers of: Chisels | Punching & Shearing Tools

Chisel separates spot welded/bonded panels.

info@productnews.com (ThomasNet News) — Mon, 07 Feb 2005 08:30:13 -0500

Model P/N 20015 Seam Buster Chisel is designed for use on quarter panels, rockers, and any other pinchweld. It is sharpened on 2 edges. Sharp end allows for penetration between panels and side edge allows for side impact to drive panels apart without damage. It is made from alloy steel and has cushioned handle to absorb shock.

This story is related to the following:
Portable Tools

Search for suppliers of: Hand Tools | Chisels | Small Tools

Chisels are suited for remodelers and contractors.

info@productnews.com (ThomasNet News) — Wed, 10 Nov 2004 07:58:04 -0500

Made of hardened steel, resharpenable SDS-max® R-Tec(TM) flat and bull point chisels feature 3-cutter geometry and reflection collar that facilitates material removal by maximizing tool impact. SDS-plus® Viper Flat Chisel utilizes 2 wedge shaped break-out teeth in addition to front and side cutters to produce maximum cracks and breakage. Tile Chisel has flat cutter and angle that enables unit to only remove desired tiles without breaking them.

This story is related to the following:
Portable Tools

Search for suppliers of: Floor Chisels

Short Blade Chisels are friction-welded for strength.

info@productnews.com (ThomasNet News) — Wed, 10 Mar 2004 07:39:50 -0500

FatMaxâ"¢ Short Blade Chisels provide extra strength in neck area where common breakage occurs. Blade is hardened and tempered high chrome, carbon alloy steel. Bi-material, high-impact handles feature steel striking cap, allowing user to work with steel-headed hammer. Full-length blade protector acts as safeguard during storage. Ranging in size from ¼ to 2 in., chisels come in 3- or 6-piece sets or as 9 single chisels.

This story is related to the following:
Portable Tools

Search for suppliers of: Carpenters' Woodworking Wood Chisels

Combihammers suitable for drilling and chipping.

info@productnews.com (ThomasNet News) — Wed, 30 Jul 2003 08:18:49 -0500

Model TE 46 drills holes 5/8 to 1 in. in diameter and provides light duty chiseling. Models TE 56 and TE 56-ATC are suitable for drilling anchor holes and through holes, as well as medium chiseling. They can drill up to 3 9/16 in. dia holes in concrete. Active Torque Control provides added operator protection by constantly monitoring rotation of tool and disengaging drive system if it senses housing beginning to rotate to quickly.

This story is related to the following:
Machinery and Machining Tools
Portable Tools

Search for suppliers of: Chipping, Pneumatic & Hand Chisels | Hammer Hand Drills