ThomasNet Industrial Newsroom -

Electronic Thermocutter weighs 11-½ oz.

info@productnews.com (ThomasNet News) — Mon, 19 Jan 2009 08:42:11 -0500

With transformer replaced by high-tech electronics, AZTC-20 electronic thermocutter cuts synthetic fabrics, plastic tubes, fiber optics, foam and similar materials that tend to crimp, serrate or unravel when cold cutters are used. Temperature in unit is controlled from zero to 1050ºF, while electrical current control switch allows selection of large blades. Cutting foot accessory lifts synthetic fabric or thin plastic off cutting surface before coming in contact with heated blade.

This story is related to the following:
Textile Industry Products
Machinery and Machining Tools

Search for suppliers of: Fabric Cutters | Fibre Cutters | Foam Cutters | Plastic Cutters | Thermocutters

Multi Material Cutter delivers 600 lb of cutting force.

info@productnews.com (ThomasNet News) — Thu, 20 Nov 2008 07:54:13 -0500

Microprocessor-controlled MMC200 cuts round or flat material up to 3.94 in. wide and 5/8 in. thick and can be programmed to cut any length (in. or mm), with 1% or better tolerance. It is also programmable for up to 99 batches and 10 fixed feed rates. MMC200 is rated to cut up to 7,592, 2-in. pieces/hr through makerials such as copper wire and cable, silver solder, power cords, cellophane, fiberglass sleeving, latex, fabrics, belting, flat and ribbon cable, strapping, hosing and tubing.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products
Portable Tools
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Tubing Cutters | Hose Cutters | Fabric Cutters | Cable Cutters | Belt Cutters

Conveyorized Cutters target apparel and flexible materials.

info@productnews.com (ThomasNet News) — Thu, 07 Aug 2008 07:46:49 -0500

Supplied with CutWorks® software for full automation, single-ply GERBERcutter® Models DCS3600/3600L include TargetVision digital camera technology for capturing detailed images of materials placed on cutting table. AutoMat System, which addresses requirements of specialized mat industry, uses scanner technology that recognizes where mat's carpet and rubber border meet. With longer cut window, Model DCS3600L enables manufacturers to cut pieces up to 10 ft in length between bites.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products

Search for suppliers of: Fabric Cutters

High Speed Sheeter delivers precision (0.25 mm) cutting.

info@productnews.com (ThomasNet News) — Mon, 30 Jun 2008 07:32:38 -0500

Roll-Blade RQS incorporates optimized web-air-transport system, Airstream II, which optimizes performance levels while minimizing energy consumption and noise. Available with speeds to 50,000 and 60,000 cp/h, sheeter enables important process parameters to be adjusted centrally during production. Papers of different quality can be used without problems, and Web Snap system avoids paper wraps at low paper weights.

This story is related to the following:
Services
Textile Industry Products

Search for suppliers of: Sheeters | Sheeting Machinery

Multi-Ply Cutter features automated knife technology.

info@productnews.com (ThomasNet News) — Tue, 24 Jun 2008 07:41:01 -0500

With programmable machine settings, GERBERcutter® Z7 multi-ply cutter helps maximize throughput and yield while cutting intricate shapes, multiple hole sizes, and notches. It is suited for full range of material types and thicknesses, including bi-laminate foams, technical textiles, and high-loft fabrics. Product targets automotive, aerospace, and technical textiles markets.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products

Search for suppliers of: Fabric Cutters | Foam Cutters

Miniature Rib Milling Cutters handle difficult material.

info@productnews.com (ThomasNet News) — Wed, 17 Mar 2004 07:39:59 -0500

Hanita square- and ball-nosed end mills, designed for mold and die machining, cut materials such as graphite and steels hardened to 60 Rockwell C at speeds to 150 m/min. Offered in 4 series, Diamond Like Coating or TiAIN coatings are available. Hanita Vision end mills, designed for machining hardened steels up to 67 Rockwell C, operate at speeds to 200 m/min. They give surface finish of 63Ra and come in sizes from 4â�"25 mm dia with length of cut from 8â�"45 mm.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products

Search for suppliers of: Miniature End Mills | Titanium Aluminum Nitride Coated End Mills | Milling Cutters | Textile Rib Cutters

Sheeter features vector drive system.

info@productnews.com (ThomasNet News) — Wed, 10 Dec 2003 07:42:54 -0500

Equipped with variable-frequency vector drive, CompuSheeter II handles materials such as paper, fiberglass, foam, foil, nonwovens, vinyl, rubber, plastic, and insulation. Rate of speed depends on size and type of material and desired tolerance. Unit also comes with 200 lb unwind, tension brake with 3 in. cores, PLC control system, and programmable length control for tolerances of ±1/16 in. Custom programming and configurations are available.

This story is related to the following:
Textile Industry Products

Sheeter offers optional fixed-gap shear.

info@productnews.com (ThomasNet News) — Wed, 06 Aug 2003 07:37:15 -0500

ServoSheeter provides high-speed operation and close tolerance performance similar to rotary sheeter. Down-acting scissor shear cuts clean in short and long increments. Optional fixed-gap shear allows clean cuts through dense materials. Machine features heavy duty components and brushless servo motor for minimal maintenance. Optional Allen-Bradley PLC controls are available, allowing operator to control equipment from remote touchscreen.

This story is related to the following:
Textile Industry Products

Search for suppliers of: Sheeting Machinery

Sheeter offers small footprint for cramped production floor.

info@productnews.com (ThomasNet News) — Mon, 16 Dec 2002 07:44:42 -0500

Roll-Fed Sheeter undwinds 2 different rolls of aluminum foil laminated paper at 90° angle to each other. One roll goes into 45° breakover roller to align both rolls together in same direction, then roll material is spliced together and processed. System maps and detects each splice; spliced sections of web are automatically rejected. Roll material is sheeted to precise lengths, and conveyor delivers sheets to next step in processing line.

This story is related to the following:
Textile Industry Products

Search for suppliers of: Sheeting Machinery

Sheeter/Stacker offers continuous operation

info@productnews.com (ThomasNet News) — Wed, 05 Jun 2002 07:56:30 -0500

Non-Stop Inline Sheeter/Stacker takes material coming off production system and sheets it; sheets are then stagger-stacked onto pallets that are automatically changed out when full. Festoon-type accumulator allows on-the-fly change out. While pallets are being changed, accumulator collects web so web does not have to stop.

This story is related to the following:
Machinery and Machining Tools
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Textile Industry Products

Search for suppliers of: Sheeting Machinery | Stacking Machinery | Sheet Stackers | Automation Equipment

Slitter/Sheeter offers shaftless unwind.

info@productnews.com (ThomasNet News) — Mon, 22 Apr 2002 07:45:41 -0500

Roll-Fed System slits and sheets rolls of material weighing up to 8,000 lb. Material is slit, accumulated through controlled gravity loops to restrict material stretch, and cut using gap shear cutter. Gripper stacker grabs sheets and stacks them for use. Operator needs only to load roll, adjust sheet length and slit width, and unload stacks of finished material for next processing operation.

This story is related to the following:
Machinery and Machining Tools
Services
Textile Industry Products

Search for suppliers of: Sheeting Machinery | Slitting Machinery | Sheeters | Slitters | Automation Equipment