ThomasNet Industrial Newsroom -

Multi-Unwind/Rewind System features cantilevered design.

info@productnews.com (ThomasNet News) — Thu, 29 Oct 2009 09:43:10 -0500

Cantilevered Multi-Unwind and Rewind System offers auto edge control that is accurate to ±1 mm, and auto jog that allows material to automatically advance when pulled over load cell roll. System's auto run mode automatically unwinds start tension control when tension set point is reached. Configurable, PID-controlled product allows enable/disable, under/over-wind, tapering, and side-lay of each winder. It is suited for webs up to 18 in. wide with 20 in. roll dia and 100 lb roll weight.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products
Controls and Controllers
Optics and Photonics

Search for suppliers of: Unwinding Machinery | Web Tension Control Machinery | Winding Machinery

Drum Cleaner helps reduce downtime for flexographic printing.

info@productnews.com (ThomasNet News) — Thu, 02 Jul 2009 08:39:01 -0500

Engineered to be automatic roll cleaning system, CI Drum Cleaner is designed for companies printing wide web packaging material and manufacturers of central impression (CI) printing presses. It performs thorough wiping of drum to remove ink, dirt, and slip from its surface. Able to retrofit to most manufacturers' CI printing presses, solution allows for full 24 hr of printing without needing to stop press for manual drum cleaning.

This story is related to the following:
Textile Industry Products
Cleaning Products and Equipment
Printing and Duplicating Equipment

Search for suppliers of: Web Cleaning Systems | Printing Equipment & Supplies | Web Cleaners | Roller Cleaners

Web Drying System produces no carbon emissions.

info@productnews.com (ThomasNet News) — Tue, 09 Jun 2009 08:25:09 -0500

Macrowave(TM) RF Drying System selectively heats coated portions on web leaving bound moisture in substrate intact, preventing overdrying, distortion, and shrinking. It operates at up to 1,500 fpm, with RF power being instant on/off and energy only consumed in proportion to load in system. Configurable to handle webs up to 120 in. wide, RF drying system meets OSHA safety regulations and FCC standards on communication noninterference.

This story is related to the following:
Chemical Processing and Waste Management
Textile Industry Products
Green & Clean

Search for suppliers of: RF Dryers | Web Dryers

Converting Machinery incorporates pelletizing technology.

info@productnews.com (ThomasNet News) — Tue, 24 Mar 2009 08:32:31 -0500

Black Clawson machinery is available with multiple pelletizing features, such as air ring pelletizing system that enables cutting of materials that should not come into contact with water quench media or those with low heat removal requirement. Also, debottlenecking retrofits are available to increase production capacity utilizing X model version. Pelletizer die plate design promotes throughput rate proportional to die plate orifice holes.

This story is related to the following:
Materials and Material Processing
Textile Industry Products

Search for suppliers of: Pelletizers & Pelletizing Equipment & Plants | Converting Machinery

Electronic Thermocutter weighs 11-½ oz.

info@productnews.com (ThomasNet News) — Mon, 19 Jan 2009 08:42:11 -0500

With transformer replaced by high-tech electronics, AZTC-20 electronic thermocutter cuts synthetic fabrics, plastic tubes, fiber optics, foam and similar materials that tend to crimp, serrate or unravel when cold cutters are used. Temperature in unit is controlled from zero to 1050ºF, while electrical current control switch allows selection of large blades. Cutting foot accessory lifts synthetic fabric or thin plastic off cutting surface before coming in contact with heated blade.

This story is related to the following:
Textile Industry Products
Machinery and Machining Tools

Search for suppliers of: Fabric Cutters | Fibre Cutters | Foam Cutters | Plastic Cutters | Thermocutters

Garment Printer is designed for high volume production.

info@productnews.com (ThomasNet News) — Mon, 05 Jan 2009 08:37:35 -0500

Featuring independently controlled dual platen and dual print-head modules, Model GT-782 is capable of printing 2 different designs on separate platens simultaneously. White ink and ink cartridge system promote optimal output quality and 4 industrial-grade print-heads provide optimal printing speed for white ink applications. Along with print area of 16 x 18 in., system features print driver software that can directly interface most graphic applications.

This story is related to the following:
Services
Printing and Duplicating Equipment
Textile Industry Products

Search for suppliers of: Apparel, Clothing & Garment Screen Printing Services | Screen Printing Equipment & Supplies | Textile Printing Machinery

Multi Material Cutter delivers 600 lb of cutting force.

info@productnews.com (ThomasNet News) — Thu, 20 Nov 2008 07:54:13 -0500

Microprocessor-controlled MMC200 cuts round or flat material up to 3.94 in. wide and 5/8 in. thick and can be programmed to cut any length (in. or mm), with 1% or better tolerance. It is also programmable for up to 99 batches and 10 fixed feed rates. MMC200 is rated to cut up to 7,592, 2-in. pieces/hr through makerials such as copper wire and cable, silver solder, power cords, cellophane, fiberglass sleeving, latex, fabrics, belting, flat and ribbon cable, strapping, hosing and tubing.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products
Portable Tools
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!

Search for suppliers of: Tubing Cutters | Hose Cutters | Fabric Cutters | Cable Cutters | Belt Cutters

Conveyorized Cutters target apparel and flexible materials.

info@productnews.com (ThomasNet News) — Thu, 07 Aug 2008 07:46:49 -0500

Supplied with CutWorks® software for full automation, single-ply GERBERcutter® Models DCS3600/3600L include TargetVision digital camera technology for capturing detailed images of materials placed on cutting table. AutoMat System, which addresses requirements of specialized mat industry, uses scanner technology that recognizes where mat's carpet and rubber border meet. With longer cut window, Model DCS3600L enables manufacturers to cut pieces up to 10 ft in length between bites.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products

Search for suppliers of: Fabric Cutters

Drying System dries solvent and water-based inks.

info@productnews.com (ThomasNet News) — Wed, 02 Jul 2008 07:38:28 -0500

Featuring flat or vertical design, Sheet and Web Contact Drying System thoroughly dries wet inks from material surface to top side, avoiding residual moisture problems. System uses heated vacuum plate with transport belt on bottom of material being dried. Integrated heated air blower furthers drying process and helps eliminate solvent fumes. With system, screen printed materials that previously required 2 hours to dry can be dried within 30 seconds.

This story is related to the following:
Chemical Processing and Waste Management
Textile Industry Products

Search for suppliers of: Web Dryers | Ink Dryers

RF Web Drying System can operate at speeds up to 1,500 fpm.

info@productnews.com (ThomasNet News) — Tue, 01 Jul 2008 07:38:42 -0500

Designed for high-speed drying of water-based patterned glue and coatings, Macrowave(TM) RF Drying System selectively heats only patterned coatings on web and leaves bound moisture in substrate intact, preventing over-drying, distortion, and shrinking. It needs 1/3 to 1/5 of floor space required for hot air and IR dryers, and permits lower web temperatures. Unit can handle webs up to 120° wide and meets OSHA safety regulations and FCC standards on communication non-interference.

This story is related to the following:
Chemical Processing and Waste Management
Textile Industry Products

Search for suppliers of: RF Dryers | Textile Dryers

Splicer handles 60 in. dia rolls.

info@productnews.com (ThomasNet News) — Tue, 01 Jul 2008 07:38:29 -0500

Developed for 80-page presses with web width up to 2,400 mm, DLC 6000 Match-Speed Splicer can handle 60 in. diameter rolls at max production speed of 3,540 fpm. Rolls load into paster by automatic roll-handling systems that have adjustable automation level, allowing roll changing without operator. Additional features include split-arms that minimize changeover time when changing web width, integrated infeed unit with 290 daN max web tension, and quick-change 3 and 6 in. chucks.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products

Search for suppliers of: Web Splicers

Match-Speed Splicers suit limited space applications.

info@productnews.com (ThomasNet News) — Tue, 01 Jul 2008 07:38:29 -0500

With splice efficiency rating over 99.5%, MP Series carries newspaper rolls from 40-67 in. wide with roll diameter of 50 in. Rolls can be loaded manually or automatically direct from floor level. Fully automatic chucks are positively locked into core and do not have to be re-tightened during running. Adjustable up to 67 in., split arm permits loading of 2 rolls with different widths. Single and double width models are available with 2- or 4-quadrant drive capability.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products

Search for suppliers of: Web Splicers

High Speed Sheeter delivers precision (0.25 mm) cutting.

info@productnews.com (ThomasNet News) — Mon, 30 Jun 2008 07:32:38 -0500

Roll-Blade RQS incorporates optimized web-air-transport system, Airstream II, which optimizes performance levels while minimizing energy consumption and noise. Available with speeds to 50,000 and 60,000 cp/h, sheeter enables important process parameters to be adjusted centrally during production. Papers of different quality can be used without problems, and Web Snap system avoids paper wraps at low paper weights.

This story is related to the following:
Services
Textile Industry Products

Search for suppliers of: Sheeters | Sheeting Machinery

Multi-Ply Cutter features automated knife technology.

info@productnews.com (ThomasNet News) — Tue, 24 Jun 2008 07:41:01 -0500

With programmable machine settings, GERBERcutter® Z7 multi-ply cutter helps maximize throughput and yield while cutting intricate shapes, multiple hole sizes, and notches. It is suited for full range of material types and thicknesses, including bi-laminate foams, technical textiles, and high-loft fabrics. Product targets automotive, aerospace, and technical textiles markets.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products

Search for suppliers of: Fabric Cutters | Foam Cutters

Nip Stations feature welded aluminum frames.

info@productnews.com (ThomasNet News) — Tue, 18 Mar 2008 07:34:23 -0500

Configured vertically or horizontally, AccuNip® Nip Stations with aluminum frames offer nip loads up to 2,000 lb, while cast iron and steel frame units produce up to 25,000 lb of nip load. Stations can be customized with doctor blades, dual-roll gear drives, heating or cooling rolls, and adjustable nip pressures and gaps. Light- and medium-duty models are suited for laminating, thermal bonding, web heating/cooling, and web pulling or squeezing.

This story is related to the following:
Machinery and Machining Tools
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Portable Tools
Textile Industry Products

Search for suppliers of: Web Handling & Processing Machinery | Laminating Machinery | Nippers

Roll Spreader optimizes material alignment, utilization.

info@productnews.com (ThomasNet News) — Wed, 01 Aug 2007 07:44:03 -0500

GERBERspreader XLs125 ensures material rolls weighing up to 160 lb are spread without tension and that edges are perfectly aligned. Capable of spreading woven or knit materials in roll or flat form for variety of applications, machine enables parts to be nested closer to beginning, end, and edges of spread. Windows®-based, icon-driven interface facilitates operation, while fabric roll cradle feed system tilts automatically to facilitate loading and unloading.

This story is related to the following:
Machinery and Machining Tools
Textile Industry Products

Search for suppliers of: Spreading Machinery | Cloth Spreading Machinery

Restoring System salvages roll products.

info@productnews.com (ThomasNet News) — Mon, 30 Jul 2007 07:54:22 -0500

Targeting web-process industry, Roll Restorer utilizes hydraulic pressure to reform damaged cores from 2-12 in. ID. Mobile cart provides storage and mobility while carrying all expander heads and flanges for different core sizes. With Roll Restorer, operators can salvage good product and avoid lost productivity when damaged cores prevent conventional unwind mounting.

This story is related to the following:
Services
Textile Industry Products

Search for suppliers of: Roll Repair | Web Handling & Processing Equipment & Systems

Web Tension Control System offers advanced regulation.

info@productnews.com (ThomasNet News) — Tue, 24 Apr 2007 07:46:50 -0500

Digital controller, Merobel DGT300, provides regulation capabilities for printing, labeling, and converting machinery. Employing Windows-based software, unit contains programming options such as inertia compensation, taper adjustment, on-the-fly management of web turrets, and E-stop torque control in proportion to set point. Solution, operable in closed- as well as open-loop modes, contains 5 built-in memories and one integral power supply.

This story is related to the following:
Controls and Controllers
Textile Industry Products

Search for suppliers of: Digital Controls | Web Tension Controls

Network Appliance comes with web application firewall.

info@productnews.com (ThomasNet News) — Fri, 01 Dec 2006 07:59:11 -0500

Incorporating ModSecurity(TM) v2.0 open source web application firewall, ModSecurity Pro(TM) M1000 appliance includes rule sets for compliance with Payment Card Industry v1.1, as well as protection for Microsoft(TM) Outlook Web Access (OWA). Hardened appliance is built with secure configurations of OS and Apache web server, and uses SSL encryption module to provide network encryption. It also has capability to run antivirus applications to scan uploaded files.

This story is related to the following:
Computer Hardware and Peripherals
Software
Test and Measuring Instruments
Textile Industry Products

Search for suppliers of: Data Security Software | Computer & Network Security Firewalls | Continuous Web Inspection Systems | Network Devices

Strip Shaft allows smooth winding of web materials.

info@productnews.com (ThomasNet News) — Tue, 07 Nov 2006 07:48:02 -0500

Featuring wear-resistant gripping elements and polyethylene centering strips, SRS-2000 self-centering strip shaft creates and maintains consistent axis of rotation for roll. Centering strips support roll as bladders compress during rotation, minimizing roll bounce, and independent bladder control system. Available in 3 and 6 in. diameters, shaft utilizes air activation system with no moving parts.

This story is related to the following:
Mechanical Power Transmission
Textile Industry Products

Search for suppliers of: Shafts | Web Handling & Processing Equipment & Systems