ThomasNet Industrial Newsroom -

Flat Top Chains suit beverage and packaging industries.

info@productnews.com (ThomasNet News) — Mon, 05 Oct 2009 08:27:02 -0500

Suited for nearly all conveying tasks that require flat transport surface, Flexon Flat Top Conveyor Chains are available in plastic and stainless steel versions as both linear and curved tracks. Low-contamination materials fulfill hygiene requirements in beverage and packaging industry. Resistant to chemicals, plastic chains can be cleaned with agents that are either unsuitable for metal chains or would require intensive maintenance.

This story is related to the following:
Mechanical Components and Assemblies
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Stainless Steel Chains | Plastic Chains | Flat Top Conveyor Chains | Conveyor Chains

Cable Drag Chains offer accelerated assembly/disassembly.

info@productnews.com (ThomasNet News) — Wed, 29 Oct 2008 07:46:54 -0500

During installation, individual side links of Murrplastik (MP) 52.2 PowerLine and MP 82.2 HeavyLine chains are assembled angled to each other. After one short turn, distinct click signals that pieces have engaged properly. To disengage, side links are turned back to each other and levered apart with screwdriver. Chains feature heavy-duty connection between frame bridge and side wall, and frame bridge can be removed by unscrewing locks, without any risk of injury, using screwdriver.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Drag Chains

Roller Cable Carriers are suited for crane applications.

info@productnews.com (ThomasNet News) — Mon, 13 Oct 2008 07:42:36 -0500

Developed for indoor/outdoor cranes as well as conveyor systems, System P4 exhibits minimal noise and wear at high speeds - even with loads up to 20 lb/ft. There is almost no weight limit due to center links, and each link has same pitch to minimize vibration in radius. Tested outdoors at speeds to 23 fps over distances of 400 ft, carriers have plastic bridges and grooves along surface so that upper run glides smoothly over lower run. Plastic rollers are firmly integrated into sides.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Cable & Hose Carriers | Conduit & Cable Carriers | Cable Chains | Plastic Chains

Dragline Chain improves rigging weight and productivity.

info@productnews.com (ThomasNet News) — Thu, 31 Jul 2008 07:42:10 -0500

Designed to reduce rigging weight while maintaining flexibility and strength, TwistLink chain is suited for use in hoist and drag applications. Double-pitch design can reduce chain weight up to 18%, while surface area in bite region of each link and cross-sectional strength optimizes wearability. Due to use of H-series alloy, product is resistant to abrasion and impact.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Drag Chains

FireWire Cable is designed for long distance use.

info@productnews.com (ThomasNet News) — Wed, 04 Jun 2008 07:40:50 -0500

Suited for machine vision applications, Chainflex® CFBUS.055 FireWire cable is designed for continuous-flexing and tight bending radii inside Energy Chain® cable carriers. Its bus pairs and supply wires are twisted together with flexible shields and optimized pitch length. Gusset-filling extruded, flame-resistant, TPE outer jacket provides protection required to prevent cable core ruptures. Tested to more than 6 million flex cycles, product supports transmission lengths up to 20 m.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Components and Assemblies

Search for suppliers of: Data Cables | Flame Resistant Electric Cables | Flexible Cables | Cable Chains

Continuous-Flex Cables target USB applications.

info@productnews.com (ThomasNet News) — Tue, 20 May 2008 07:31:13 -0500

Suited for industrial environments requiring USB 2.0 connection, Chainflex® USB Cables provide data transmissions up to 16.4 ft. Cables feature pressure-extruded, flame-retardant, TPE-blend outer jacket; minimum bend radius of 12.5 times outer cable diameter; and operating temperature range of -31 to +158°F. Equipped with overall shield for EMI protection, silicon-free cables are unaffected by high-noise environments where crosstalk is problematic.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Computer Hardware and Peripherals
Mechanical Components and Assemblies

Search for suppliers of: Flexible Continuous Cables | Universal Serial Bus (USB) Cables | Cable Chains

Modular Cable Carrier targets robotic applications.

info@productnews.com (ThomasNet News) — Tue, 25 Mar 2008 07:38:00 -0500

Attached to installation points on any robot, pre-engineered Triflex® RS guides, protects, and extends service life of cables and hoses. Integrated fiber-rod mechanism supports excess cable carrier and cable slack parallel to robot arm and away from robotic work area. It prevents cables from moving beyond minimum bend radius, helping to maintain uninterrupted production flow. System is suited for welding applications in tight areas, multiple-tool applications, material handling, and deburring.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Cable & Hose Carriers | Cable Chains

Steel/AluminumTroughs suit Energy Chain® cable carriers.

info@productnews.com (ThomasNet News) — Tue, 19 Feb 2008 07:42:01 -0500

Guide troughs enable Energy Chains and Energy Tubes to operate with reduced friction over long travel lengths exceeding 16 ft. Available in steel or aluminum, corrosion-resistant aluminum troughs are suited for outdoor and wash down applications, while steel troughs are suited for lighter loads. Troughs are offered as separate components or fully assembled systems, come equipped with glide bars, and can be custom designed for specific application.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Components and Assemblies

Search for suppliers of: Cable Troughs | Cable Chains

Multi-Axis Cable Carriers feature fiber rod assemblies.

info@productnews.com (ThomasNet News) — Wed, 30 Jan 2008 07:30:47 -0500

Developed to protect moving cables and hoses on 6-axis robots, Triflex® R Cable Carriers feature integral fiber rod assemblies with iglide® bearing on moving tips to optimize torsional strength and withstand extreme twisting movements. Available in enclosed and light version, Triflex system is able to move multi-dimensionally in all axes and can twist up to 380° per yard. Tubular design permits cable carrier to glide around exterior of robot without catching.

This story is related to the following:
Mechanical Components and Assemblies
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!

Search for suppliers of: Cable Chains | Cable & Hose Carriers

Rigid Chain incorporates non-magnetic actuator.

info@productnews.com (ThomasNet News) — Wed, 11 Jul 2007 07:50:50 -0500

Made of reinforced plastic and stainless steel, RigiBelt has 2 belts that come together with zipper-like action to form rigid column. Solution moves quietly while telescoping in and out and is stored in compact magazine. Driven with electric motor, chain can handle loads from 2-1,100 lbf, is entirely mechanical, and comes in stroke lengths up to 6 ft unguided. Product suits any kind of positioning in medical equipment and areas where non-magnetic components are essential.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Stainless Steel Chains | Rigid Chains | Plastic Chains

Drum Handling Accessories are heavy-duty powder coated.

info@productnews.com (ThomasNet News) — Wed, 07 Feb 2007 07:15:42 -0500

JET Drum Tongs have 1,000 lb capacity for lifting 55 gallon drums with overhead hoist. Model 262001 works with open top or tight-head steel drums and plastic drums with large or x-Large rings, while 262002 features release lever that allows hooks to fall and then secure drum's rim. JET Drum Lifter bears loads up to 770 lbs and can be used with overhead hoist or hooked from forklift truck. JET Drum Chain Sling is used with hoist and has single-chain capacity of 1,100 lb.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mounting and Attaching Products
Mechanical Components and Assemblies

Search for suppliers of: Drum Tongs | Drum Lifters | Drum Handling Equipment | Drum Slings | Sling Chains

Cable Carrier features easy-to-open, multilink band.

info@productnews.com (ThomasNet News) — Tue, 02 Jan 2007 07:55:12 -0500

Suited for smaller, less complex cable-management requirements, System E1 Energy Chain® is equipped with multilink band that can be shortened or lengthened at will. Band includes 6-15 links, depending on carrier size, and each band of links is connected via flexible snap-open fastener. S-shape motion is possible at any link, and lids of each link open on same side to facilitate cable/hose installation and access. Inner heights and widths start at .39 and .51 in. respectively.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Cable & Hose Carriers | Cable Chains

Roller Chain Drive suits limited space applications.

info@productnews.com (ThomasNet News) — Wed, 11 Oct 2006 07:41:52 -0500

Molded from Nylatron GS, Model A 6M 7-MT is non-conductive, self-lubricating, and available with .1475 in. or 3.7465 mm pitch. Unit link design eliminates need for master link or special tools for assembly. Each link snaps into next one to form any desired length. Measuring .191 in. wide and .108 in. high, non-corrosive, solvent-resistant drive is suited for stylus or pen assemblies in recorders and X-Y plotters, as well as chart roll drives and counter drives.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Drive Rollers | Nylon Rollers | Roller Chains

Cable Carrier uses magnetics to minimize friction and noise.

info@productnews.com (ThomasNet News) — Mon, 04 Sep 2006 07:54:00 -0500

LeviChain system integrates iron content into Energy Chain®, which is placed between 2 attracting magnetic rails. Magnets pull on iron in cable carrier, causing it to float within field of attraction. Split crossbar design allows installation or removal of cables without any tools, and magnetic field will not produce any inductive influence on power or bus cables. Virtually silent with 41.7 dB(A) at distance of 1 yd, system can be installed in horizontal, standing, or hanging applications.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Cable & Hose Carriers | Cable Chains

Cable Carriers withstand temperatures to 1,562°F.

info@productnews.com (ThomasNet News) — Fri, 01 Sep 2006 07:40:34 -0500

High-temperature, chip-repellent version of Systems E2 and E4 Energy Tubes is constructed with igumid HT polymer material, making it suitable for applications where scalding chips or metal fragments are prevalent. Snap-open hinges are located on inner or outer radius of lid according to preference, enabling repair or replacement of cables housed within. Available options include horizontal or vertical cable separators and integrated strain relief.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Cable & Hose Carriers | Cable Tubes | Carrier Tubes | Cable Chains

Continuous-Flex Drive Cables target Allen Bradley systems.

info@productnews.com (ThomasNet News) — Fri, 01 Sep 2006 07:40:34 -0500

Developed for Allen Bradley MP Series industrial automation systems, Chainflex® Continuous-Flex Interconnect Cables have military style circular connectors with TPE-molded back shell for IP67 rating. They use flame, oil, and chemical resistant jacket materials that are UL and CSA recognized. Available for motor, encoder, and brake functions, cables are offered in various configurations, including flying leads and extension cables with bulkhead-style flange connectors.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Components and Assemblies

Search for suppliers of: Flexible Continuous Cables | Cable Chains

Data Cable suits continuous flex applications.

info@productnews.com (ThomasNet News) — Wed, 30 Aug 2006 07:45:26 -0500

Designed for use in Energy Chain Systems®, Chainflex CFLG glass fiber optic cable has minimum bend radius of 10 x cable diameter and operates within permissible temperature range of 23-158°F. With low-adhesion, PVC-based outer jacket and bundled bare-copper wire construction, cable is unaffected by EMI and can be used on crane and conveyor systems as well as for single and interface-free data transmission. Cable comes in more than 600 sizes and styles.

This story is related to the following:
Optics and Photonics
Communication Systems and Equipment
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Components and Assemblies

Search for suppliers of: Data Cables | Fiber Optic Cables | Flexible Cables | Cable Chains

Cable Carriers suit high-speed applications.

info@productnews.com (ThomasNet News) — Wed, 30 Aug 2006 07:45:25 -0500

Featuring side link and stop dog design, System E4/100 Energy Chain® Cable Carriers are maintenance-free, dirt-repellant, and available in 7 styles and up to 42 widths. Units are suited for long travel applications ranging from 656-1,312 ft and deliver optimal performance at up to 26 ft, unsupported. Equipped with snap-open crossbars for cable installation, carriers are available with wide array of mounting bracket, cable separation, and strain relief options.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Conduit & Cable Carriers | Cable Chains

Cable Carrier routes power to storage and retrieval systems.

info@productnews.com (ThomasNet News) — Fri, 04 Aug 2006 03:14:47 -0500

Energy Chain System®, micro Speed-E-Chain, can be used to combine data, copper, and fiber optic cables with power cables or pneumatic hoses. It provides cable protection while operating safely and silently at speeds up to 20 fps. Suited for rack control devices, product consists of Energy Chain installed in aluminum guide trough with rolling attachment on underside through which cables are fed down to machine. Trough top is closed to protect against dirt, dust, and contaminants.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Cable & Hose Carriers | Conduit & Cable Carriers | Cable Chains

Continuous-Flex Cables feature over-molded connectors.

info@productnews.com (ThomasNet News) — Fri, 02 Jun 2006 08:10:45 -0500

Chainflex(TM) CF.INI Cables include sensor/actuator cord set for process automation applications. Insulation and jacket are made from flexible, anti-abrasive thermoplastic polymer containing fire retardants. Non-porous TPE outer jacket also provides chemical resistance. With temperature range of -31 to +212°F, Chainflex CF.INI Cables come with straight or right angle connectors. Over-molded, thermal-plastic connector body is sealed to prevent intrusion of water.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Components and Assemblies

Search for suppliers of: Flexible Continuous Cables | Cable Chains