ThomasNet Industrial Newsroom -

Mandrel Sleeves help unwind/rewind coils.

info@productnews.com (ThomasNet News) — Wed, 16 Apr 2008 07:45:41 -0500

Kastalon Mandrel Sleeves allow coil processor flexibility to unwind or rewind coils that are larger than maximum expansion of mandrel. Manufactured from Kastalon Polyurethane®, they are offered in slip-on or bolt-on versions with or without slot for tail gripper. Thin-walled sleeves prevent damage from coil creases, scratches, and marring; thick-walled units enable adjustments of ID size; and dual-durometer versions provide metal-like hard surface against mandrel with softer outer skin.

This story is related to the following:
Material Handling and Storage Sponsored by: Reid Supply - FREE CAD Drawings of Tens-of-Thousands of Parts!
Mechanical Components and Assemblies

Search for suppliers of: Coil Handling Equipment | Plastic Sleeves

Hot/Cold Pack Covers avert possibility of cross contamination.

info@productnews.com (ThomasNet News) — Thu, 10 Apr 2008 07:34:06 -0500

Intended for use with Therma-Kool® hot/cold gel therapy packs and InstaKool(TM) instant cold packs, disposable Blue Easy Sleeves(TM) act as protective barrier between skin and pack and will not interfere with healing process. Sleeves are non-woven, hand-stitched, and non-porous, helping to minimize chance of potentially spreading infectious skin viruses.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Protective Sleeves | Disposable Sleeves

Ejector Sleeves are optimized for heat- and wear-resistance.

info@productnews.com (ThomasNet News) — Thu, 27 Mar 2008 07:53:17 -0500

Regal ESL H-13 Nitrided Ejector Sleeves, machined from H-13 hotwork die steel, are nitrided on ID and OD surfaces to Rc 65-74 for optimal wear resistance. Offered in 109 standard sizes with IDs from 3/32-¾ in. and lengths from 3-12 in. in 1 in. increments, sleeves can also be produced as specials down to 1/16 in. ID, with varying wall thick-nesses, ID/OD combinations, and lengths to 25 in. Custom front and EDM forms, head flats, vents, and other steels can be provided.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Ejector Sleeves

Sleeves eliminate need to rework worn and damaged shafts.

info@productnews.com (ThomasNet News) — Mon, 19 Mar 2007 07:46:53 -0500

Offering corrosion resistance, stainless steel Speedi-Sleeves® exhibit surface roughness of 0.25-0.51 mm. Units mount by pressing them over damaged shaft surface and do not require power tools or heating. Shafts up to 8.000 in. dia can be equipped with standard models, while shafts with diameters up to 45.000 in. can use LDSLV chrome-plated, carbon steel sleeves. Speedi-Sleeve Gold version features coating that minimizes rate of abrasive wear in contaminated conditions.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Shaft Sleeves | Steel Sleeves

Sleeves and Bushings offer concentricity without adjustment.

info@productnews.com (ThomasNet News) — Wed, 07 Dec 2005 07:05:17 -0500

Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from ¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from .128-1.260 in., accommodate 12 tool bit sizes from 1/8-1¼ in.

This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mechanical Components and Assemblies

Search for suppliers of: Split Bushings | Square Hole Sleeves

Hex Hole Sleeves can replace spliced shafts and bushings.

info@productnews.com (ThomasNet News) — Tue, 06 Dec 2005 07:07:23 -0500

Available in 8 different lengths from ¾-3¼ in., carbon steel Series A 7C20 can be used as sliding couplings, extensions for socket drives, bearing carriers, and as sliding bearings. Broached hex holes maintain tolerance of ±.001 in. and range in width across flats from .128-.628 in. Sleeves can serve as replacement in applications requiring spliced shafts and bushings, where precision tolerances are not required.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Hexagon Hole Sleeves

Ejector Sleeves are custom machined and finished.

info@productnews.com (ThomasNet News) — Wed, 29 Dec 2004 07:52:31 -0500

Custom Ejector Sleeves can be machined from H-13, A10, S-7, and M-2 tool steel, as well as 420 and 440 stainless steels, with 0.0002 in. accuracy on ID and OD and surface finishes to 2 RMS. Sizes range from 0.016 in. ID to 2 in. OD in lengths up to 14 in. long, with or without shoulders. Customized with EDM forms, vent grooves, ribs, and other special requirements, sleeves can be supplied with surface treatments including various nitride processes and plating.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Ejector Sleeves

Braided Split Sleeving features semi-rigid construction.

info@productnews.com (ThomasNet News) — Tue, 28 Sep 2004 07:46:33 -0500

Available in ¼â�"1 in. diameter, Flexo F6 is split laterally and can open up to accommodate variety of bundling requirements. Sleeving will bend to tight radius without puckering or splitting open and will not impair or affect flexibility of harnesses or hoses when installed on machinery. Offering UV resistance, Flexo F6 is rated to 257°F and can be cut with hot knife or scissors.

This story is related to the following:
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Mechanical Components and Assemblies

Search for suppliers of: Braided Tubing | Split Sleeves

Steel Sleeves protect fences from moisture damage.

info@productnews.com (ThomasNet News) — Tue, 23 Sep 2003 08:00:58 -0500

Rail Sleeve System URS (Upper Rail Sleeve) and LRS (Lower Rail Sleeve) models prevent swelling, cracking, and rotting of fence members' exposed ends due to moisture absorption. Made from galvanized steel fashioned into closed-end sleeves, URS models install over sawn ends of horizontal fence rails. Also made from galvanized steel, LRS models are applied to lower horizontal fence member at horizontal plane and over sawn-end that abuts vertical post.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Steel Sleeves | Protective Sleeves | Forged Sleeves

Ejector Sleeves offer expanded lengths to 12 in.

info@productnews.com (ThomasNet News) — Mon, 21 Oct 2002 07:41:21 -0500

Ejector Sleeves are machined from H-13 hotwork die steel and ion nitrided to Rc 65-75 on inside and outside diameters for wear resistance. Precision ground with +.0005-0000 in. ID tolerance and OD tolerance of -/0003-0008 in., standard sleeves are available from 3 to 12 in. long with 3/32 to 3/4 in. IDs. Special Sleeves can be machined from 420 and 440 stainless, A10, S-7, and M-2 steel as well as H-13 hotwork die steel.

This story is related to the following:
Mechanical Components and Assemblies

Search for suppliers of: Ejector Sleeves

Cable Jacket is PVC laminated.

info@productnews.com (ThomasNet News) — Fri, 17 May 2002 07:47:45 -0500

DVH-20 jacketing is constructed from medium-weight, flame-retardant PVC, laminated to both sides of polyester cloth. Reinforced construction provides resistance to wear, tears, and abrasion. Operating temperature is â�"40 to +85 deg C. Jacket is available for flat or round cable bundles from 3/8 to 4 in. in variety of colors.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Mechanical Components and Assemblies

Search for suppliers of: Cable Shields | Plastic Sleeves | Sleeving