ThomasNet Industrial Newsroom -

Immersion Ultrasonic Testing Service provides flaw detection.

info@productnews.com (ThomasNet News) — Wed, 30 Sep 2009 09:02:51 -0500

Using ultrasonic immersion detector, Elektron® Ultrasonix operator can ultrasonically check products to Aerospace Material Specification AMS 2154. Automatic ultrasonic flaw detection within immersion tank removes inherent operator error, enabling repeatable checking of material cleanliness. Supported by K-scan data acquisition and analysis software, machine is custom-built to check both round billet and flat plate or extrusions. Scanning envelope accommodates parts up to 3,000 x 1,000 x 450 mm.

This story is related to the following:
Services
Sensors, Monitors and Transducers

Search for suppliers of: Ultrasonic Inspection Services | Ultrasonic Flaw Detectors | Ultrasonic Testing Services

Inspection Service utilizes industrial rope access.

info@productnews.com (ThomasNet News) — Thu, 06 Aug 2009 08:28:38 -0500

Offering form of work positioning that solves access problems, Industrial Rope Access Non-Destructive Testing Service provides inspection of structures and structural surveys in hard-to-reach areas without using scaffolding, cradles, or mobile elevated work platforms. Since rope access minimizes disruption at ground level, it often allows work to continue during inspection.

This story is related to the following:
Services

Search for suppliers of: Inspection Services | Non-Destructive Testing (NDT) Services

Rope Access Service facilitates quick work positioning.

info@productnews.com (ThomasNet News) — Thu, 21 May 2009 08:29:00 -0500

Developed from techniques used in caving, Industrial Rope Access is suited for testing and inspection of structures, structural surveys, and for conventional and advanced Non-Destructive Testing. Service solves difficult access problems, without using scaffolding, cradles, or mobile elevated work platforms and minimizes disruption at ground level, allowing work to continue during inspection. Target industries include energy, oil and gas, or industrial manufacturing sectors.

This story is related to the following:
Services
Mounting and Attaching Products

Search for suppliers of: Oil & Gas Field Services | Inspection Services | Positioning Systems

Dual-Mode Scanner offers efficient PCB inspection.

info@productnews.com (ThomasNet News) — Fri, 06 Mar 2009 08:29:26 -0500

Allowing inspection time of 60 sec for 4 BGAs, depending on board layout, VT-X series minimizes tact time for in-line, post-solder inspection of PCBs. Dual-mode x-ray inspection system combines CT scanning, to eliminate clutter from bottom side parts while top side is inspected, and high-speed tomosynthesis scanning for when bottom side components are not present. It can inspect boards up to 10 x 13 in. and can also be used with Qup-Navi software to identify root cause of failure.

This story is related to the following:
Test and Measuring Instruments
Services

Search for suppliers of: Automatic Optical Inspection Systems | Printed Circuit Board (PCB) Inspection Systems | X-Ray Inspection Systems

X-Ray Inspection System offers high-speed 3D operation.

info@productnews.com (ThomasNet News) — Tue, 02 Dec 2008 07:48:00 -0500

Based on GigaPixel technology, OptiCon X-Line 3D features real-time, multi-angle image recording that enables test speeds to 40 cm²/s at full 3D PCB capturing. Integrated reconstruction methods, based on digital tomosynthesis, allows defined evaluation of board's single layers. During test of double-sided PCBs, upper and lower sides can be inspected separately within same process run. In-line, modular system enables configuration models for 2D/3D systems with various test speeds.

This story is related to the following:
Services

Search for suppliers of: X-Ray Inspection Systems

X-Ray Systems feature sanitary design.

info@productnews.com (ThomasNet News) — Thu, 18 Sep 2008 07:40:16 -0500

Featuring crevice-free housing, KD7400 Series helps prevent bacteria build-up during food manufacturing. Depending on application, systems routinely detect 0.3-0.8 mm metal sphere contaminants, 0.2/0.3 x 2 mm long wire, and 2.0-3.0 mm glass and stone, while simultaneous mass measurement feature enables accurate weighing and data tracking. IP69K-rated for high-pressure, sanitary washdown environments, x-ray systems are especially suited for meat, cheese, and vegetable processing.

This story is related to the following:
Services
Test and Measuring Instruments

Search for suppliers of: X-Ray Inspection Systems | Food Inspection Equipment & Services | Food Inspection Systems

Inspection Services survey overhead cranes and hoists.

info@productnews.com (ThomasNet News) — Fri, 05 Sep 2008 12:16:31 -0500

Equipped with Panasonic Toughbook, trained and certified technicians analyze hundreds of crane components and deliver concise reports that prioritize equipment deficiencies, from most critical to least critical, identifying issues before they become problems. Inspections ensure regulatory compliance, limit breakdowns, and extend service life of lifting equipment. Preventive maintenance and modernization plans can also be developed after complete inspection.

This story is related to the following:
Services

Search for suppliers of: Inspection Services | Inspection Services | Inspection Services

X-ray Microanalysis System generates accurate results.

info@productnews.com (ThomasNet News) — Tue, 02 Sep 2008 07:41:17 -0500

Genesis Apex system combines X-ray detector, digital pulse processing electronics, and Genesis 6 analytical software to generate solid foundation needed for accurate X-ray microanalysis. Digital pulse processor, DPP III, employs pulse pile-up to provide clean spectrum for analysis as well as processing times capable of handling over 1,000,000 cps. Employing physics and rules-based algorithm, EXpert ID provides element identification in one step.

This story is related to the following:
Test and Measuring Instruments
Services

Search for suppliers of: X-Ray Inspection Systems | X-Ray Instruments

Automated X-Ray System inspects cylindrical containers.

info@productnews.com (ThomasNet News) — Wed, 13 Aug 2008 07:43:35 -0500

Used on production lines running cylindrical containers such as cans and jars, E-Z Tec® XR-51 detects small statistical variations in product that signal contamination or deviation from accepted specifications. System features stainless steel cabinet and utilizes double-beam design for glass-in-glass or metal-in-metal inspection. Along with full remote support facilities and linear array technology, features include auto set-up, 15 in. color touchscreen, and external connectors.

This story is related to the following:
Services

Search for suppliers of: X-Ray Inspection Systems

Program manages equipment inspection and maintenance.

info@productnews.com (ThomasNet News) — Tue, 15 May 2007 07:35:01 -0500

Intended to help plant engineers and maintenance personnel keep below-the-hook equipment compliant with OSHA regulations, pre-packaged LiftTrax Program incorporates inspection protocols that cover hundreds of inspection points for wide range of lifting devices. Certified inspectors perform work in accordance with applicable codes, standards, and specifications. They can be dispatched to report on single lifting device or for all related equipment in entire facility.

This story is related to the following:
Services

X-Ray Inspection System meets 3-A sanitary standard 41-02.

info@productnews.com (ThomasNet News) — Wed, 18 Apr 2007 07:36:40 -0500

Utilizing electronically-generated X-ray technology, NEMA 4X rated PowerChek Plus-3A detects and automatically rejects contaminants including metal, stone, bone, glass, and high-density plastics. It can measure product mass, monitor over/underfill, and find damaged or incorrectly packaged product even in metal foil. Designed for packaged products, unit features stainless steel frame, pitched surfaces to prevent liquid pooling, and electrical controls and bearings.

This story is related to the following:
Packaging Products & Equipment
Test and Measuring Instruments
Vision Systems
Services

Search for suppliers of: X-Ray Packaging Inspection Systems | X-Ray Inspection Systems | Machine Vision Systems X-Ray Scanners & Metal Detectors

Inspection Service minimizes equipment downtime.

info@productnews.com (ThomasNet News) — Wed, 16 Aug 2006 07:11:16 -0500

MAINMAN® crane and hoist inspection is multi-point visual inspection of overhead lifting equipment servicing all makes of cranes and hoists. Reports capture data on condition of hundreds of equipment components, alert customers of maintenance problems, and point out areas not in compliance to OSHA standards. Recommendations for preventative maintenance are prioritized by safety conditions, production risks, and inconsequential findings.

This story is related to the following:
Services

X-Ray Inspection Modules automate failure analysis.

info@productnews.com (ThomasNet News) — Fri, 23 Jul 2004 07:58:10 -0500

Inspection modules qfp|module and mlf|module eliminate need for operator to determine pass/fail criteria. Each module provides critical features that measure QFP solder joints found on flat ribbon, L, gull wing lead components, and fine pitch of micro lead frame devices. Each module is based on open algorithm image analysis software, XE². The qfp|module covers all inspection criteria as detailed in IPC-A-610C standard. Products suit PCBA assemblers and IC packaging companies.

This story is related to the following:
Software
Test and Measuring Instruments
Services

Search for suppliers of: X-Ray Inspection Systems | Inspection Equipment | Failure Analysis Equipment | Inspection & Testing Software

Camera System inspects underground pipes.

info@productnews.com (ThomasNet News) — Thu, 17 Apr 2003 07:37:27 -0500

RavenEye® self-leveling push camera system for inspection of main lines, laterals, and drain pipes utilizes digital video stored on Sony® Memory Stick® to document pipe conditions. Unit features self-leveling picture, 512 Hz sonde transmitter, 165 ft. fiberglass cable, and 5 in. color LCD with on-screen footage counter. Camera records color video footage and is surrounded by 36 white LEDs that illuminate large diameter lines.

This story is related to the following:
Test and Measuring Instruments
Vision Systems
Services

Search for suppliers of: Visual Inspection Devices | Visual Inspection Cameras | Sewer Pipe Inspection & Testing Services