ThomasNet Industrial Newsroom -

Centrifuge targets stage 1 lactose dewatering position.

info@productnews.com (ThomasNet News) — Tue, 01 Sep 2009 08:31:37 -0500

Short Bowl Decanter sedimentation centrifuge for stage #1 lactose dewatering position features overhung bowl and scroll with bearing support at drive end only, allowing for simpified inspection after CIP cleaning by removing bolts on front cover to see discharge end of bowl and scroll. Removable inspection panels on housing allow for visual inspection of outside of bowl and shaft and seal area between back of bowl and product housing back partition.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Dewatering Equipment | Decanter Centrifuges

Centrifuge offers feature set for productivity and safety.

info@productnews.com (ThomasNet News) — Thu, 05 Mar 2009 08:37:30 -0500

Heated Oil Test Centrifuge incorporates LCD touchscreen control panel that can be used to govern centrifuge rotation speed, turn heat on/off, set duration of test, and choose type of rotor assembly and corresponding glassware to be used during test. Manufactured to meet Class 1, Division 2 explosion resistant rating, system conforms to range of Standard Test Methods and features top-opening lid that provides access to rotor and tube holders and features 18½ in. dia viewing window.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments
Lubricants
Mining, Oil Drilling & Refining
Chemical Processing and Waste Management
Laboratory and Research Supplies and Equipment

Search for suppliers of: Viscosity Testers | Tribology Testers | Lubricant Testers | Petroleum Testing Equipment | Petroleum Testing Instruments | Distillation Equipment | Laboratory Centrifuges | Centrifuges | Oil Testers

Centrifuge System comes in single- and dual-stage models.

info@productnews.com (ThomasNet News) — Wed, 01 Oct 2008 07:36:04 -0500

Designed to automatically separate fine particulate from water-based solutions in metal parts deburring equipment, self-cleaning Centrifuge Recycling System produces waste in form of clay-type material that is environmentally safe and has no special removal or disposal restrictions. Single-stage SSC-40 handles small vibratory finishing applications, while dual-stage DSC-40 provides higher efficiency cleaning. Both process up to 40 gallons of incoming liquid/hr.

This story is related to the following:
Waste Handling Equipment
Laboratory and Research Supplies and Equipment
Chemical Processing and Waste Management

Search for suppliers of: Recycling Systems | Solid-From-Liquid Centrifuges | Centrifugal Separators

Centrifuge minimizes cycles while optimizing workflow.

info@productnews.com (ThomasNet News) — Tue, 02 Sep 2008 07:41:16 -0500

Super-speed Centrifuge Workflow Solution can be configured with 1 x 4L FIBERLite® carbon fiber rotor and Sorvall® RC-6 Plus or 1 x 6L FIBERLite carbon fiber rotor and Sorvall Evolution centrifuge. Use of Nalgene® 1L super-speed centrifuge bottles enable scientists to centrifuge up to 6 L of sample at speeds that create forces up to 15,810 x G. System is suited for pelleting and separating large volumes of cell harvests.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Laboratory Instruments | Laboratory Centrifuges

Centrifuge System offers 3 L capacity.

info@productnews.com (ThomasNet News) — Thu, 19 Jul 2007 07:37:26 -0500

Suited for sample preparation processes, Heraeus® Multifuge® 3 Plus Centrifuge Series comes with 9 swinging-bucket rotor configurations and 7 fixed-angle rotors. Carbon fiber rotors allow for g-forces, delivering 14 x 50 mL conical tubes, 8 x 50 mL conical tubes at over 24,000 g, 6 x 250 mL bottles at 18,500 g, 48 x 1.5/2 mL at over 24,000 g, and 28 x 50 mL conical tubes. For blood tube processing, adapters deliver capacity of 108 x 5 or 7 mL and 84 x 10 mL collection tubes.

This story is related to the following:
Chemical Processing and Waste Management
Laboratory and Research Supplies and Equipment

Search for suppliers of: Sample Preparation Equipment | Laboratory Centrifuges

Benchtop Centrifuges suit routine clinical applications.

info@productnews.com (ThomasNet News) — Mon, 08 Jan 2007 07:49:54 -0500

Available in air-cooled and refrigerated versions, Heraeus® Megafuge® 11 Series offers rotors and accessories to support variety of sample preparation needs. Units accept up to 60 Vacutainer tubes, as well as 16 x 50 ml conical tubes, and microplates in sealed containers. Bucket sealing lids provide certified protection and ensure operator safety by keeping hazardous materials contained. AUTO-LOCK® rotor exchange system allows rotor to be locked in place.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Laboratory Centrifuges

Decanter Centrifuge suits Clean-In-Place applications.

info@productnews.com (ThomasNet News) — Mon, 24 Apr 2006 08:21:16 -0500

Used in chemical, dairy, food, coal, and other industries that require solids/liquid separation, SBD over-hung design centrifuge utilizes short bowl decanting section to settle high-density solids from their mother liquor. This style centrifuge is designed to replace dual bearing style units in applications where cleaning is critical to meet FDA and USDA cleaning standards.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Solid-From-Liquid Centrifuges | Decanter Centrifuges

Benchtop Centrifuge removes bubbles from assembly fluids.

info@productnews.com (ThomasNet News) — Tue, 28 Mar 2006 07:04:31 -0500

Used with prepackaged or user-loaded syringes, ProcessMate(TM) 5000 purges medium- to high-viscosity fluids like epoxies, greases, and silicones of bubbles and air pockets that can affect shot-to-shot consistency in pneumatic dispensing processes. Unit purges up to four 3, 5, 10, or 30 cc syringes at a time. Centrifuge includes on-off switch, timer, tachometer, locking lid, and electric brake that quickly stops rotor before lid is opened.

This story is related to the following:
Chemical Processing and Waste Management
Laboratory and Research Supplies and Equipment

Search for suppliers of: Centrifuges | Oil Centrifuges

Centrifuge removes fine grinding solids from oils.

info@productnews.com (ThomasNet News) — Wed, 24 Aug 2005 08:58:55 -0500

Automatic solids discharging centrifuge, Turbo-Separator T40-2 cleans oils without use of filter media. Able to remove 1â�"10 micron particles generated in find grinding operations, system offers process rates up to 40 gpm with solids removal rate up to 44 lb/hr. Centrifuge system is PLC-controlled and includes digital interface and sensors for monitoring operating parameters. Automatic controls sequence process and allow unattended operation.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Solid-From-Liquid Centrifuges

Frictionless Centrifugal Chiller uses magnetic bearings.

info@productnews.com (ThomasNet News) — Fri, 06 May 2005 08:19:36 -0500

McQuay® frictionless centrifugal chiller utilizes oil-free, magnetic bearings in order to attain sound levels as low as 77 dBA. It operates from as low as 0.375 kW/ton IPLV and features full load performance as low as 0.62 kW/ton. Requiring less than 5 A to start, unit uses HFC-134a refrigerant and incorporates MicroTech IIâ"¢ controls with Protocol Selectabilityâ"¢ feature. Variable frequency drives unload chiller to 10% of full load.

This story is related to the following:
HVAC
Laboratory and Research Supplies and Equipment

Search for suppliers of: Centrifuges | Chillers

Mini Centrifuge has space-saving, bench-top design.

info@productnews.com (ThomasNet News) — Thu, 28 Apr 2005 08:01:44 -0500

Requiring less than 6 in. of bench space, Mini Centrifuge provides users with compact size unit for microfiltration and spin downs from walls and caps of microcentrifuge tubes. Interchangeable microtube and strip rotors and adapters accommodate 0.4, 0.5, and 1.5 mL tubes as well as 0.2 mL strips and individual tubes. Translucent lid, which opens with stainless steel hinge pin, turns unit off if opened during use and restarts unit after closing.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Laboratory Centrifuges

Centrifuge removes grinding solids from coolant and oil.

info@productnews.com (ThomasNet News) — Wed, 22 Dec 2004 00:00:00 -0500

Turbo-Separator T18-2 automatic solids discharging centrifuge recycles grinding and polishing fluids by removing 1â�"10 micron particles entrained in fluids. With process rate of up to 40 gpm, system has solids removal rate of up to 20 gal of sludge or swarf per shift and works with single CNC or in-line with central manufacturing cell. Features include automatic controls, digital interface, and sensors for monitoring operating parameters.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Solid-From-Liquid Centrifuges

Microcentrifuge offers quiet operation.

info@productnews.com (ThomasNet News) — Mon, 22 Nov 2004 09:14:49 -0500

High-speed Spectrafuge 16M offers acceleration and deceleration rates of 10 seconds or less, and continuously variable speed control to max of 14,000 rpm/16,000 x g. Unit is supplied with rotor for 18 x 1.5/2.0 mL tubes that can be removed for cleaning and autoclaving. Brushless motor is quiet, even at maximum speed.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Microcentrifuges

Microcentrifuges offer intelligent control.

info@productnews.com (ThomasNet News) — Mon, 22 Nov 2004 09:14:48 -0500

Offered with 10 rotor options, non-refrigerated Z 233 M-2 and refrigerated Z 233 MK-2 utilize microprocessor that controls all run parameters, including accel/decel rate. Hybrid control panel provides knobs for setting parameters and digital displays for viewing values. Speed can be set in rpm or g-force, and conversion program allows both to be viewed during run. Systems use brushless motors capable of attaining speeds to 14,000 rpm/18,620 x g.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Microcentrifuges

Centrifuge handles small-capacity processing.

info@productnews.com (ThomasNet News) — Wed, 04 Aug 2004 07:52:44 -0500

Suited for use in vegetable oil refining and biodiesel production, RSC 30 Centrifuge offers self-cleaning, gas-tight operation. Output capability is 50 tons/day or 5,000 lb/hr.

This story is related to the following:
Machinery and Machining Tools
Laboratory and Research Supplies and Equipment

Search for suppliers of: Edible & Vegetable Oil Processing Machinery | Centrifuges

Centrifuge removes oil and sludge from washers.

info@productnews.com (ThomasNet News) — Mon, 19 Apr 2004 08:03:08 -0500

Model T10-3AQ Centrifuge System removes solids, such as iron phosphate and dirt, as well as oil from parts washers baths. Producing separation force of over 1,100 g, stainless steel components operate within pH range of 2â�"12 and temperatures to 180°F. Unit features heavy-duty, removable liner designed to produce dry solids cake for ease of disposal. Product ships complete with transfer pumps and oil holding tank.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Centrifuges

Centrifuge reduces misting and foaming.

info@productnews.com (ThomasNet News) — Tue, 02 Sep 2003 07:37:42 -0500

Turbo-Separator Model T6 centrifuge separates solids from oil, coolant, or water and includes centrate removal system that reduces misting and foaming associated with metalworking fluids. Unit also offers hinged lid that provides ease of access for cleanouts. In operation, contaminated liquid flows by gravity or is pumped into center feed of rotor and is accelerated to speeds of 3,450 rpm. Product processes oil at flow rates to 8 gpm and water-based fluids to 13 gpm.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Centrifuges

Centrifuge System cleans oil to extend engine life.

info@productnews.com (ThomasNet News) — Thu, 06 Mar 2003 07:51:15 -0500

ROC 5 Envi-ro-fuge System utilizes centrifugal force of over 2,000 G to remove contaminants as small as 0.5 microns. When oil change is required, cleanliness of used oil makes it recyclable. Product takes out abrasive grit, soot, and dirt, and spins them into solid cake that is removed without shutting down operation. By-pass system allows for retrofit installation for engines, generators, pumps, and compressors with 100 gal and larger oil sump reservoirs.

This story is related to the following:
Chemical Processing and Waste Management
Fluid and Gas Flow Equipment Sponsored by: SNAP-TITE INC. Quick Disconnect and Valve Div. - Untitled
Laboratory and Research Supplies and Equipment

Search for suppliers of: Centrifuges | Filtration Equipment | Oil Filters

Chip Wringer accepts any type of metal chip.

info@productnews.com (ThomasNet News) — Tue, 17 Dec 2002 07:38:31 -0500

Vari-Screen centrifuge provides adjustable exposure of wedgewire dewatering screen area, resulting in desired product dryness for all types/configurations of metal chips. Available with motors rated from 10â�"25 hp, product offers capacities from 15â�"160 ft³/hr for cast iron, 20â�"200 ft³/hr for aluminum, and 25â�"240 ft³/hr for steel. Unit provides 550 gravities of centrifugal force and uniform feed distribution. Design offers self-cleaning, horizontal bowl.

This story is related to the following:
Waste Handling Equipment
Laboratory and Research Supplies and Equipment

Search for suppliers of: Chip Wringers | Basket Centrifuges

Centrifuge facilitates small scale testing.

info@productnews.com (ThomasNet News) — Mon, 20 May 2002 09:07:27 -0500

Beaker Centrifuge contains 2 beakers with maximum volume of 1.18 l each to filter and separate. It allows for testing at same G-forces using various filter cloths and wash ratios, as well as simulation of pressurization and drying. Unit is gas tight and totally enclosed. Variable frequency drive allows for high G-forces to be attained. Small cakes and pressure added centrifugation are possible.

This story is related to the following:
Laboratory and Research Supplies and Equipment

Search for suppliers of: Centrifugal Machinery | Centrifuges