ThomasNet News� - Services

Compostable Plastics suit thermoforming and injection molding.

info@productnews.com (ThomasNet News�) — Wed, 22 May 2013 08:27:56 -0400

With processing window of 176–248°F, ecovio® T2308 is suitable for thermoformed trays and cups. Content of ecoflex® compostable polyester ensures material is not too stiff or too brittle so products are not damaged during transportation and storage. Material is translucent and can be sealed with cover films. Dimensionally stable under heat up to 131°F, injection-molding grade ecovio IS1335 can be processed using single- or multi-cavity molds and is suitable for complex and high-quality packaging.

This story is related to the following:
Services

Search for suppliers of: Thermoformed Plastics | Injection Molded Plastics

IP67 Waterproof Connectors are available in overmolded design.

info@productnews.com (ThomasNet News�) — Tue, 21 May 2013 08:33:50 -0400

Built to withstand harsh applications, standard and custom IP67-rated connectors feature watertight seal and are designed to withstand shock, vibration, and corrosion. Injection over-molding, which entails 2 different shots (pre-mold and final mold), increases ruggedization. While pre-mold, made of hard durometer polypropylene, serves as protective encapsulater and helps keep contacts in place, final mold is available in various thermoplastics, such as PVC and rubber.

This story is related to the following:
Electrical Equipment and Systems Sponsored by: Globtek Inc. - Your Power Partner...For Over 20 Years!
Services

Search for suppliers of: Overmolded Cable Assemblies | Overmolding | Waterproof Connectors

Infrastructure Services foster secure, reliable networking.

info@productnews.com (ThomasNet News�) — Thu, 16 May 2013 08:30:25 -0400

As infrastructure-as-a-service (IaaS) solution, Sprint CloudCompute integrates CSC's virtualized, utility-based cloud computing solution with Sprint's cloud-aware Global MPLS network. Latter is congestion-free and designed for low latency and jitter needed to accommodate critical, real-time business applications, while complementary Class of Service (CoS) eliminates bottlenecks in customer networks through prioritization. Web portal provides on-demand provisioning and management capability.

This story is related to the following:
Services

Search for suppliers of: Network Integration Services

IC Engineering Software accelerates design process.

info@productnews.com (ThomasNet News�) — Tue, 14 May 2013 08:31:03 -0400

In addition to providing foundation of design closure technologies, IC Compiler™ 2013.03 features optimizations that enable high-speed design; efficient implementation of final-stage engineering change orders (ECO); and fully color-ready, tapeout-proven support for emerging FinFET-based silicon processes. To enable high-speed clock design, clock estimation is performed during placement to drive physical- and timing-aware clock gating concurrently with clock and data optimization.

This story is related to the following:
Software
Services

Search for suppliers of: Electronic Design Automation (EDA) Software | CAE Software | Integrated Circuit (IC) Design

Injection Molding Services fit almost any requirement.

info@productnews.com (ThomasNet News�) — Thu, 09 May 2013 08:30:37 -0400

With machines ranging in size from 30–550 tons (1 ½–90 oz shot), Emco provides custom molding services, including injection molding, multi-shot injection molding, insert molding, and assemblies. Emco follows project through every stage – from design, assembly, test, and re-test to decorating, packaging, and shipping products. Company also offers value added services including CNC machining, ultrasonic welding, heat transfer decal, and hot stamping and assembly.

This story is related to the following:
Services

Search for suppliers of: Ultrasonic Welding Services | Custom Injection Molding | CNC Machining

Iron Phophate Coating Service serves automotive industry.

info@productnews.com (ThomasNet News�) — Thu, 09 May 2013 08:30:37 -0400

Complimenting other Henkel brand Phosphate coatings, including Manganese and Zinc, Iron Phosphate Coating can be applied by basket or barrel processing, allowing for customer flexibility depending upon individual product. Processing tank sizes of Phosphate operations measure 43.5 x 33.5 x 35 in. with total product weight capacity of 1,000 lb. Offering optimal adhesion, Iron Phosphate Pretreatment can also be used as base coat for powder coating operations.

This story is related to the following:
Paints and Coatings
Services

Search for suppliers of: Phosphate Coatings | Industrial Coating Services | Coating Services

Environmental Simulation Chambers provide material testing.

info@productnews.com (ThomasNet News�) — Thu, 09 May 2013 08:30:37 -0400

Designed for cyclical temperature testing, Model MK masters heat and cold tests from -40 to +180°C, while Model MKF adds humidification system ranging from 10–98% RH and automatic water management. For low temperatures from -70°C, Model MKT is available. Model MKFT, equipped with electronically controlled humidification/dehumidification system, features temperature range of -70 to +180°C and humidity from 10–98% RH. Available in 53, 115, 240, and 720 L sizes, all have heated viewing window.

This story is related to the following:
Services
Green & Clean
Test and Measuring Instruments

Search for suppliers of: Simulation Equipment | Environmental Simulation Laboratories | Temperature/Humidity Chambers | Temperature Cycling Chambers | Environmental Chambers

Environmental Simulation Chamber is offered with water cooling.

info@productnews.com (ThomasNet News�) — Thu, 09 May 2013 08:30:37 -0400

Equipped with optional water cooling, MKF chambers consume 2,200 W, and those with -40 to +180°C range come in 115, 240, and 720 L sizes. At max inlet temperature of 10°C, freshwater routed to cooling system reducing waste heat to produce positive effect on heat compensation, switching rates, and ambient conditions in working environment. Units are also equipped with wastewater and freshwater connection to supply freshwater to humidity system.

This story is related to the following:
Services
Green & Clean
Test and Measuring Instruments

Search for suppliers of: Simulation Equipment | Environmental Simulation Laboratories | Environmental Chambers | Chambers | Environmental Stress Screening (ESS) Chambers | Temperature/Humidity Chambers

Robot-Mounted 3D Scanners work on and off production line.

info@productnews.com (ThomasNet News�) — Wed, 08 May 2013 08:31:00 -0400

Enabling inspection of up to few hundred parts per day with accuracy of up to 0.085 mm in shop floor conditions, MetraSCAN-R™ series includes 2 versions of optical CMM 3D scanners, 70-R and 210-R, designed for automated and robotized applications. System can be fully configured and programmed to meet inspection automation projects requirements for parts of various sizes and shapes, and optical reflectors allow automatic detection of part alignment.<br /> <br />

This story is related to the following:
Services
Optics and Photonics
Computer Hardware and Peripherals
Test and Measuring Instruments
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad

Search for suppliers of: Optical Character Recognition (OCR) Scanning Services | Optical Scanners | Image Scanners | White Light 3D Scanners | Scanners | CMM Probes | CMM Machinery Accessories | Automatic Optical Inspection Systems

Filter-Based IR Analyzers meet fuel blending environment needs.

info@productnews.com (ThomasNet News�) — Wed, 08 May 2013 08:31:00 -0400

InfraCal Biodiesel Blend Analyzer reads out directly in percent biodiesel and can measure blend ratio on-site in 30 sec. This specific-analysis fixed-filter IR analyzer has 0%–100% measurement range and ±0.20% accuracy. Containing linear variable filter and detector array covering 5.4–10.8 μm wavelength range, InfraSpec VFA-IR Spectrometer can measure biodiesel in diesel, ethanol in gasoline, or water in ethanol. This portable spectral range analyzer has usability-optimized PC interface.

This story is related to the following:
Services
Test and Measuring Instruments
Sensors, Monitors and Transducers
Green & Clean

Search for suppliers of: Trade Associations | Spectrometers | Infrared Analyzers

Polyurethane Sealant adds glossy, protective finish to metal.

info@productnews.com (ThomasNet News�) — Mon, 06 May 2013 08:30:57 -0400

CLEARLOK® is water-based polyurethane sealant that adds protective topcoat on most metal surfaces, including iron, steel, and aluminum. Non-polluting with no harmful VOC content, polymer sealant produces coating 0.0001–.00003 in. thick. It is rated for corrosion resistance of 12–24 hr of neutral salt spray or over 100 hr of humidity exposure. Available in 5 or 55 gal drums, product can be diluted with water for application using immersion tank process or with brush.

This story is related to the following:
Adhesives and Sealants
Paints and Coatings
Materials and Material Processing
Services
Green & Clean

Search for suppliers of: Sealants | Removable Protective Coatings | Corrosion Resistant Coatings | Coatings | Black Oxides | Black Oxidizing Finishing, Processing & Treatment Services | Volatile Organic Compound (VOC) Compliant Sealants | Polyurethane Sealants | Metal Sealants | Water Based Coatings | Topcoat Coatings | Thin Film Coatings | Scratch Resistant Coatings

X-Ray Inspection System uses flat panel detector.

info@productnews.com (ThomasNet News�) — Mon, 06 May 2013 08:30:55 -0400

Providing magnification and resolution necessary for real-time electronics imaging/inspection in production tasks, Jade FP employs open, transmissive X-ray tube and radiation-resistant 1.3 MP CMOS flat panel detector. Speed and noise levels at which system captures images, combined with gray scale depth, promote crisp imaging and provide production operators with optimal throughput for decisions on acceptable product quality. Configuration and control promote collision-free inspection.

This story is related to the following:
Laboratory and Research Supplies and Equipment
Services

Search for suppliers of: Real-Time X-Ray Equipment | X-Ray Inspection Systems

Turning Grades have CVD coating, diverse cutting speed ranges.

info@productnews.com (ThomasNet News�) — Thu, 02 May 2013 08:28:20 -0400

While wear- and deformation-resistant NL200 is intended for machining cast iron, wear-resistant NL250 is suited for semi-finishing and finishing applications. Medium and rough machining of steels and cast iron materials with light scale but no interruption can be accomplished with NL300, and NL400 handles medium and rough machining on stainless steel and exotic alloys. Fine grain NL920, with edge security on steels and stainless steels, serves rough and heavy machining applications.<br />

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Portable Tools Sponsored by: Channellock, Inc. - Sweepstakes Ad
Services
Fasteners and Hardware

Search for suppliers of: Metal Cutting Tools | Turning Machinery | Turning Tools | Cutting Tools | Metal Turning | Inserts

X-Ray Detection System meets global food safety standards.

info@productnews.com (ThomasNet News�) — Wed, 01 May 2013 08:26:30 -0400

Designed with wraparound detector to minimize blind spots, NextGuard™ provides thorough inspection for product contamination. System offers multiple contaminant detection algorithms and ability to modify, test, and change detection parameters on-the-fly. QA check mode automates operator audits and record keeping, while removable conveyor facilitates cleaning/service, and detector diagnostics warn when preventative maintenance is needed. Internet remote support hardware/software is included.

This story is related to the following:
Sensors, Monitors and Transducers
Test and Measuring Instruments
Services

Search for suppliers of: X-Ray Detectors | X-Ray Inspection Systems

Preprinted Liners optimize high graphic packaging.

info@productnews.com (ThomasNet News�) — Mon, 29 Apr 2013 08:30:23 -0400

Available in up to 7 colors plus coating, Preprinted Liners are printed with water-based inks so they are environmentally friendly. By printing liner before it is combined into corrugated board, optimized flexographic printing can be achieved. Preprint also minimizes risk of wash boarding or crushing of flutes during printing. Liners can be printed on all flute profiles including B, C, and E flutes.

This story is related to the following:
Packaging Products & Equipment
Services

Search for suppliers of: Pre-Printed Plastic Packaging | Flexographic Printing Services

X-Ray Inspection System withstands harsh washdown environments.

info@productnews.com (ThomasNet News�) — Fri, 26 Apr 2013 08:28:57 -0400

Constructed of 304 stainless steel for sanitary environments, such as meat and poultry industries, E-Z Tec® XR-Clean detects foreign objects such as metal, stone, bone, and glass. NEMA 4/IP69-rated system offers inspection rate of 600 unit/min or 200 fpm, and meets USDA, FDA, AMI, and 3A Dairy standards. Measuring 60 in. in length, system features tool-less disassembly for cleaning, down-shoot beam geometry, touchscreen HMI, and auto learn capabilities.

This story is related to the following:
Sensors, Monitors and Transducers
Food Processing and Preparation
Test and Measuring Instruments
Laboratory and Research Supplies and Equipment
Services

Search for suppliers of: Metal Detectors | Food Inspection Systems | Industrial X-Ray Equipment | X-Ray Detectors | X-Ray Inspection Systems

Product Recovery System removes liquids from packaging.

info@productnews.com (ThomasNet News�) — Fri, 26 Apr 2013 08:28:57 -0400

Providing automated, controlled removal of free-flowing liquids or flow-resistant wet contents from their packaging, ProductSaver® enables 99.95% reclaim of contents for residual re-sale, reuse, or efficient disposal; and reclaim of packaging material for recycling or disposal. System combines package in-feed, package opening, and contents and package separation processes into single-stream sequence. No break-pack or razor knife steps are necessary, protecting personnel from injury.

This story is related to the following:
Machinery and Machining Tools Sponsored by: Haas Automation, Inc. - Category Sponsor Ad
Services
Chemical Processing and Waste Management

Search for suppliers of: Opening Machinery | Resource Recovery Services | Fluid Recovery Systems | Fluid Recycling Equipment

Enterprise Software enhances project, portfolio, work management.

info@productnews.com (ThomasNet News�) — Fri, 26 Apr 2013 08:28:56 -0400

While supporting integration of other business applications, EPM Live v4.4 Project Portfolio Management (PPM) and Enterprise Work Management Platform also provides Salesforce.com sales and executive teams visibility into project and work status. Ideation app, included, lets employees funnel ideas through workflow from idea to conception to project/program/product, and other features include drill down project status reports, project charts and graphs, and dynamic HTML charting controls.

This story is related to the following:
Software
Services

Search for suppliers of: Project Management Software | Enterprise Services Automation Software | Enterprise Resource Planning Software (ERP) | Business Intelligence Software | Project Management Services

Simulation Software supports GPS, GLONASS, Galileo, Beidou.

info@productnews.com (ThomasNet News�) — Fri, 26 Apr 2013 08:28:56 -0400

Agilent N7609B Signal Studio for GNSS software offers real-time and scenario generator options, including PFP for GPS, SFP for GLONASS, UFP for Galileo, and WFP for Beidou. Users can simulate stationary/moving receivers, and functionality also supports custom scenario creation/editing. There are 40 channels for line-of-sight and multipath signals available for any combination of GPS, GLONASS, and Beidou satellite navigation systems; 16 additional channels are available for Galileo system.

This story is related to the following:
Services
Software
Transportation Industry Products
Communication Systems and Equipment

Search for suppliers of: Transportation Simulation Testing Services | Simulation Software | Electromagnetic Simulation Software | Simulation Equipment | Global Positioning Systems (GPS) | Global Positioning Systems (GPS) Generators | Satellite Components, Parts & Systems

Engineering Services meet customer, project expectations.

info@productnews.com (ThomasNet News�) — Thu, 25 Apr 2013 08:29:22 -0400

Without requiring production commitment, standalone Design Engineering services (DES)™ – design, redesign, and reverse engineering – cover everything from design for manufacturability (DFM) cost reduction analysis for next generation of current product to ensuring new product design is tailored for manufacturing environment. Use of DFM principles maximizes product manufacturability, reducing customer investment in parts, procurement, or labor for end product.

This story is related to the following:
Services

Search for suppliers of: Design & Build Engineering Services | Design Engineering Services | Engineering Services | Reverse Engineering Services