ThomasNet Industrial Newsroom -

Controller network-enables traffic controller equipment.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 24 Jul 2008 07:50:49 -0500

Featuring industrial operating temperature range of -40 to 85°C, card-based Digi Connect® N2S-170 provides secure serial-to-Ethernet connectivity for Model 170 traffic controller equipment. Unit includes Web interface for configuration, TCP/IP stack with universal IP address assignment capabilities, and security options based on SSL/TLS and SSH with NIST-certified encryption and intelligent device management capabilities.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

Scalable Controller suits Ethernet/IP applications.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 15 Jul 2008 07:36:52 -0500

Offering embedded control platform for small- to medium-sized applications, ILC 150 VLC includes built-in Ethernet port, which allows for networking and data exchange to supervisory system using Ethernet/IP protocol. Steeplechase VLC 7.2 provides flowchart-based programming tool for ILC 150 VLC, ILC 350 VLC, and S-MAX VLC.

This story is related to the following:
Controls and Controllers
Computer Hardware and Peripherals

Search for suppliers of: Programmable Logic Controllers (PLC) | Network Controllers

Open Host Controller supports provisions of IEEE P1394b-2002.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 14 Jul 2008 07:41:22 -0500

Enabling real-time data applications, XIO2213A PCIe to 1394b controller offers interoperability by supporting 3 bilingual 1394 A/B cable ports at 100, 200, 400, and 800 Mbps. Internal dedicated PCI bus operates at 32-bit, 66 MHz and has pre-fetch agent to optimize PCIe packets for maximum 1394 performance. Unit has packet throughput that exceeds 87 Mbps, 100 MHz differential PCIe common reference clock/125 MHz single-ended reference clock, PCIe adaptive equalization, and eight 3.3 V GPIOs.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Network Controllers | Application Specific Integrated Circuits (ASIC)

Network Controller provides IP based access control.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 09 Apr 2008 07:44:16 -0500

Offering PoE support for controller, reader, and door release, Symmetry Edge Network Controller provides up to 700 mA of power, eliminating need for separate power supply. Utilizing on-board LAN interface, it supports up to 50,000 credentials and 10,500 off-line transactions. Unit can be surface or wall switch mounted on secure side of door, and supports full range of reading technologies including magnetic stripe, smart card, proximity, biometrics, and Wiegand.

This story is related to the following:
Controls and Controllers
Computer Hardware and Peripherals

Search for suppliers of: Access Control Systems | Network Controllers

Server-Class Controllers are multicore-based.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 08 Jan 2008 07:08:54 -0500

Designed for use in PXI or PXI Express systems, Models NI 8352 and NI 8353 rack-mount controllers are based on Intel dual-core Core 2 Duo and quad-core Core 2 Quad processors, respectively. Units can be bundled with MXI-Express or MXI-4 controllers for remote control of PXI or PXI Express chassis, and deliver I/O bandwidth of up to 832 MBps when bundled with MXI-Express kit. Controllers also work with variety of RAID storage configurations with multiple SATA II hard drives.

This story is related to the following:
Controls and Controllers
Computer Hardware and Peripherals

Search for suppliers of: Microprocessor-Based Controllers | Network Controllers | RAID Controllers

GbE Controller integrates both DASH and PMCI protocols.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 26 Nov 2007 07:42:35 -0500

Single chip BCM5761 65 nm GbE controller offers client manageability via web services-based management and security for MS Windows Vista® requirements. It enables IT users to manage PC platforms remotely at any time, regardless of the system state (OS-present, OS-absent, or out-of-service). It offers system authentication/encryption capabilities, along with remote configuration, monitoring, control, diagnostics, and repair of desktop and mobile PCs.

This story is related to the following:
Computer Hardware and Peripherals
Electronic Components and Devices Sponsored by: Lumera Corporation -

Search for suppliers of: Network Controllers | Integrated Circuits (IC)

Ethernet MAC provides network traffic management.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 02 Oct 2007 08:14:58 -0500

Model XRT95L524 24-port, 10/100 and 10/100/1000 Ethernet MAC offers traffic management features for metro access service cards, enterprise core switches, and metro Ethernet boxes. Offering non-blocking wire speed performance, it supports bandwidth of 4 Gbps over SPI-3 interface. It also supports 20x Fast Ethernet and 2 Gigabit Ethernet simultaneously, up to 192 flows, each with up to 8 classes per port, and transmission length of up to 5 km one way.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: I/O Processors | Communications Processors | Ethernet I/O Devices | Network Controllers

LAN Controllers provide advanced PC manageability.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 26 Sep 2007 07:47:24 -0500

Based on DASH Desktop and Mobile Architecture for System Hardware standard, Marvell® Yukon® products include pin-compatible LAN controllers that use common software driver. They enable IT managers to meet challenges of managing organization's dispersed PCs, while coping with demands for data protection, network security, and government compliance.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

Remote Automation Controller uses Smart Wireless technology.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 22 Aug 2007 07:50:03 -0500

With native communications capability for integration of wireless field networks, ROC800-Series Remote Operations Controller promotes remote asset management as well as maintenance efficiency. Centralized access helps users enhance safety and minimize risk of dangerous environments. Allowing communication with instrumentation at wellheads, pipelines, and other remote sites, product extends predictive intelligence of PlantWeb® digital architecture into remote oil and gas locations.

This story is related to the following:
Computer Hardware and Peripherals
Controls and Controllers

Search for suppliers of: Network Controllers | Automation Controllers | Wireless Controllers

PoE Controllers come with 4 ports.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 13 Jun 2007 07:31:56 -0500

Using existing Ethernet cable infrastructure, PoE controllers provide power to networked devices in enterprise, SMB, or residential environments. Model BCM59101 features IEEE802.3af compliance and 15.4 W per port, while Model BCM59103 is compliant with pre-IEEE802.3at and provides 37 W per port for high powered wireless, video, and security technologies. Pin compatible PSE controllers are manufactured in high voltage silicon process technology.

This story is related to the following:
Computer Hardware and Peripherals
Controls and Controllers

Search for suppliers of: Network Devices | Network Controllers | Power Controllers

WLAN Controllers integrate with network security.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 21 May 2007 07:29:39 -0500

Combined with Altitude 350-2 Access Points, Summit WM-Series Switches provide scalable wireless LAN solution for voice, video, and data applications. Products enable IT administrators to apply consistent security and management policies across entire wired and wireless network through single console. For smaller installations, Summit WM200 switches support up to 50 APs with option to upgrade to 100 APs, while WM2000 unit can scale to support capacities up to 200 APs/controller.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

Network Controller supports DASH management initiative.

info@productnews.com (ThomasNet Industrial Newsroom) — Fri, 13 Apr 2007 07:45:25 -0500

Comprised of 10/100/1000Base-T Gigabit Ethernet media access controller with integrated physical layer transceiver, Model BCM5757 supports Desktop and Mobile Architecture for System Hardware, which enables IT professionals to remotely manage desktop and mobile PCs from anywhere. Chipset includes ARM®-based processor, PCI Express® bus interface, and buffer memory, as well as HTTP and HTTPS protocol stacks that support secure communications via remote console.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

CAN Controller offers isolated and non-isolated operation.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 13 Mar 2007 07:43:25 -0500

IP-CAN consists of IndustryPack Module with 2 channels of CAN (Controller Area Network), each of which incorporates SJA1000 and SJA1041 to provide BasiCAN and PeliCAN operation. Each channel is independent and can be programmed to run at different rates. Design utilizes Xilinx FPGA to provide IP interface - IDPROM, Bus interface, registers, and control for CAN controllers. CAN controller is referenced to 24 MHz clock, and 8 or 32 MHz operation is supported.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

Sensor Network System minimizes interconnecting cables.

info@productnews.com (ThomasNet Industrial Newsroom) — Tue, 07 Nov 2006 07:48:04 -0500

Smart Sensors Network System is comprised of distributed sensor instrumentation system with synchronous/simultaneous sampling consisting of smart digital sensors and transducer modules interconnected to Network Interface Controller through multi-drop digital serial bus. Smart Sensors integrate all required measurement functions into small electronic module that can be placed inside transducer. NIC provides gateway between transducer bus and host computer and controls traffic running at 15 Mbps.

This story is related to the following:
Electronic Components and Devices Sponsored by: Lumera Corporation -
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

Storage Controller supports 10 GbE.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 May 2006 08:07:50 -0500

Based on ASIC, integrated storage-virtualization firmware stack, and SMI-S compliant management suite, GigaStorATX(TM) iSCSI Storage Controller eliminates need for server or motherboard technology. It enables iSCSI SAN applications to replace parallel SCSI in DAS and NAS environments, and supplement or replace FC in SAN environments. Controller provides 1,160 MB/sec cache read performance for business continuity, as well as disaster recovery tools such as backup and snapshots.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Small Computer Systems Interface (SCSI) Controllers | Network Controllers | Data Storage Products

Interface Controllers suit datacenter networks.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 08 May 2006 08:07:41 -0500

Intelligent NIC(TM) multi-protocol, intelligent network interface controllers offer dual 10 GbE and native PCIe functionality. Software- and firmware-upgradeable products enable server systems to evolve with changing market needs and adapt to various datacenter workloads. Chip- and board-level devices use operating-system-agnostic approach to protocol offload, and achieve high throughput and low latency suitable for clustering and storage applications.

This story is related to the following:
Computer Hardware and Peripherals
Test and Measuring Instruments

Search for suppliers of: Network Controllers | Interface Boards | Network Interface Cards

Universal Network Controller supports PC/104 expansion.

info@productnews.com (ThomasNet Industrial Newsroom) — Mon, 06 Feb 2006 07:03:51 -0500

Powered by fanless 1 GHz Celeron M or 600 MHz Celeron CPU, UNO-2170 offers connectivity via 4 serial ports (2 RS-232 and 2 RS-232/422/485), two 10/100 base Ethernet ports, and 2 USB 2.0 ports. Unit operates with Windows XP Embedded, Windows CE .NET, and Linux operating systems. Along with 512 KB battery backup SRAM and 256 or 512 MB DDR DRAM, controller incorporates LM sensor that can retrieve CPU and core temperature for monitoring purposes.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

Network Controller has 20 Mbps TCP/IP transmission speed.

info@productnews.com (ThomasNet Industrial Newsroom) — Thu, 07 Jul 2005 08:00:55 -0500

Along with hardwiring of network processes, S1S60020 performs stand-alone serial/Ethernet conversion and sound/audio networking. It uses open source TOPPERS/JSP and TINET for operating system and protocol stack, respectively. All source code is accessible, including that for driver software and Epson sample applications, enabling users to freely customize software. Controller uses S1C33PE 56.25 MHz RISC processor and can be connected directly to 8/16/32-bit CPUs.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

Network Controller includes DeviceNet Safety interface.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 27 Apr 2005 07:57:40 -0500

Safety Network Controller features modularly configured safety functions for programming safety circuits. It can allow safety control and machine control to be performed in parallel via single wiring. Machine conditions can therefore be monitored without requiring other wiring for maintenance. Controller meets guidelines of SIL3 of IEC61508 for functional safety and category 4 of EN954-1 regarding safety of machinery.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Controllers

Expansion Card enables SAN booting of server.

info@productnews.com (ThomasNet Industrial Newsroom) — Wed, 25 Aug 2004 07:34:45 -0500

IBM eServer BladeCenter(TM) JS20 Fibre Channel Expansion Card interconnects BladeCenter JS20 servers with fiber channel-attached storage, delivering highly manageable SAN. Dual-port card offers link speeds to 2 Gbps and enables SAN booting, which can reduce risk of extended system outages that occur in direct-attached storage environments. Product also provides support for AIX®.

This story is related to the following:
Computer Hardware and Peripherals

Search for suppliers of: Network Interface Cards | Network Controllers | Client, Data, File, Network & Web Servers